The iPhone is not restored and displays an error. If your iPhone won't turn on: instructions for restoring bricks

Hi all! The topic of restoring iOS firmware has long been discussed on the Internet far and wide. And, to be honest, at first I didn’t want to write about something that was already online. Why produce the same type of instructions? But then it was finally decided (such is the agony of choice for the author of this blog! :)) that there was a need for this.

So why another instruction? It's very simple - I receive a lot of questions, both by email and in the comments, about various glitches in the iPhone software and, in most cases, they can only be cured by restoring the software. So this process is important and there is no way to bypass it, and it will be easier for me to answer your questions by simply pointing out a link to this article. Eh, looks like it was justified :) Let's go!

A few important notes:

1. When you restore an iPhone, absolutely everything is deleted from it. It turns out that the phone looks like you just bought it in a store.
2. You can only restore using a computer and iTunes. This cannot be done over the air, via iCloud or any other way.
3. The procedure is performed both when the device is fully operational, and if the iOS system does not boot (in this case, you will need to enter DFU mode).

By the way, recovery is the only way Correctly remove jailbreak from iPhone.

Detailed instructions for restoring iPhone

So, complete and detailed step-by-step instruction. We launch iTunes on the computer and connect the iPhone, if everything went well, then the phone model, its firmware and other data will be displayed in the main program window. On at this stage two errors are possible:

1. The computer does not detect the iPhone - about this.
2. If the device shows no signs of life, we try.

As a result, with any successful connection we get one of two windows

And here we are interested in only one button - “Restore”. If you simply click on it, iTunes will begin to prepare the iPhone, download the latest current firmware from Apple's servers and begin installing it on the device.

Attention! Find My iPhone must be disabled!

The biggest “catch” is loading the firmware. Sometimes this process takes quite a lot a large number of time, especially with slow Internet. Plus, if the connection is not stable and the connection is possible, then iTunes will start downloading it again every time, which you will agree is not very pleasant and time-consuming.

But there is a way to speed up the recovery process. To do this, you need to independently download the software file in .ipsw format (from any third-party resource, for example w3bsit3-dns.com) and save it on your computer. Please note - each iPhone model will have its own file, different from others!

Now, hold down the “Shift” key on the keyboard and only then click on the “Restore” button. A window will open asking you to specify the firmware file. We select the pre-downloaded one and wait - iTunes will do everything on its own.

Why can't I restore my iPhone and what should I do?

In fact, there can be a lot of reasons. Moreover, they are associated both with a computer or device, and simply with inattention.

Here are the most basic ones:

1. Lack of Internet access on the PC or periodic interruptions and shutdowns.
2. Antiviruses, firewalls and other programs that interfere with the normal functioning of iTunes. Perhaps your security settings are configured in such a way that iTunes simply does not gain access to Apple servers.
3. Slow Internet connection. Not even that. Very slow Internet. This is rare now, but I remember my attempts to revive an iPhone back in 2009 using a network connection from a USB modem. I won’t describe everything, but I’ll say the result - the restoration failed.
4. In the case when you download the firmware yourself, see if it is exactly suitable for your specific phone model.
5. Check for iTunes. If yes, install the latest version of the program.
6. It is very advisable, and what’s more, be sure to use an original USB cable; non-certified ones can contribute to the appearance of various errors. Non-original ones are only possible, and even then not always, and they are not suitable for flashing (restoring).
7. It is quite possible that the problems are already inside, that is, “iron”. There can be a lot of faults - from the cable to the motherboard. Remember, not or too much.

As you can see, there are really a lot of options. Please pay attention to every little thing - because it is precisely because of this that problems with restoring the iPhone may arise. Something still doesn't work out? Be sure to write in the comments - we’ll try to figure it out together!

P.S. They say that in order for the recovery to be successful and correct, you need to “like” this article. They're probably lying, but I installed it just in case... and it worked! :)

Forgot your iPhone password and is locked out of your device? Many people may find themselves in this situation. In fact, this can happen due to various reasons, for example, you simply forgot the password, someone wanted to steal a glance at your iPhone and mistakenly enter the wrong password to cause your iPhone to become disabled. In such a case, the only way to fix this problem is to restore your iPhone. There are several ways to help you restore iPhone to factory settings without passcode in just a few minutes. In this post, we will guide you to factory reset iPhone XS/XR/X/8/8 Plus/7/7 Plus/6S/6S Plus/6/5 without iTunes in the most convenient way.

Top 3 Methods to Unlock iPhone/iPad

Method 1. Bypass passcode lock on iPhone via iCloud

If you are looking for a way to reset iPhone settings to factory settings without iTunes or passcode, you can use this method if you have enabled Find My iPhone feature before. The Find My iPhone feature should be able to help you destroy all the data on your device. Do it:

1. In a web browser, open the iCloud.com page, go through the authorization procedure using your Apple ID and password.

3. Click remove device. This will delete your iPhone and your forgotten password.

After doing this, you can now restore from a backup device or set up as new.

It's extremely important to note that you will need to connect your iPhone to Wi-Fi or a cellular network in order for you to be able to use the Find My iPhone service.

Method 2. How to remove password from iPhone using Tenorshare 4uKey

If you want to reset your iPhone to factory settings and remove the iPhone passcode, the article also presents one of the simplest and quick ways solutions to your problem. - this is a tool for times iPhone lock, which allows you to unlock your iPhone without a passcode. The software is also available in Russian.

Download and install the program on your PC/Mac before we begin.

Step 1. Launch the program and connect your iPhone to your computer via a USB cable.

Step 2: Once the tool recognizes your device, you can click “Get Started” to remove iPhone passcode.

Step 3: Before unlocking your iPhone passcode, download the latest iOS firmware online.

Step 4. When software downloaded to your computer, you can click "Open Now" to start restoring iPhone without passcode.

Step 5. The whole process takes a few minutes. Please keep your device connected to the system recovery process.

Step 6: When the iPhone passcode is successfully removed, you can set up your iPhone as new, including the passcode, Touch ID.

Method 3. Restore iPhone via tool, if iPhone is disabled, connect to iTunes

You have another option to restore a disabled iPhone to factory settings without iTunes using the System Restore tool - .

Now install the latest version of the program by clicking the download icon below:

Step 1: Launch the program and connect your iPhone to your computer using a cable. Click "iPhone factory reset" in the top corner to directly enter the advanced system recovery interface.

Step 2: In Advanced mode, click "Fix" to start downloading the firmware package.

Step 3: Download the appropriate firmware package by clicking the "download" button.

Step 4. Once the firmware package is downloaded, it will be completed and successful. Click "Start Restore" to restore your iPhone to factory settings.

So, this is basically what you can do to factory reset your iPhone. But just as mentioned in the Tips section, if you're afraid to do some customization on your iPhone, just don't mess it up. Lead him straight to troubleshooting experience to solve the problem with forgotten code access.

If you want too. The above methods can solve your problem.

Does an unsuccessful update threaten to delete files? It is clearly too early to despair - you should not be dictated by a manic thought to quickly take the device for repair. An extra half hour and you're done! Suddenly, once upon a time, foresight forced us to create a backup copy that would keep the data safe and sound. However, even in its absence, you can restore the functionality of your iPhone.

Restore access to iPhone via iTunes

Bad firmware and Jailbreak often disable the system. Don't be scared, as creating a backup copy of your iPhone in iTunes won't be too difficult. This procedure is necessary to avoid unpleasant consequences in the form of file loss.
The whole procedure consists of five simple steps:
1. Check for iTunes update and connect your device to your computer.
2. This will be followed by entering a password and checking the computer’s authenticity.
3. Once all the necessary data has been confirmed, a selection of device type (iPhone, iPad, iPod) will appear.
4. Saving the current activity is preceded by encryption backup copy. To do this, you need to check the box next to the “Encrypt backup copy” line and also set a password. Thus, it will be possible to preserve the “Activity” of the iPhone and protect it with additional security.

5. Upon completion of the process, you can verify the successful copying of information. You just need to look at the “Review” tab and find the “Last copy” item, where the date and time of the last save is indicated.

If the alarms are justified - the system crashed, then you should restore the saved version.

Important to know when restoring access to iPhone

If you don't have a backup of your iPhone, there are a few important things to remember:

• all user settings will be reset to factory settings, and therefore all data on the device will be lost;
• You can only restore a phone with a licensed and current firmware version.

For example, you won’t be able to restore an iPhone 4 with outdated firmware 7.0.6 via iTunes. The program will throw an error that cannot be circumvented. This version cannot be rolled back.

Recovering an iPhone via iTunes is easy

Before you think about how to restore an iPhone via iTunes, it is important to remember the basic algorithm:
1. Reset the system to factory settings;
2. Restoring from a backup (if it is missing, a clean image will be recreated).
The first step is to connect the device to a computer with free access to the Internet, from where the application can download updates. After installation is complete new version iTunes should be launched.
It is important to remember that this way you can restore any iPhone model: 4S, 5S or even 6.
When prompted to enter a password, do not be alarmed, because this procedure provides security for the owner from intruders. Following the instructions, we complete the identification process.
In the “Overview” tab, go to the first section with the “Restore iPhone” button.

In the pop-up window, the developers described all the consequences of system recovery. You must confirm your intention to return the device to factory settings.

The entire system rollback process will take from 5 to 20 minutes. After rebooting, all data and files will be deleted.

Restore iPhone without Using iTunes

Sometimes the computer is not at hand at the right time, and circumstances require you to restore your iPhone without iTunes here and now. The easiest way involves using iCloud. However, this will transfer a large amount of data, which requires a connection to a Wi-Fi network.
Creating a backup copy will greatly simplify the task, which is solved by the following algorithm:
● First of all, you need to open the settings and find the iCloud tab;
● Click on the “Storage and copies” section;

• If backup is disabled, you should enable it;
• Either a rollback will require creating a new copy;

Once the backup is created, you can safely proceed to reset to factory settings by first deleting the settings. To do this, you need to return to the main settings menu and find the “Basic” tab and the “Reset” section.

After rebooting the device, a window appears asking you to restore your iPhone using iCloud.

In this case, all data will return to its place.

Today we have to figure out how to restore an iPhone using iTunes. This kind of task is not that difficult. Especially if you carry out the process correctly. Each owner of an Apple device will be able to return certain data to their mobile device in a few minutes. This is quite normal.

Recovery methods

When thinking about restoring an iPhone, the user should take into account that there are several options for the development of events. And first you will have to make a backup copy of the information. Without this, it will not be possible to bring the idea to life.

In general, among the recovery methods via iTunes there are:

• return to factory settings;
• recovery of user data.

In fact, everything is simpler than it seems. But if a person created a copy of his data using iCloud, then iTunes will not help restore it. This is a completely normal phenomenon that is important to take into account before taking action.

About iTunes

Let's start by creating an iOS recovery document. Without it, as already mentioned, it will not be possible to achieve the task.

First of all, a person must install iTunes on his computer. It is advisable that the application version be the latest. Older builds of the program are no longer supported. Accordingly, the owner of the device will not be able to implement the task.

You can only restore licensed iOS. And the absence of a 100% backup copy of user data leads to a factory reset. And since then there is no way to get the information back. Only if there is a copy in iCloud.

Making a copy

How to restore an iPhone using iTunes? The first step, as already mentioned, is to make a copy of the data for recovery. It is worth considering that all information will be saved on the PC in the BackUp folder. And the operation is only possible if there is a connection to a computer.

To create a recovery copy, you must:

1. Download iTunes latest version to your computer and install it.
2. Connect your Apple device via USB to your PC or laptop.
3. Launch the application you are studying.
4. Wait while the devices synchronize.
5. Authenticate with AppleID. Typically, the corresponding requirement is made immediately after iTunes launches.
6. Open the "General" tab in the left menu of the program.
7. On the right side of the window, click on the “Create a copy” button.
8. Wait a few minutes.

As soon as the user completes all of the above steps, a copy with the iPhone data will appear on the computer. And now you can start restoring the OS.

To factory settings

But first, a little about that. Sometimes this operation is vital for the normal operation of an Apple smartphone. Under such circumstances it happens full reset data to factory settings. No user settings are saved.

The iTunes application really allows you to return your device to its original settings. And it's not that difficult to do. Easier than restoring user information.

The guide will look something like this:

1. Turn on your computer and launch iTunes.
2. Connect an Apple device to the PC. It is important that the connection is made using a USB cable.
3. Run the program.
4. Wait for the computer to synchronize with your mobile phone.
5. Go to the "General" tab.
6. On the right side of the window, select the “Restore iPhone” button and click on it.
7. If the system prompts, log in using AppleID.
8. Carefully study the consequences of the actions and agree with the operation.

After listed actions The iOS rollback process will begin. It usually takes from 5 to 30 minutes. Once the operation is completed, the device will reboot and recover. All data will be erased and the settings will be returned to factory settings.

Recovering data

Once iTunes has been installed and a backup has been created using it, you can restore iOS. It's pretty simple operation, which only takes a few minutes.

How to restore an iPhone using iTunes? The following instructions will help:

1. Enable iTunes.
2. Connect your smartphone via a USB cable to your computer.
3. Launch the application mentioned earlier.
4. Select the connected device in the "Devices" menu. To do this, click on the name of the device.
5. Go to the menu item "File" - "Devices".
6. Select "Restore from backup...".
7. In the field that appears, mark the line with the desired copy of the data. There may be several of them. All copies are signed with the date of their creation.
8. Confirm the operation and wait a little.

The recovery process will start operating system. After some time, iOS will be restored and the device will reboot. You cannot turn off your smartphone or work with it. Otherwise, the data will not be recovered.

Results

From now on, it’s clear how to restore an iPhone using iTunes. All of the above methods work on all Apple devices. Therefore, operations can also be carried out on tablets. There is nothing difficult or incomprehensible about this. All actions will be the same.

"iTunes" - free service, which every iPhone owner should be able to use. It helps not only create backup copies of data, but also restores device settings. In addition, this program can be useful when downloading music and photos to iPhone.

Sometimes to recover information on mobile devices use the iMazing application. This free program, which is somewhat reminiscent of iTunes. With its help, you can create a backup copy of data that is recognized by the application you are studying. But such a technique is used extremely rarely in practice. Therefore, to restore information on your phone, it is better to follow one of the instructions previously presented to your attention. How to restore an iPhone using iTunes? The task will no longer be a hassle!

If you are flashing an iPhone, remember that when you upgrade the firmware version, the modem version also upgrades. In most cases, such an increase is irreversible! There's nothing wrong with this if you don't need an unlock, but if you have a locked iPhone, you may be unable to make calls for a long time or forever. To upgrade firmware on locked iPhones, you will need to use.

This instruction is valid only for current firmware that is signed by Apple servers.
You can find out which versions of iOS are current on the pages with information on the corresponding firmware, or in ours.
For outdated versions of iOS, you should use .

1. Download the latest version of iTunes from our site and install it (if you have not already done so).
2. Download the firmware version you need from ours.
3. Connect your gadget to your computer. Press the Power (on the top) and Home (on the front panel) buttons for exactly 10 seconds, then release Power, continuing to hold Home for about 8-10 seconds. iTunes will launch and display the following message:
4. Click OK.
5. If you synchronize your gadget with iTunes, do this before flashing by clicking the "Sync" button. If you are creating a backup in iCloud, go to the "iCloud-Storage and Backups" menu in your device settings. Remember that during a restore, unlike an update, the device’s memory is completely formatted, and you can only restore content if you have a backup copy!
6. Hold down the Shift button on your keyboard, then click on the "Restore" button. Specify the path to the downloaded iOS file.
   
   
7. Wait for the firmware recovery to complete and the gadget to boot in normal mode.

How to fix error 3194 when flashing

8. Before flashing, iTunes may display error 3194. This error has several causes, but most often the culprit is a line in the hosts file that may have been left behind after you ran utilities like TinyUmbrella. If you encounter it, follow the steps below.
9. Find the Notepad shortcut (for example, in the Start menu), and select “Run as administrator” from its context menu.
   
10. In the Notepad window, go to the "File-Open" menu.
    
    
11. Go to the folder "C:\Windows\System32\Drivers\etc". At the bottom, in the drop-down list, select "All files", then you will see the hosts file. Open the file.
    
    
12. Browse the contents of the hosts file. If you see a line that contains "gs.apple.com", you need to delete it entirely.
    
    
13. Close Notepad. When prompted to save the file, answer in the affirmative. Then reboot..
14. Try flashing again, there is a good chance that error 3194 will no longer appear.

How to fix errors 1013, 1014 or 1015 when flashing

15. In addition, when downgrading the firmware on an iPhone or iPad with a cellular modem, iTunes will most likely throw an error in the range of 1013-1015 in the middle of the firmware. This is due to the inability to downgrade the modem. To boot your device normally after such an error, follow the instructions below.
16. Download the latest version of redsn0w for Windows.
17. Unzip the archive and place redsn0w on your desktop.
18. In the context menu of the redsn0w.exe file, select pu