Zhytomyr Military Institute of Radio Electronics. Admissions Committee Contacts

Gel polishes are becoming increasingly popular among the fair sex, primarily because shellac stays on the nails for quite a long time (2-3 weeks) without chipping or fading, preparation for its application does not injure the nails, and the gel polish itself strengthens the nail plate.

You can do both manicures and pedicures with shellac.

If you do a pedicure with gel polish in a beauty salon, then it is better to immediately prepare a “good” amount, especially if you are a fan of interesting designs, or learn how to do a pedicure with gel polish at home.

The minimum required for applying gel polishes at home

• The first and most important thing you can’t do without is: UV lamp. It is needed to dry the gel polish. It is better to immediately buy a powerful 36 W lamp, in which the coating hardens in 2 minutes. Of course, shellac will harden in a 9 W lamp, but it will take much longer and cause some inconvenience. For example, when performing a manicure or pedicure with gel polish in a low-power lamp, your thumbs will have to be dried separately. Can be used LED lamp. It's expensive, but it dries your nails in 10 seconds.
• Also for work you will need nail file or buff. It is better to choose an abrasiveness of 220-240. You can save money and buy a regular soft polishing file.
• After polishing, you need to treat your nails with a degreaser.. Its cheaper analogues for home pedicure are regular nail polish remover or alcohol. They will cope well with the task. Make sure that there is no lint left on the nail. It is better not to use cotton wool or cotton pads, but to take a soft synthetic napkin.
• For better nail adhesion to shellac professionals usually pre-coat their nails with Bondex. At home, you can do without it and start coating right away from the base.
• It is necessary to apply a base under gel polish., the range of which is very large today. There are bases containing vitamins, base and top in one bottle. There are also a lot of companies.
• Of course, for a pedicure you will need gel polish the gel polish itself. They are often sold in sets, which include the most popular colors. This option for purchasing shellacs is the most budget-friendly. If you can save money on a color coating, then the base and finish should be good quality. The durability and attractiveness of manicure and pedicure depend on them.
• Completes the stage of applying gel polish top coating. It is better to take without a sticky layer.

These are the main components that should be included in a professional shellac pedicure kit. Removing gel polish will also require special knowledge, since it cannot be removed like regular varnish. To remove you will need:

• foil (regular kitchen);
• orange stick (can be replaced with a toothpick);
• cotton pads (cloth napkins);
• manicure spatula.

Pedicure with shellac: step-by-step instructions

The technology for applying gel polish is the same for manicure and pedicure. Make sure the cuticle is removed.

If it has grown a little, then simply move it away with a manicure spatula. The pedicure process itself is divided into the following steps:

• Polishing the nail. It is done for better adhesion of materials to the surface.
• Surface degreasing. If dust particles remain under the gel polish, then there is a chance that it will begin to peel off. A degreaser solves this problem.
• Bondex application. This step will make the adhesion even better and the coating will adhere perfectly. Bondex has a sticky texture and must be applied with a separate brush. A pedicure with shellac coating can be done without Bondex, but it will last less.
• Applying the base. The base should not come into contact with the surface of the skin. In case of contact, carefully remove the coating from the skin with an orange stick. The base is dried in a lamp.
• Applying colored gel polish. If you plan to make acrylic designs on your nails or apply glitter, then this is done at this stage. Colored gel polish can be applied in several layers, each layer must be dried.
• Applying top. This layer is also dried in a lamp.
• Degreaser treatment. If the finish has a sticky layer, simply treat it with a degreaser or nail polish remover.

As you can see, a shellac pedicure at home is quite feasible. It is enough to follow all the rules for application. It’s better not to experiment with the order of application, but you can get creative with designs. It is much easier to make a design with gel polish; it is more viscous and does not harden without a lamp, so it can be easily adjusted.

Drawings need to be applied to a base colored or transparent layer, depending on the idea. In addition to acrylic drawings, you can make a temping design or use ready-made stickers. The design is covered with a top coat and dried in a lamp. It is better to plant pebbles and rhinestones on the top layer before drying. When the layer hardens, the pebbles will “tightly” attach to the nail.

An important point is not only how to do a shellac pedicure, but also how to remove it. Gel polish does not come off like regular polish, but it is also quite easy. To remove it you need:

• Cut a napkin or cotton pad into squares slightly larger than your fingernail.
• Blot them in nail polish remover (shellac).
• Place on your nails and wrap each finger with foil, thus securing the cotton pad with the product. Leave for 15 minutes.
• Remove the foil and discs and remove any remaining shellac with a spatula.

No other methods of removing gel polish have yet been invented. Now you can buy special envelopes for removing shellac, in which you just need to stick your finger and hold for 15 minutes.

Girls always want their legs to look beautiful and well-groomed - both in summer and winter. But few people know that you don’t have to go to a salon for a beautiful pedicure; you can do it yourself at home. This is especially true for those who like to wear sandals in the summer - beautiful and well-groomed toenails are especially important for them.

If a girl has beautiful, well-groomed nails, then she feels confident. Our article will tell you how to properly do a pedicure step by step. We will not use special equipment to perform it at home, which will allow you to enjoy this activity at any time.

Pedicure at home: instructions

This is a completely simple procedure, it won’t take you much time, and the result will make others admire you! There are many ways to do a DIY pedicure at home. We'll consider step by step instructions how to do it right!

Necessary tools

For this you will need:

• high quality scissors and tweezers,
• orange stick,
• wire cutters,
• brush,
• file,
• cotton pads,
• and nail polish remover.

In addition to the above tools for pedicure at home, you must have bath, remover calluses And corns and, of course, cream For legs. You can take any cream that you use daily, be it moisturizing or deodorizing.

Step 2: removing corns. Next, you need to take care of your feet, removing all corns and calluses. They can be removed using a pumice stone or a razor specifically designed for this purpose. Walk the pumice stone in a circular motion over the entire foot - this will help get rid of dry skin. To give a more well-groomed appearance feet - use a scrub. Distribute and massage it onto your feet, toes and between your toes. After this procedure, rub the cream into your feet.

If there calluses And cracks, you can remove them using tweezers.

Step 3: prepare the nail and cuticle. Under no circumstances should you cut the cuticle, just push it back with a stick. You can apply an emollient cream or oil for this. Next, the nails should be trimmed and filed, but do not round their edges. This can lead to ingrown nails and you can’t do it without the help of a specialist.

Don't forget about dirt under your nails! Clean it thoroughly!

Step 4: Applying varnish. The first layer is a transparent nail base. It will protect the surface. Apply colored varnish in one or two layers, allowing each of them to dry thoroughly. Apply a fixing varnish on top to prevent the color from chipping.

This completes the DIY pedicure at home! There is nothing complicated, the main thing is to learn how to do it correctly!

Features of pedicure for older people

Medical pedicure for the elderly at home it is performed in exactly the same way as a regular do-it-yourself pedicure at home. The most important thing here is compliance with the rules of antiseptics top level. Because for them it’s not just about getting their nails in order. This is an opportunity to move painlessly.

The duration of such a procedure will be from forty to eighty minutes.

A hardware pedicure is best for older people because it does not require steaming the feet. Many older people suffer from varicose veins and other diseases for which steaming is not recommended. This method can be done for you any day; the best specialists work in Moscow And St. Petersburg.

How to do a hardware pedicure correctly?

Care should be taken to properly perform a hardware pedicure with your own hands at home. But this activity is quite easy to learn. The main thing is to choose the right device for this.

The main advantage of this type of pedicure is that your feet do not need to be steamed in advance; it is enough to treat them well with an antiseptic.

Hardware pedicure step by step:

1. Cuticle. Here the operation of the apparatus must be very careful. With light movements, you need to lift the cuticle from the center to the edges. And then sand thoroughly;
2. Sinuses of the lateral ridges. Move in the direction of nail growth, away from the cuticle. It is better to use a cutter edge;
3. Nail folds. Light non-stop movements with soft grinding;
4. Treating the skin around the nail. Similar movements, but using an attachment specifically for this operation;
5. Polishing the nail plate. This is where grinding and polishing attachments come to the rescue. This will help remove all irregularities and polish the plate to a shine.

As you can see, do-it-yourself hardware pedicure is quite simple to perform. Hardware manicure is performed according to the same scheme.

Hardware medical pedicure is prescribed in cases where an ingrown toenail, foot fungus, calluses, corns have appeared, or to improve the blood supply to the foot or to treat and prevent cracks.

This procedure should be carried out by a person with medical education, because it requires special knowledge. Wound healing creams and gels and disposable attachments are used, which eliminate the risk of infection.

The most popular devices for hardware pedicure and manicure:

• Saturn 3565 from Planet Nails;
• RM-25000 from Runail;
• Combi from Planet Nails.

Professional equipment will allow you to reduce the procedure time and improve its quality.

Pedicure with gel polish at home

Pedicure with gel polish at home is very easy to do with your own hands. It lasts for more than 3 weeks, and its color does not lose its saturation over time.

For this you will need:

• Gel-varnish,
• Base and coating
• Nail degreaser,
• Cotton pads,
• UV lamp.

Application stages:

1. First, let's remove the old polish, trim the cuticles and take care of the heels. After this, the nail is shaped, if it has not already been shaped.
2. The base coat is applied immediately after degreasing the nail. This coating is kept under the lamp for about 2 minutes.
3. The product is applied in 2 layers, each of which is also dried under a lamp.
4. Top coat and its subsequent polymerization in a lamp.
5. The sticky layer is removed and the oil is rubbed into the cuticle.

• Don't use too much hot water for steaming legs.
• Do not cut the corners of the nails, the nails themselves are at the root.
• Do not cut the cuticle, but only carefully push it back with a stick.
• A bath with sea salt will relieve fatigue from your legs.
• For yellow nails, peeling can help. Peeling from coffee grounds will help.
• To straighten nails and grooves on them, use a special product or base.