This type of needlework, like knitting, was known to people many centuries ago. And if today it can be called a kind of art or just a hobby of some women, since old traditions are forgotten, then knitting used to be a fairly common activity. For example, William Felkin in 1867 suggested that the knitting technique was known during the Trojan War. History has many reliable facts that prove the great popularity of this type of needlework among our ancestors. But even today knitting is developing at a rapid pace: books and magazines on this topic are published, master classes, thematic exhibitions are held, blogs are written on the Internet, etc.
You can knit not only clothes, but also shoes. This is unusual, but very interesting. Let's figure out how to knit slippers with knitting needles. A special master class on how to knit slippers with knitting needles will help us with this!
These slippers are knitted from thick wool yarn, so they are very warm and comfortable. Excellent warmth in winter in cold apartments. Suitable for both men and women. If we knit slippers with knitting needles, we will need only one skein of thick yarn, number 5 knitting needles, markers, and a needle.
The knitting density of these slippers should correspond to the following indicators: 15 loops = 10 cm.
These slippers need to be knitted in one piece on just two knitting needles, and then sewn together along the heel and sole. The pattern is designed for foot size 39. Knitted house slippers are very easy to knit using the instructions below.
We start with the sole. We cast on 58 loops on one knitting needle.
Then we knit the first row in the following sequence: edge stitch, 28 knit stitches, place a marker, 28 knit stitches, edge stitch.
2nd row: edge loop, add one loop from a twisted broach (to avoid the appearance of a hole), 27 knit loops, add one loop, knit 2 knit loops, add one loop again, 27 knit loops, add one loop, edge loop. There should be 62 loops in total.
Row 3: knit with knit stitches.
Row 4: edge loop, add one loop, 29 knit stitches, add one loop, two knit loops, add one loop, 29 knit loops, add one loop, edge loop. There are 66 loops in total.
Row 5: knit with knit stitches.
Row 6: edge loop, add one loop, 31 knit stitches, add one loop, two knit loops, add one loop, 31 knit stitches, add one loop, edge loop. There are 70 loops in total.
Row 7: knit with knit stitches.
Row 8: edge loop, add one loop, 33 knit loops, add one loop, two knit loops, add one loop, 33 knit loops, add one loop, edge loop. There are 74 loops in total.
Row 9: knit with knit stitches.
Row 10: edge loop, add one loop, 35 knit loops, add one loop, two knit loops, add one loop, 35 knit loops, add one loop, edge loop. There are 78 loops in total.
Row 11: knit with knit stitches.
Row 12: edge loop, add one loop, 37 knit stitches, add one loop, two knit loops, add one loop, 37 knit loops, add one loop, knit the edge loop, add one loop. There are 83 loops in total. Remove the marker.
Row 13: knit with knit stitches.
Now we knit top part slipper.
Row 14: knit with knit stitches.
Row 15: edge loops, 36 purl loops, place a marker, 9 purl loops, place a marker, 36 purl loops, edge stitches. There are 83 loops in total.
Row 16: edge stitch, 29 knit stitches, 2 stitches tilted to the left (2 times), 3 loops tilted to the right...
...9 knit stitches, 3 left slant loops, 2 right slant loops (2 times), 29 knit stitches, edge loops. There are 75 loops in total.
Row 17: knit with purl stitches.
18 row: edge loops, 25 knit loops, 2 loops tilted to the left (2 times), 3 loops tilted to the right, 9 knit loops, 3 loops tilted to the left, 2 loops tilted to the right (2 times), 25 knit loops, edge . There are 67 loops in total.
Row 19: knit with purl stitches.
Row 20: edge stitch, 37 knit stitches, 2 slanted stitches to the left, turn the work to the wrong side.
Row 21 (purl): slip the first stitch without knitting, purl 9 stitches, purl 2 stitches together, turn the work to the front side.
Row 22 (front): remove the first loop without knitting, 9 knit loops, 2 loops tilted to the left, turn the work to the wrong side.
Row 23 (purl): slip the first stitch without knitting, purl 9 stitches, purl 2 stitches together, turn the work to the front side.
Rows 24-43: knit as rows 22 and 23 (43 loops each).
Row 44 (knit): slip the first stitch without knitting, 9 knit stitches, 2 knit stitches together, 14 knit stitches, edge stitch. There are 42 loops in total.
Row 45 (purl): edge loops, 24 purl loops, 2 purl loops together, 14 purl loops, edge loops. There are 41 loops in total.
Rows 46-51: knit with knit stitches.
We close the loops.
We sew the slippers along the heel and sole.
As you can see, the patterns for knitting slippers with knitting needles describe the whole process in detail, so you can easily do it yourself.
We offer you a thematic selection of videos, by watching which you will learn even better how to knit slippers with knitting needles.
For beginners:
Tracks on two knitting needles without seams
DIY home slippers
Another video with a detailed description
Without seams, with comments from the master
Slippers with a pattern
Slippers with stripes
On knitting needles in garter stitch
Cute house slippers can be knitted from any yarn. In winter it is better to take a woolen thread, and for the summer you can make slippers on two knitting needles Lilac from cotton. Many people wear shoes with heels - give a gift to your favorite feet - knit the footprints with knitting needles. We have prepared 4 different options for you, simple and complex, so that you can choose the best one for yourself.
Adorable pink slippers are knitted from thick wool yarn. The diagrams are given for three sizes: 22 cm. Foot length - size 35/37 (a), 24 cm. Foot length - size 38/39 (b), 26 cm. - 40/42 (c). We knit on two needles, the third - additional - is needed for the “braid” pattern. The main stitch is garter stitch (knit stitch).
To work you will need:
Knitting density: 10/10 cm = 13 sts/26 rows. Knitting patterns for the left slipper - pattern A 1, for the right slipper - pattern A 2. The pattern depends on the size.
We start knitting slippers on two knitting needles with the left slipper. Cast on 6 mm needles - 36/38/40 stitches - for a/b/c product sizes. Having distributed the loops along the knitting needle, we knit 4 cm in garter stitch. Next, we will knit only on the first 11/13/13 loops, and remove the remaining 25/25/27 stitches on additional stitches. knitting needle While we do not touch this part of the knitting, we work with the first loops. Next, we knit these individual first loops (the top of the slipper with the pattern) like this:
In this way, we knit according to the pattern until we reach a height of 6.5/9/9.5 cm. We knit the last row so as to make 4 decreases. We should get 11/13/13 p.
Now is the hardest part. We have loops for extra. knitting needle, and the upper part of the product. Next we raise the loops of the sides of the top of the slipper, on one side - 12/14/16 sts, and on the other side of the top another 12/14/16 sts. Together with loops with additional. The knitting needles should be 60/66/72 sts. It is most convenient to knit further on circular knitting needles; in the absence of this, we knit on regular additional needles. sp.
Next, we take measurements. We take 1 pin and mark the mark of the toes with it, with the second pin we mark the middle of the heel. Knit 2 cm, and start decreasing one stitch on both sides of each pin (knitting two stitches together). That is, in every r. we decrease 4 points. We make decreases until we reach the height. 5/5/6 cm. Close the loops.
We knit the second, right slipper in the same way as the left one, only knit the top of the slipper according to pattern A 2. Sew the seams on the foot of both slippers. That's all.
Knit slippers from squares - good idea. Knitting is exciting; you can make home slippers with knitting needles in one evening, sitting in front of the TV, or listening to good music. Cute closed slippers knitted in a simple grain and rice pattern will keep your feet warm and add comfort. Slippers on 2 knitting needles, crocheting parts. At the end of the work, the parts are sewn together, as in the diagram. Size 36-39.
To work you will need:
We knit strips in garter stitch: 2 rows of black yarn, 2 rows. orange We knit the main parts with a “rice” pattern and a “grain” pattern. Pattern density: square 10/10 cm = 15 p./15 r.
1st r.: 1 cr., 1 knit., 1 p., 1 k., 1 p., etc.
2nd and 4th rows: how the mating looks.
3rd r.: 1 cr., 1 p., 1 k., 1 p., 1 k., etc.
The second name of this pattern is pearl; there are simply alternating faces. and out. loops.
We assemble the squares following the diagram. For the top of the slipper, sew side C to side D. After the slippers are sewn, on the sides of the squares E, make a crochet stitch with black yarn. First step: do RLS, but from left to right, and not vice versa. We knit the second slipper like the first. Knitted slippers are ready. Both one and the other sneakers are suture, that is, sewn from squares.
Knitted house slippers are a comfortable and necessary thing. These beautiful knitted slippers can be machine washed, they are comfortable and beautiful. Good for a gift, and for yourself, your loved one. A simple version of knitted slippers for beginners. The slippers are decorated with flowers, crocheted, and embroidery woolen threads. There is bead decoration. Product size - from 36 to 40.
To work you will need:
We begin to knit the base of the slipper. We cast on 34 loops on the knitting needles.
Odd rows - like 1st row.
Even rows - like the 2nd row.
35th row: 1 chrome, 11 knits, increase 1 (knit 2 from 1 stitch), 8 knits, increase 1, 11 knits, 1 chrome.
Row 36: knit 1, knit 10, knit 1, knit 12, knit 1, knit 10, knit 1.
37th row: 1 chrome, 34 faces, 1 chrome.
38th - 63rd:
Even rows - like 36 rubles.
Odd R. - like 37 rub.
64th - 72nd - rib 1 k/1 p.
We do not close the loops, leaving a tail. Where there was a series of increases is the place where the foot expands.
Let's start with the sock. Pull the remaining tail through the stitches on the last row. Pull the thread and secure it by tying a knot (Photos 2 and 3). Then sew the part that is knitted with an elastic band + another 8-9 rows (Photos 4 and 5).
You can make the tracks deeper or smaller - it all depends on the number of main loops cast on. Focus on the width of your feet.
Then we move on to the heel. We pass a thread through the middle of the beginning of our knitting (side A) and tighten this middle part. And we sew 2 parts next to each other (B and B) with a neat seam (Photo 7, 8, 9).
This way you get a slipper like this.
Close a chain of 4 VP half-columns into a ring. From the same loop, knit a trail. flail from 4 VP, closing a half-column in a ring (Hook in the 1st st. chain). Make 4 petals in this way. As a result, the connection 4th and 1st petal conn. pillar.
You can decorate your slippers in any way, it all depends on your imagination.
Felt or leather insoles are sewn on for warmth.
Beautiful, cozy slippers with knitting needles with a pompom can be knitted on 5 knitting needles, without a seam. The tracks are knitted quickly; they do not need to be sewn together at the end of knitting. A very simple master class: “Knitting slippers with description” - attached. It is especially relevant for beginner knitters.
To work you will need:
Knitting density: 10/10 cm = 20 p./24 r.
We will make such traces in the same way as knitting a sock.
We cast on 32 loops on the knitting needles.
1st row: all facial.
Row 2: knit 10, purl 1, knit 10, purl 1, knit 10.
3rd row: how the mating looks.
4th row: like 2nd.
For those who have never knitted socks with 5 knitting needles, here is a description of how to make a heel. Or maybe we knew how to do it before, but we forgot the details - let’s refresh our memory. We start forming the heel from the 16th row. For a beautiful heel you need to knit 10 faces. (This side), purl 1, knit 10, purl 2 together. (This is the central part). In the 16th row we attach 1 stitch to the side. Let's turn the work around.
Starting from 17 p.m. We continue to knit only the center of the heel (central part - 12 stitches), adding 2 side parts to it as we work.
So, 17 rubles: remove 1 p., 10 knits, 12th p. center. remove the first stitch, knit the side stitch. face, we transfer the removed one to the knitted one. Next, repeat the 16th and 17th rows, gradually adding 2 side parts. It turns out that in purl. rows of the last paragraph center. parts + first st. side part - knit 2 together purl. And in persons. rows - last point center. remove the first stitch without knitting, knit the 1st stitch of the side stitch, and transfer the removed stitch to the knitted stitch.
Now there are 12 stitches left on the knitting needle. Center. ch. Next - cast on 10 sts along the edge of the side ch. (Look at the photo).
Turn the part over to the other side. We knit all the stitches of the side section, the central section, then cast on 10 stitches along the edge of the other side section. We should have 32 stitches on our knitting needles (see photo).
We continue to knit. Purl r. - K10, p1, k10, p1, k10. Facial r. - facial. We knit to the bone on the leg, on the sole we get beautiful faces. braids. They tied it to the bone, at the end of the faces. row we put 8 loops on the knitting needle, close the knitting in the round.
Distribute all the stitches onto 4 knitting needles and knit in the round in garter stitch. before our little finger closes.
1st knitting needle: knit 1, knit 1, knit 1, knitted and knitted, then all knits.
2nd knitting needle: knit all stitches until there are 3 stitches left on the needle - knit (knit two together, knit 1).
3rd spoke: same as 1st.
4th: same as 2nd.
We knit a spout, cutting stitches every other row, then in each row until there is a stitch left for each. knitting needle 2 loops. We connect all the points. We fold the knitting needles in parallel, and remove 2 at a time. Pull the last stitch inward and secure with a knot.
We decorate the slippers with pompoms.
The video shows how to knit simple slippers very quickly.
Knitting, along with sewing, is one of the types of needlework that allows you to make almost any item of clothing with your own hands. You can knit either light or light. But, besides this, using ordinary threads and knitting needles it is not at all difficult to make even shoes - for example, cozy and soft slippers.
We offer you a master class for beginners, on the basis of which you will learn how to knit slippers on two knitting needles. This takes very little time and requires minimal skills - in particular, the ability to knit knit and purl stitches and crochet stitches. This method is much simpler than knitting on four or even five needles, and is ideal for beginners in this type of needlework.
Please your loved ones with creative handicrafts made by yourself - such slippers can be a pleasant gift for friends and relatives.
On two knitting needles, their types, knitting methods, manufacturing features, we will reveal the secrets of knitting slippers from experienced craftswomen.
Classic slippers look like short socks; only the feet, heels and toes are covered. This type of indoor footwear is very popular, but despite this, slippers that are suitable in size, appearance, and color are difficult to find in the store. But if you have basic knitting skills, it won’t be difficult to make your own slippers with 2 knitting needles. The description is not difficult to understand.
The bound ones will become best friend cold winter evenings. They will warm your cold feet. Footprints made from thin, lightweight thread will allow your feet to “breathe” in the summer. Some women accept them not only as house shoes, but also as beach option. Knit yourself slippers on 2 knitting needles. Even a beginner can handle the description of knitting summer slippers.
Great way to recycle leftovers different threads will be on 2 knitting needles. To make soft and cozy prints, you don’t need a lot of experience as a knitter.
Exists general scheme procedure for knitting slippers on knitting needles:
The fabric of the product can be knitted from individual motifs, but for beginners in needlework it is better to get their hands on it by making one-piece knitted slippers-footprints on 2 knitting needles. It is better to familiarize yourself with the description of the stages of work in advance.
It is quite difficult to knit them on two knitting needles, so let’s consider the manufacturing process on five.
To make cuffs, cast on 56 stitches on a pair of needles number 3, dividing them into 4 needles (14 pieces each).
Tie ten ring rows with an elastic band 1 * 1.
There should be a strip of 4 stitches on the back half of the cuff and a strip of 2 stitches on the front of the cuff.
For the next 12 ring rows, continue knitting the front as before, and behind make 2 vertical stripes from purl stitches.
Heel execution.
Make one circular row, then change the threads from the first knitting needle to the fourth, then use only them. Turn the product over, in each row transfer the starting thread to another needle without knitting, perform 28 rows with granny loops, making vertical columns through the heel.
Heel turn.
Continue knitting in this way until there are 12 stitches left in the work. Then make a circular row on these loops.
Using an empty knitting needle, cast on 15 stitches on the heel side and knit them.
Divide 12 heel stitches into two equal parts, distribute them on 4 and 1 knitting needles.
Knit with knit stitches on needles 1 and 4, and on needles 2 and 3 with an elastic band 1 * 1.
Decreases to form the toe are made at the end of 1 knitting needle and at the beginning of 4, in each row, until there are 14 loops left on each knitting needle.
Knitting a toe.
Decrease every other round until there are 8 stitches left on each needle. Then decrease the loops in each circular row. When there are 2 loops on the knitting needles, cut the thread and tighten.
Make strips in the upper half of the sock. To do this, pick up every second loop along the edge of the beginning of the elastic from the cuff to the toe.
Knit 4 rows with knit stitches.
Make a row for the holes: knit 2 knit stitches at the same time, yarn over, 2 knit stitches.
Additionally knit one purl row. Fasten the loops.
Sew the parts, secure the threads. Sneakers-slippers are ready.
The main advantage of “lazy” slippers is that they are made in pairs at once. You will need two balls of thread and knitting needles. Very easy to make with 2 knitting needles. Let's look at the description.
Throw on 27 loops from the first ball and 27 loops from the second.
K8, p1, k9, p1, k8.
Do the same with the second set of loops.
Face loops.
Up to 23 is the same as row 2.
Shaping socks.
1 knit stitch, 1 purl stitch - repeat 13 times.
Up to the 12th row, knit as the 4th row.
In rows 12 and 13, 27 loops are reduced to 8 in two stages: every 2 loops are knitted together. After completing the 12th row, 14 loops will remain, after completing the 13th row, 8 loops will remain.
Now you need to assemble the slippers. Pull yarn through the last 8 stitches and pull tight. Sew the edges of the product. Lastly, sew the seam that will bring the heel together.
So the slippers on 2 knitting needles are ready. You probably didn’t have any difficulties with the description. To completely match your product with the original, you will need to gain a little patience and experience. Mastery comes with practice. A very exciting activity is knitting slippers on 2 knitting needles. With the passage of time you will not have any problems with the description.
nanbaby.ru - Health and beauty. Fashion. Children and parents. Leisure. Life House