Why is my internet speed slow on my computer? Internet slows down. What should I do to get it back to high speed. Decrease in wireless network

Audio card is a device for processing audio on a PC. They come in two types: integrated (soldered to the motherboard) and discrete (installed separately). The first are the most common and represent two basic elements - a microcircuit and a host controller.

Quite often it happens that the computer does not see the sound card or it does not work correctly. This problem is most often found when communicating on Skype and is inherent in both laptops and portable computers. Let's look at the causes of this problem and try to find the best solution suitable for all OS versions, including Windows 7, 8 and 10.

Sound card malfunctions and their elimination:

Drivers

Incredibly often there is a problem with the drivers for the sound card. Based on this, the first step in restoring sound is a thorough check of the availability and relevance of firewood.

To find out their status, you need to go to "". To do this, first go to "Start", then "Control Panel" and open "Hardware and Sound". After that, a window will appear in which you can find the desired item. This is the easiest and fastest way.

Next, we need the “Sound and Video Devices” section, and if an audio card is installed on your PC, then it should be displayed here. Based on this, there are several options for further development of the situation:

Also incredibly important is the order in which drivers are installed. It's next:

After the operating system is loaded, we proceed to install the previously downloaded software.

No codecs for audio

If there is sound during the startup of the laptop or PC, but there is no sound when you turn on the audio or video, then the problem is most likely in the codecs. In this situation, it is recommended to do 2 things:

Also note that you need to not just put them on, but do it right, that is, a complete set. To download, select the full set and select the "Lots of Stuff" mode during installation.

These codecs are compatible with all OS versions, including windows 10.

Incorrect BIOS setting

If the built-in sound card does not work, be sure to check the BIOS and its settings. If the sound playback device is disabled - no matter how you want, but you will not be able to make it work in Windows. However, this problem is extremely rare because this device is enabled by default.

Motherboard failure

Another reason why the computer may not see the sound card installed in it. To check this, connect the component to another PC, if the audio card works, then the matter is in the failed motherboard.

Repairing it yourself without special knowledge of radio engineering is quite difficult, so it is recommended to immediately carry it in for repair.

Nothing helps?

If none of the above methods helped you, then try the following:

1. If before that there was sound, but now it is not there, then it is likely that you have installed some drivers or programs that cause conflicts. In this case, you should try to perform a system restore.
2. If there is a second card, then connect it to the PC and install new drivers on them, be sure to remove the old ones.
3. The card may not be properly installed on the motherboard or connected incorrectly. It is recommended to check this just in case.
4. If all else fails, take a chance and reinstall Windows. After that, install new software, and if the sound appears, then follow it when installing any program. In this case, you will immediately understand what the matter is and find the culprit.

These are extreme measures, however, and they can be beneficial and solve the problem.

Replacing or repairing a sound card

The last thing you can do, and which is always the right thing to do, is to repair or replace the sound card. If her output just wheezes or she finally broke down, then it is clear that the unit will not work correctly and reproduce a good sound.

Thanks to the free upgrade to Windows 10, millions of PC users have replaced their old operating system. This type of upgrade has allowed many users to enjoy all the benefits of the new Windows 10. But as history shows, all new Windows operating systems are not without problems. After updating or fully installing Windows 10, for many users, the sound on the computer stopped working. In this article, we will describe in detail what sound problems can be in Windows 10, as well as describe how to solve these problems.

The easiest method to solve the problem when the sound is gone in Windows 10

Windows 10 can automatically fix audio problems when it stopped working. You can resolve this issue by using the Diagnostics and Troubleshooting Wizard. This master is troubleshooting tool. You can launch this wizard by right-clicking on the standard sound volume control icon, which is located on the taskbar in the notification area.

Now in the context menu that appears, select the item "", which will launch this wizard. After starting, the wizard will immediately run diagnostics, which should identify and fix the sound problem.

In our case, the verification wizard found a problem with a disabled sound card, and we were able to fix the problem.

This wizard often helps users out when there is no sound in the PC.

Lost sound in playback devices after installing updates

Very often, users with Windows 10 have a problem when multimedia speakers and headphones do not play sound after installing updates. In this situation, the strange thing is that the sound is not supplied to the multimedia speakers and headphones, and the operating system still does not see any problems. For example, if the OS managed to detect that there is no sound on the PC, then you can see the corresponding icon on the taskbar in the notification area, which notifies that there is no sound.

In the same situation, everything is in order with the icon. If we go to the device manager, then we will find that the sound card has the name " High Definition Audio device».

If the sound card driver is installed normally, then in its name in the device manager you will definitely find a prefix indicating the sound processor vendor. For example, sound cards from Realtek are named in the task manager as " Realtek High Definition Audio". In our case, there is no such prefix. Usually this situation occurs due to downloaded drivers in a place with Windows 10 updates that the system did not install correctly or the sound card does not support them.

Installing drivers from official sources will help solve this problem.

In the next chapter, we will look at examples of installing drivers on a laptop and a desktop computer. We hope this chapter will answer our readers why the sound does not work after updating Windows 10.

Clean installation of sound card drivers

Windows 10 may not always automatically find drivers for new laptop and desktop sound cards. Also, a dozen may not correctly install the drivers downloaded to it from Windows Update. Therefore, in this example, we will show how to install new drivers for a desktop computer and a laptop from scratch.

For the desktop example, we will use a PC that is based on a motherboard. MSI A88X-G43. This motherboard has a sound card, which is based on a chip Realtek ALC892. You can download the driver for this chip on the official website of the motherboard manufacturer www.msi.com. In our case, the driver represents the 64-bit version for Windows 10 64 bit. After downloading the driver installer, run it.

Installing the Realtek driver is very simple and comes down to a few clicks of the Next > button.

After installation, the installer will prompt you to restart your computer, which we will do.

After restarting the PC, an icon will appear in the notification panel.

This icon will take you to Realtek HD Manager”, where you can fine-tune the sound card.

Installing the driver on a laptop is almost identical to the first example. Let's use a laptop as an example. Acer Aspire V3-372. This laptop is also equipped with a sound chip from Realtek. You can download the driver for this laptop at www.acer.com/ac/ru/RU/content/drivers. After downloading, we will also run it, as in the first example.

After running the installer, we will see the same window as in the first example. The process of installing a laptop driver in our case is identical to a desktop computer. If the sound stopped working on chips not discussed in this chapter, then the principle of installing a driver on them is as similar as possible to the examples considered.

Even for a stationary PC and a laptop, such methods of solving a problem can help when lost sound:

• If your PC lost sound due to the fault of the driver, it is often possible to solve this problem complete reinstallation of the driver.
• When searching drivers for an old PC, the user often encounters a situation where his no for Windows 10. Many manufacturers often abandon older PCs and do not update drivers for them, so they are not available for new OSes. In this situation, they can help drivers designed for Windows 7 and 8. The only thing to pay attention to in this case is the bitness of the OS for which this driver is intended.
• If you downloaded or found on disk very old driver, then it cannot be installed because it does not have support for Windows 10. In this situation, it can help running the driver installer in OS compatibility mode for which it is intended.

Fix playback device settings in Windows 10

There are many options in Windows 10 that improve audio performance. But if your PC is already old enough, then it may abyss sound just because of these improvements. To fix the issue where the sound cuts out, these enhancements must be disabled. To do this, go to the snap " Sound”, which is located on the control panel. You can quickly open this snap-in using the program " Run", by typing the mmsys.cpl command in it

In the window that opens, find the default sound playback device and right-click on it. In the context menu that appears, go to the properties of this device. The playback device can be either speakers or headphones. In the opened properties of the device, open the tab " Improvements».

On this tab, we are interested in a checkbox with the name " Disabling all sound effects". We need to enable this checkbox and click the Apply button to save the settings. After making these settings, check your speakers and speakers for sound.

Back in Windows 10, users can watch crackling sound in headphones or automatic volume reduction. This is also due to the options, which in this case should improve the quality of communication when talking through a PC. Disable these settings can be through the same add-in in the control panel " Sound". Therefore, open this control panel add-on and go to the " Connection».

On this tab, select the radio button No action required” and confirm saving this setting with the Apply button. After making these adjustments, playback quality should improve.

Summing up

In this article, we tried to outline all the ways to solve problems when the sound stopped working in Windows 10. In addition to software problems with sound playback, the user may also encounter faulty headphones and multimedia speakers. Checking this malfunction is quite simple by taking working speakers or headphones from another PC.

Also incorrect connection of headphones and speakers to the front and rear panels may be due to when the sound stopped working. Still quite often there are cases when the sound stopped working when connected to the front panel. This is usually associated with incorrect connection of the front panel to the motherboard or incorrect wiring of the front panel. We hope this article will help you solve the problem when there is no sound in Windows 10, and you can normally listen to your favorite song or watch a new movie.

Related videos

Most laptops contain a built-in sound card that emits a variety of beeps, music, and alerts through the device's speakers.

Various factors can prevent the system from detecting built-in or connected external audio devices, including improper installation and outdated sound card drivers.

Internal devices

Drivers for the internal sound card are installed with the operating system.

Sometimes new versions of sound card drivers can help resolve any issues.

If your laptop does not recognize its internal sound card, the drivers may be corrupted or outdated.

An audio card is a device for processing audio on a PC. They come in two types: integrated (soldered to the motherboard) and discrete (installed separately). The first most common...

The article discusses the reasons due to which there may be problems with the speed of Internet access, not through the fault of the provider.

Slow internet speed due to browser issues.

For the correct operation of the Internet, the User's Browser must meet the following requirements:

Adobe Flash Player version 11 or higher must be installed.

JavaScript support must be enabled.

Disable access functions through intermediate (proxy) servers, including compression (Turbo mode).

How does a torrent client or online game affect speed?

When torrent programs download something, almost the entire communication channel will be occupied by this process. The same is true if you have any online games installed on your PC, when they start they usually check for updates and if any are found, they start downloading them, which also loads the channel and can slow down the speed.

Solution. Turn off the torrent client, make sure no one is playing online or downloading any software updates. After that, you can check your internet speed.

There may be several reasons - freezing or failure of the router itself, in this case, restarting the router will help.

The second reason for slowing down when connecting through a router is fair in 90% of cases. Today, there are routers in almost every apartment, and they all operate at the same frequencies and channels, interfering with each other.

The fact is that in the settings of the router, when setting up a wi-fi network, in addition to the name of the network itself and the password for it, the frequency and channel number on which radio communication will be carried out are also set. Due to the limitation of channel options, there are only 13 of them, the channel numbers of your neighbors' routers may coincide with yours and, while working, will interfere with each other, which affects the data transfer rate.

To better understand the situation, I will give an example from life. When you communicate with someone in the same room, you hear and understand each other perfectly, and now imagine 10 more people are added to the room, who start talking about their own things at the same time, interfering with your communication. Analogy: one room - one frequency!

That is why in the evenings and on weekends, there is so often a decrease in speed when connecting via Wi-Fi. Most of your neighbors, including equipment, overload the radio, creating a kind of "rush hour".

Solution. If your router supports the 5 GHz frequency, use it, it is less loaded, in addition, it is recommended to change the channel number, set any other one different from the one already used from 1 to 13. If this does not help, it is recommended to connect directly via cable, without a router.

Low internet speed due to the laptop itself.

A heavy load on the computer's CPU can also affect the speed of Internet access. Check the CPU load, press the Ctrl, Alt and Del keys at the same time and open the task manager, if the processor is loaded at 90% or more, it makes sense to close some of the programs that load the processor, with the exception of the antivirus of course.

Another reason for the slowdown is overheating of a computer or laptop due to improper operation, when the laptop is lying on a blanket and the air flow to the ventilation inlets is closed. Or, as a result of long-term operation, the insides of the laptop itself are clogged with dust, due to which the ventilation and cooling device does not cope with its task.

Solution. If you have been using a laptop for several years in a row and have never cleaned it, it's time to do it or take your laptop to a service for cleaning.

The impact of viruses on the speed of the Internet.

If your PC has caught a virus, it can also affect its performance in general and Internet speed in particular.

A very large number of people still use various pirated builds of Windows and, in addition, they install a bunch of different broken programs downloaded from torrent sites, and then they are surprised by the constant interruptions in the PC and the presence of viruses.

Solution. Always use licensed software, primarily Windows itself and the antivirus itself, this will reduce the risk of infection. Second, check your PC regularly for viruses.

Congestion of the content source itself - a resource, a site.

It happens that the reason for the low speed does not lie on the side of the provider and the problem is not even in your equipment or its settings, but the resource itself is so overloaded that it is unable to provide a large number of users, for example, high-quality video and automatically downgrades it.

Solution. Check the ability to play high quality video on another resource.

Hello dear readers of the blog site At one time, when I worked as a computer master, I very often had to solve the problem associated with a decrease in Internet speed when connected to the network through a router. The situation when the characteristics declared by the provider are very different from the actual ones is quite common. You can check this with special services, and read the article on how to do it. . Let's look at the possible reasons why the Internet speed drops through the router and how you can solve the problem.

External factors

The most common reason why the Internet speed decreases is not the correct location of the wireless router, but rather its distance from the receiver.

If you have installed your wireless device in the right place and think that the coverage area covers the entire area, then be sure to pay attention to external factors that may cause the Internet speed to drop:

• The router is installed behind the doors of the coupe mirror cabinet (one of the most common mistakes). The mirror works like a screen and packet loss simply occurs, which affects the data transfer rate. In this case, it is enough to take the router out of the mirror simply;
• Reinforced walls. The interlacing of reinforcement, as in the first case, is a very significant barrier;
• The router is installed in close proximity to the electrical panel. Not the most common mistake, but power cables can cause interference (this whole thing is called electromagnetic compatibility)

There are such situations that the Internet cable was removed into the walls during the repair of the apartment and the laying of the external one will spoil the whole aesthetic appearance. In such a situation, you can or as it is also called a repeater. Many users use the second one or simply make it.

Wireless channels and operating frequency

Another reason that speed drops Internet through a router can be a huge number of Wi-Fi networks around you. Most routers operate in the range of channels 1 to 13, these are the devices that operate at a frequency of 2.4 Hz. And if there are a lot of wireless networks in your house, then they corny muffle each other, which leads to a decrease in speed. I will not go into all the details of the occurrence and solution of this problem here, since this is described in detail in the article . But I would like to note that the problem is with a new one, operating at a frequency of 5 Hz and, accordingly, having a larger range of channels from 1 to 60,.

This phenomenon is quite common in new homes. As long as the house is sparsely populated and the number of installed wireless communication points is at a minimum, then people simply do not feel discomfort. However, when the number of networks in the circle gradually begins to increase, just the situation about which I described above occurs.

The figure below shows an example that shows graphs of overlaying channels of wifi networks on top of each other. These graphs clearly demonstrate the employment of certain channels.

The firmware of the router contains errors

It happens that when buying, the throughput is lower than the declared one. Usually drop in speedwifi due to errors in the internal firmware of the router. Also, poor-quality firmware can cause periodic disconnections. Manufacturers of Wi-Fi devices are trying to eliminate all the shortcomings as soon as possible by releasing a new version of the firmware. The updated firmware can be found on the official website of the manufacturer of your router. Read about it on my blog pages.

Installed non-original wifi module drivers

When you reinstalled the operating system yourself and the software was installed automatically on all hardware, or after that you will most likely receive a non-original hardware program. You may get the impression that these devices work correctly, but in fact they do not give out their full performance. Read about it in one of the articles on my blog.

WIFI Router Limitations

The problem with slow internet speed may be due to router limitations. Typically, this situation occurs with owners of devices in the cheap segment (I include Wi-Fi devices costing up to 1500 rubles.)

I want to note that in order to achieve a stable signal and fairly high performance, it is necessary to use equipment (, laptop, phone) from the same manufacturer. Ultimately, this is very difficult to achieve, since gadgets are selected not by manufacturer, but by their characteristics. But this combination will allow you to avoid problems in the future.

Cheap routers very often cut speed for the following reasons:

• WPA network encryption (speed reduction due to the time spent on signal encryption);
• Lots of connections and heavy network usage. Due to the large number of connected devices, the router has to process the information received and transmitted for each device, and the processor of the router from the cheap segment simply cannot cope with the large volume. Intensive use of the network can be attributed to working with a program such as , allowing you to download files from the Internet;

Do not leave the torrent client running if you are not currently using it, and if it automatically starts when you turn on the computer, then I advise you to use it only when necessary.

• Weak signal strength.

Actually, on this, the reasons for which the speed of the Internet falls are exhausted. In order to create a network with a stable signal and high bandwidth in your apartment, you should follow all the rules described in this article. If any of the rules are not observed, then this can greatly affect your work.

If there are visible symptoms of a drop in speed, I also advise you to contact your provider, who can remotely test the line for errors on the port. Sometimes it can be the cause of unstable operation.

I hope this article will help you solve your issue. However, I could not take into account some important points for you due to my inattention or ignorance. If you have information that you can add to the material, then please leave it in the comments field. Also, feel free to leave your questions, which I, or blog readers will try to answer.

So we start by determining what operating system is on our computer. And that our computer meets the requirements for the normal operation of this operating system. To do this, hover over the shortcut Computer, right-click and open properties.

If you have a windows 7 operating system, then the following computer parameters are required for its normal operation.

1. Processor with a clock frequency of 1GHz (GHz) or higher.
2. RAM (RAM) - from 1GB (gigabytes) and above, but preferably, of course, starting with two.
3. Free space on the hard disk is at least 20 GB, but preferably 50, because when updating the OS (operating system) it will increase in size and eat up disk space.
4. DirectX 9 graphics device with WDDM driver version 1.0 or higher.
5. From my experience of using windows 7 as an OS, I will say that these are the minimum tactical and technical data under which it is impossible to achieve high computer speed. Seven compared to XP requires a lot of system resources for its functioning.

Five Possible Causes of Slow Internet Speed

We always follow the path of least resistance:

• We determine the parameters of the computer. To do this, we are guided by the foregoing. The processor may not be able to handle the data stream, especially when downloading files from torrent trackers.
• If you use the Internet Explorer browser to access the Internet, then try to do this by replacing it with Google Chrome, or Mozilla Firefox, I assure you that it helps a lot.
• Check if windows is automatically updated on the computer, the anti-virus system is running, if there is a jump in resources from the Internet, or if some programs are open. web browser. Also check the processor load in the task manager mode, if it is loaded at 100%, then this indicates an overload of the OS (on stationary computers this can be seen from the constantly burning OS process indicator), which means the provider has nothing to do with it.
• Install (if not) a utility on the computer to check the temperature of the main components of the computer. When the processor, motherboard, video card is heated above acceptable standards, the computer freezes completely or partially. Therefore, it is necessary to constantly monitor the processes occurring inside the system unit. I think a small AIDA64 program will be enough to monitor our iron.
• The computer is infected with a trojan virus, spam bot, or some other spyware. Which, secretly from you, turned off the protection and launched processes invisible to us.
  It can send spam, transfer your confidential data, e-mail passwords to its owner, upload any files to the system and thus occupy part of the access channel. The best advice for me was to download the Kaspersky Virus Removal Tool from the official website and scan all local drives for viruses.

Thus, dear PC users, in my opinion, the above may be Top 5 Reasons for Slow Internet Speed. But what you say about this, I think in the near future I will read it in the comments.

And for those who forgot to get useful information

It is almost impossible to imagine your life without the Internet. It allows you to communicate in social networks, download TV shows and movies, make video calls, pay bills, study, work and perform several tasks at the same time. In order to satisfy your needs completely, you need to have a fast speed (S) of the Internet.

Average S is within 100 Mbps. After the connection changes and the Internet connection speed becomes low, blocking the execution of many tasks, users begin to worry about the inability to fully work on the computer and other devices. Accordingly, reasonable questions arise, what lowers the speed of the Internet and how to increase it again.

In order to find out if the Internet is fast, it is recommended:

1. Type in the search "Test Internet speed".
2. Click on the first link in the list on the page.
3. Focus on the dial showing the speed.

Why did the internet speed drop?

The most common causes of slow internet speeds include:

• server limitations, and because of this, unstable high-speed transmission. Some sites do not have sufficient resources to support the maximum S with several dozen users simultaneously;

• lack of resources on the laptop. Simultaneous operation of a large number of programs, an old computer model;
• the provider's restrictions originally stated in the contract: traffic limit, network load, S limit, depending on the time of day;
• congestion of the communication channel due to the operation of background applications: downloading an antivirus program, updating the operating system, the operation of spyware and Trojan utilities;
• misconfiguration of network devices. Incorrectly configured modem, network card, router and other equipment also noticeably affect the speed of the Internet.

What to do if internet speed drops

Consider why the speed of the Internet drops sharply. Its low performance is due to many reasons, conditionally divided into two groups and arising through fault:

1. Subscriber.
2. Provider.

While the ISP appoints a master, tasking him with identifying the cause of the Internet, it is realistic to take some steps on his own, for example:

• change browser. Any utility is capable of failing. It is recommended to try to access the sites, to do this, open, for example, Google Chrom, Yandex, Opera, as well as any other browser and find the appropriate function that allows you to speed up the Internet;
• close the torrent, the game that requires a network connection, commit the changes. If there are several laptops in the apartment, ask them to turn them off and check S again;
• check the router, then turning it off, then turning it on. If this helped, but only for a while, check how the Internet works bypassing the router. If there are no connection problems, it is worth replacing the Wi-Fi device directly. If the provider has assigned passwords and logins to use the Internet, you will not be able to connect directly to the Internet;
• more experienced users are advised to change the channel number for the wireless network, which will also solve the problem of low Internet upload speed. If "Auto" is selected, it is necessary to find a suitable option by selecting a number from 1 to 13. Sometimes the process has to be repeated every few months;
• suspend all programs except antivirus. The problem sometimes lies in the overload of the computer. The task manager, called by simultaneously pressing "Del", "Ctrl", "Alt", will help to check this indicator. With a processor load of 89% or more, there is no fault of the provider.
• clean the laptop by contacting the master. Ensure the smooth functioning of the computer by creating a flow of air to all its openings. The high temperature in the apartment is unlikely to contribute to the stable operation of the equipment;

• check your PC for viruses, then install an antivirus, for example, Dr. Web or MBAM, check again;
• make sure that the low outgoing Internet speed is not associated with a weak filling of the device. To do this, connect through another device. In the same way, the reason for the low speed is found out by technical support experts who leave on the user's call.

Antivirus, firewall

Not a single incoming traffic escapes antivirus checks, which affects the speed of the Internet. Let's figure out what to do if the speed of the Internet connection suddenly drops. The easiest option, but at the same time undesirable, is the complete removal of the antivirus. Instead of the radical method, however, it is possible to set up a soft check mode. To do this, you need to study the capabilities of the antivirus program.

In order to understand why the speed of the home Internet has dropped and whether it is caused by the presence of an antivirus, it is recommended to conduct a small experiment. First, you should check the speed with different antiviruses. Any online service designed to check the speed of the Internet will do. Remember the indicators of 10 tests, calculate the average value of outgoing and incoming traffic.

Disable the antivirus completely, not forgetting about all the component programs. Repeat the previous online test by recording 10 readings. If the test averages with the antivirus turned off are better, it's time to move on to actions, such as replacing the program.

A "firewall" is something that can limit the speed of the Internet in addition to the reasons mentioned. This utility - a kind of filter - is able to monitor computer connections, analyze them, make decisions whether to allow a particular connection. The user himself configures the program, on the basis of which the utility either skips or does not have a certain site. No one will give an absolute guarantee, but the program will seem like a tangible barrier to a hacker.

Proper configuration of the utility is important. Allow connection only to programs that really require it. It is necessary to open access only to certain ports. It may seem difficult to set up, but almost all firewalls have built-in helpers.

Operating system (OS)

The OS is understood as system software that allows you to activate the technical means of a laptop. The most popular types of OS are Linux, Android, Windows and Mac Os. "Operation" manages software modules, coordinates the work of the computer. Unfortunately, the operating system is also capable of acting as a reason for the low speed of the Internet.

Windows OS starts updating in the background at any time. Sometimes it downloads a large amount of unclaimed information. During the installation or download of updates, the Internet speed drops rapidly, sometimes it comes to the laptop freezing. Problems can be avoided if automatic OS updates are changed in Windows settings.

Network card or driver

It is usually not easy to identify that the malfunction is related to the network card. In such a case, the network is usually immediately detected, indicating that everything is connected. With the question "Why did the Internet transmission speed drop?" faced by users of even new computers.

Find out if the failure was due to the network card, perhaps by measuring the speed from another laptop. If this time there are no communication problems, you need to find a replacement for the installed network card. The issue price does not exceed 300 rubles.

A temporary measure will be a forced change of the network card mode to 10 Mbps. It is recommended to select Full Duplex, which can be found in the settings. This does not solve the problem, but is considered a good solution until the network card is replaced or a specialist arrives.

There is also a possibility that the cause of the slow Internet is an outdated or “flying” driver. In this case, opening the "Control Panel", launching the "Device Manager", you will need to download another program to overclock the Internet connection. In the window that opens, you need to find the network card, select it by clicking the right mouse button. In the window that appears, click on Update Drivers.

Router problems

First you need to check the Wi-Fi router, as often the problem lies precisely in it. More often, the following factors are behind the low network transmission speed: firmware failure, overheating, dust ingress into the device. You need to fix the problem, and for this:

• Reboot the router by turning off the power for a minute, then turning it back on.
• If the first item did not lead to the expected result, it is recommended to reboot through the system settings section, namely: the web interface.
• If there is still a further drop in Internet speed, it is recommended to connect directly to the laptop's network card. When the provider provides access via dynamic IP, additional settings do not make sense. If access is provided differently, you need to figure out how to configure settings for direct connection. Check the speed, if it has risen, the last step will be to reset the equipment settings.

• Reset router settings. The corresponding function is located in the system settings subsection. After completing the action, connection parameters will be requested. Even if resetting the parameters did not affect the low speed of the Internet, and the reason lies in the router, there is only one way out - to purchase new equipment, which, with the right choice, will last more than one year.

What happened to the speed of the Internet: external causes

There are a number of malfunctions that entail slow Internet speed. Only the provider can fix the problem. For example, the most common are problems on the line, the influence of the type of connection, and sometimes external factors.

Problems on the line

Sometimes weather conditions are capable of causing a drop in the speed of the Internet or its complete absence: thunderstorm, snow, downpour, strong wind. Only the company's specialists will be able to fix the damage to the traffic transmission cable. Accurate information about the accident will be provided by the provider company.

In order to check the speed, you must:

1. Go to command line.
2. Select the "Ping" command.
3. Put in the line "Ping to the gateway".
4. Wait for an inscription about exceeding the timeout for this request.

Influence of connection type

There are three types of connection to the worldwide network:

1. Cable.
2. Switched.

Less download time is achieved when traffic is transferred from the network over a cable connection. In addition, the quality of the telephone line, as well as the place of residence of the user, affects the speed of the Internet.

External factors

Due to the fact that in the evening a large number of people spend time at the computer, the speed of the Internet is noticeably reduced. If the problem appears in the evening, and during the day everything is fine with speed, the problem lies precisely in this. The signal can be strengthened by sending a letter to the Internet provider with the remark that the Internet speed is lower than stated.

How to restore internet speed

To restore Internet speed, users should adhere to the following recommendations:

• disable advertising banners in the browser: a lot of traffic is spent to display them, pages load more slowly;
• do not allow late payment for the Internet, otherwise the provider will restrict access to it;
• give preference to proven browsers that can provide sufficient speed to process traffic, such as Google Chrome;
• download a good antivirus that immediately intercepts and destroys all viruses.

Find out the reason for the drop in Internet speed, solve this problem by the user himself. There are several ways to solve leading to the desired result. After that, watching your favorite series online will become available again.