Lewis light machine gun (USA - UK). History of weapons: Lewis machine gun Lewis machine gun from World War I

American Isaac Lewis developed his light machine gun around 1910, based on an earlier machine gun design by Dr. Samuel McLean. The machine gun was proposed by the designer for weapons American army, but the response was a harsh refusal (caused by an old personal conflict between the inventor and General Crozier, then head of the US Army Weapons Department). As a result, Lewis sent his steps to Europe, to Belgium, where in 1912 he founded the company Armes Automatiques Lewis SA to sell his brainchild. Since the company did not have its own production facilities, an order for the production of the first experimental batch of Lewis machine guns was placed with the English company Birmingham Small Arms (BSA) in 1913. Shortly before the outbreak of the First World War, Lewis machine guns were adopted by the Belgian army, and after the start of the war they began to enter service with the British army and royal air force. In addition, these machine guns were widely exported, including to Tsarist Russia. In the USA, the production of Lewis machine guns caliber .30-06 in the interests of mainly the nascent air force and Marine Corps was deployed by Savage Arms. In the twenties and thirties, Lewis machine guns were quite widely used in aviation. various countries, while the barrel casing and radiator were usually removed from them. During the Second World War, a significant number of British Lewis were withdrawn from reserves and used to arm territorial defense units and for air defense of small commercial transport ships.

Manual Lewis machine gun uses gas-operated automatics with a long-stroke gas piston located under the barrel. The barrel is locked by turning the bolt onto four lugs located radially at the rear of the bolt. Shooting is carried out from an open bolt, with automatic fire only. Features of the machine gun include a spiral return spring acting on the gas piston rod through a gear and gear train, as well as an aluminum radiator on the barrel, enclosed in a thin-walled metal casing. The radiator casing protrudes forward in front of the muzzle, so that when firing, an air draft is formed through the casing along the radiator, from the breech of the barrel to the muzzle. The cartridges were fed from disk magazines attached to the top with a multi-layer (in 2 or 4 rows, capacity 47 and 97 rounds, respectively) cartridges arranged radially, with bullets to the axis of the disk. At the same time, the magazine did not have a feed spring - its rotation to feed the next cartridge to the chambering line was carried out using a special lever located on the machine gun and driven by the bolt. In the infantry version, the machine gun was equipped with a wooden butt and a removable bipod; sometimes a handle for carrying the weapon was placed on the barrel casing. Japanese Type 92 Lewis machine guns (produced under license) could additionally be used from special tripod machines.

The Lewis light machine gun, created in 1913, became a real symbol of the First World War. During the war, it was not only the main machine gun of the British Commonwealth countries, but was also widely used throughout the world, including taking part in the Russian Civil War. The machine gun was withdrawn from service in the 1930s, but with the outbreak of World War II, after partial modernization, the “old man” had to be returned to service. In our country this machine gun familiar even to those who have never been particularly interested in firearms and theirs. He became a real hero not only of world cinema, but also of domestic cinema. In particular, in the beloved movie “ White sun desert" with a Lewis machine gun you can see the Red Army soldier Sukhov.

To be fair, it should be noted that not only the real Lewis machine gun was filmed in the famous Soviet Eastern film. In the shooting scenes it was replaced with a Soviet DP (Degtyarev infantry) light machine gun. For filming, the machine gun was specially “made up” to look like a “Lewis” using a characteristic barrel casing and a finned disc lining. Most likely, during filming the real Lewis was simply faulty or there were no blank cartridges available for it. At the same time, the Lewis machine gun appeared in many Soviet/Russian films about the Civil War.

The Lewis machine gun, or simply "Lewis" is a British light machine gun that was created in 1913. It is worth noting that the idea of ​​​​designing a machine gun belonged to Samuel McLean, but it was brought to life by an American, Colonel Isaac Lewis. Initially, he wanted to use this machine gun as a machine gun with water cooling, but during development he abandoned this idea in favor of creating a light machine gun with forced air cooling of the barrel.

The creator of the famous machine gun, American Army Colonel Isaac N. Lewis, was a leading weapons expert in the US Army. He received his education at the famous West Point Military Academy, from which he successfully graduated in 1884. In 1911, Lewis became commander of the artillery school located at Fort Monroe. Here he achieved fame as a very good specialist in electrical and mechanical engineering. As his retirement from the military approached, the colonel began working as a consultant for the Ohio-based Automatic Arms Company.

For a number of years, Isaac was developing his own light machine gun, the automation of which would operate using the energy of powder gases. At this time, the AAC company acquired the rights to a machine gun created by Dr. Samuel McLean. Lewis used technical solutions McLean when creating his own machine gun. For the right to produce this weapon, the AAS company transferred to him a controlling stake and control over the production and distribution of the machine gun. Two years later, in 1913, the Lewis machine gun with a disc magazine and air-cooled barrel was finally ready.

Initially, Lewis wanted to offer his product to the American army, but received a strict refusal, which was caused by a long-standing personal conflict between the designer and General Crozier, who was at that time the head of the US Army Armament Department. As a result, the first country to adopt the Lewis light machine gun was Belgium, this happened already in 1913. At the same time, just before the war, the British also liked the machine gun; production was launched in England at BSA factories. By the end of 1915, the new production workshops located in Birmingham were operating at full capacity, with production of Lewis machine guns reaching 300 units per week.

The machine gun's combat debut occurred in the First World War and turned out to be very successful. Due to maneuverability and overall stealth of this weapon The soldiers of the Kaiser's Germany nicknamed the Lewis machine gun the "rattlesnake". The characteristic sound of a fired machine-gun burst also contributed to this nickname. At the same time, the Germans themselves actively used captured Lewis machine guns, converting them to the 7.92 Mauser cartridge and actively using them in assault troops along with other trophies obtained in battles.

The automatic machine gun operated on the principle of removing powder gases. When firing, gases passed through a hole in the barrel and pressed on the piston. The piston, moving back, turned the spiral gear with a rack (the same as in a watch) return spring, turning her on this way. Structurally, the light machine gun consisted of the following main parts and mechanisms: a barrel with a casing and a radiator, receiver with a feed mechanism and a cover, a butt plate with a butt, a bolt, a bolt frame, a fire control handle, a recoil spring with a box, a magazine and a bipod.

« Business card The Lewis-designed light machine gun had a casing whose edges extended far beyond the muzzle and created a kind of ejector there with its profile - when firing, a wave of powder gases passing through it, with its inertia, contributed to the creation of a vacuum in the rear part of the casing. As a result, a portion of cold air was drawn under the casing along the longitudinally finned barrel of the machine gun. At that time, active air cooling was not used anywhere else in small arms.

In the front part of the casing there was a gas chamber regulator, which had two holes for removing gases from letter designations: “S” is the smaller hole and “L” is the larger hole. In order to move the regulator from one hole to another, it had to be rotated 180 degrees using the regulator lever. The machine gun barrel was locked by turning the bolt, the lugs of which fit into the transverse grooves of the receiver. The rotation of the bolt of a light machine gun when locking is carried out by a curved groove on the bolt and the base of the bolt frame post.

The machine gun used a striker-type impact mechanism, which was mounted on the bolt frame rack. The trigger mechanism of the weapon allows only automatic fire from it. Extraction of the cartridge case (cartridge) was carried out by two ejectors fixed in the bolt, and reflection was carried out by a lever-type reflector, which was located in the receiver. The light machine gun had a fuse, which consisted of two slats with cutouts at both ends. Rails were placed on the left and right sides of the receiver. The cutouts were designed to secure the bolt carrier in the forward and rear positions. In order to put bolt carrier on the safety, the bar (left or right, depending on which side the charging handle was located) had to be moved up.

The machine gun barrel and receiver had a threaded connection. The barrel is air cooled. The cooling of the light machine gun barrel was enhanced due to the presence of a radiator and a casing with a pipe. For ease of shooting, the light machine gun was equipped with a bipod. Sights were presented with a frame diopter sight and a triangular front sight. In the case of using a machine gun as a light easel, it was attached to the swinging part of the machine, while the butt plate with the butt of the machine gun was replaced with a butt plate with a handle.

The machine gun was fed with cartridges using disk magazines for 47 and 97 rounds attached to it on top, which were multi-layered (in two or three rows, respectively). The cartridges in the store were located radially to the axis of the disk. At the same time, the magazines in the Lewis light machine gun did not have a feed spring - their rotation to feed the next cartridge to the ramming line took place using a specially provided lever, which was located on the machine gun and driven by the bolt. The disk magazine was kept from turning to the left or right using two levers that were placed on the receiver cover. In the infantry version, the Lewis was equipped with a removable bipod and a wooden butt. Sometimes a special handle could be installed on the barrel casing, designed for carrying a light machine gun.

The design of the infantry version of the Lewis machine gun remained unchanged for almost the entire First World War. However, the military conflict required the use of a machine gun in aviation. The aviation version of the machine gun already had its differences. It turned out that the massive “pipe” of the radiator casing prevented the air gunner from taking aim, since due to the large windage, the machine gun was subjected to very strong air flow pressure. It also turned out that due to air flow during flight, the machine gun barrel is less susceptible to overheating than on the ground, so the unnecessary casing on the aircraft machine gun was abandoned, although the radiator itself remained in place.

It was also found that spent cartridges that flew overboard could lead to damage to the fabric covering of the aircraft, and also to the propeller for rear-engined aircraft. Therefore, combat units independently began equipping machine guns with special boxes or bags for collecting cartridges. After receiving official complaints from pilots, BSA began producing cartridge case collection bags for turret versions of its machine guns with a capacity of 94 cartridge cases. However, the capacity was not enough for intense air combat, and the capacity of the bags was increased to 330 cartridges.

Reliability of the Lewis design light machine gun in any, even the most unfavorable conditions ensured the weapon's reputation as one of the best light machine guns of the First World War, although the weight of the weapon caused certain difficulties for the shooters. The machine gun was only withdrawn from service in the UK in the late 1930s. However, defeats in the first battles of World War II, when a large number of weapons of the English Expeditionary Force were left in France, as well as the need for short time to deploy a massive army and equip the territorial defense troops with something, they returned the machine gun to service. To the army, which experienced a shortage of automatic small arms, approximately 59 thousand Lewis system light machine guns were returned from warehouses. At the same time, all machine guns underwent minor modernization, in particular, aluminum radiators were removed from them, a flash suppressor appeared on the muzzle, and the heavy two-legged bipod was replaced with a single-legged telescopic one.

Military parade on Red Square. Moscow, November 7, 1941. The photo is especially interesting because the Red Army soldiers are dressed in winter helmets, which were canceled in July 1940, and are also armed with old English machine guns Lewis systems

The Lewis machine gun was widely used in our country. Back in 1913, the Russian army showed interest in this development, purchasing an experimental batch. But these machine guns appeared en masse in Russian Empire Only in 1917, in 1916, an agreement was signed for the purchase of 9,600 American-made machine guns and 1,800 British-made machine guns. After Russia’s withdrawal from the First World War, these machine guns were widely used in the years Civil War. For example, Nestor Makhno’s personal guards were armed with Lewis system light machine guns.

In the Red Army, Lewis machine guns remained in service until the mid-1920s, remaining in military warehouses until the beginning of the Great War. Patriotic War. It is also curious that Estonian Kalev-class submarines of British production were armed with Lewis machine guns. These boats, along with machine guns, became part of the Baltic Fleet. Already by the autumn-winter of 1941, the Red Army was faced with the same problem as the British - there was a shortage of automatic small arms for the newly formed units. The existing Lewis light machine guns were returned from warehouses, including those used by militia units defending the approaches to Moscow and Leningrad.

This light machine gun was also used by the Axis countries during the Second World War. Since the end of 1944, the Germans have been arming Volkssturm battalions with them, transferring 2891 Lewis M1920 machine guns from the arsenals of occupied Holland into their arsenal. In Japan, Type 92 Lewis machine guns (they were produced in this country under license) were used until the end of World War II, while in Japanese army they could additionally be used from special tripod machines.

Tactical and technical characteristics of the Lewis machine gun:
Weight - 13 kg.
Length - 1280 mm.
Barrel length - 670 mm.
Cartridges - 7.7x56 mm (.303 British), 7.62x63 mm (.30-06 Springfield), 7.62x54 mm R.
Rate of fire - 550 rounds/min.
The initial bullet speed is 740 m/s.
Effective fire distance - 800 m.
Magazines - disk for 47 or 97 rounds.

Information sources:
http://www.airwar.ru/weapon/guns/lewis.html
http://www.megasword.ru/index.php?pg=550
http://world.guns.ru/machine/usa/lewis-r.html
http://gunmagazine.com.ua/index.php?id=313
Open source materials

The Lewis Machine Gun is a famous British light machine gun that played a role in both global wars. This is one of the most famous examples of weapons of the last century. The Lewis machine gun managed to take part in both the Russian Revolution and the Civil War. "Lewis" can safely be called the most successful machine gun of its period.

The Lewis machine gun had an unusual design and was truly the highest combat properties, which allowed the machine gun to remain in service for so long. Distinctive feature Lewis machine gun is the shape of the barrel casing, by which one can unmistakably identify this weapon.

Creation Story

The Lewis light machine gun was developed by Samuel McClane in the USA in 1911. The modification of this weapon was carried out by American Army Colonel Isaac Newton Lewis. At first, he wanted to make this machine gun a machine gun and equip it with water cooling, but then he stopped at the unique idea of ​​forced air cooling of the barrel. It must be emphasized that no one after Lewis used a similar design in the design of the gun.

Lewis offered his own machine gun for arming the American army, several samples of the gun even passed tests, but military administration The United States considered this machine gun unpromising and not worthy of attention. After this disaster, Lewis retired and moved overseas, first to Belgium and then to England. It was the Belgians who were the first to become interested in the new machine gun and adopted it for service in 1913. The production of the Lewis light machine gun was launched at the factories of the BSA company (Great Britain).

In 1914, the machine gun received its baptism of fire - the global war. After its launch, demand for the Lewis machine gun grew at an unusual rate, BSA expanded production, but despite this, it could not fill all orders. Therefore, some of the orders were located in the USA.

custom_block(1, 46672070, 5524);

German infantrymen called the Lewis machine gun a “rattlesnake” for the corresponding sound of its operation and took it as a trophy with pleasure. Then the Lewis guns were redesigned for the Mauser cartridge and used in battle with success. The German assault troops were especially fond of the Lewis machine gun.

This machine gun came to Russia back in 1913: several samples were purchased for testing at the Officer Rifle School. But the Russian military did not like the Lewis; in particular, there were many complaints about the short service life of the machine gun barrel.

But they didn’t forget about this machine gun in Russia; they became especially necessary during the war. In 1915, the British government ceded to Russia the rights to all Lewis cars made under British orders in the USA. Deliveries began next year. Lewis machine guns made in Great Britain and chambered for the British cartridge 303 were also supplied to Russia. South American machine guns were chambered for the 7.62 mm Mosin cartridge.

Lewis light machine guns were used extensively by Russian aviation. An additional handle, a sleeve collector and a flame arrester were installed on it. From time to time the casings were removed: the incoming air flow cooled the barrel quite well.

Before the start of the revolutionary events, more than 10 thousand units of this weapon were delivered to Russia, which is why they were intensively used during the Civil War. For example, the personal guard of the famous Old Man Makhno was armed with “Lewis”.

"Lewis" was stored in quite large quantities in Russian military warehouses. After the start of the war, they were remembered and sent to the front. There is a famous photo of Red Army soldiers armed with these machine guns, marching at the famous parade on November 7, 1941.

The British had a similar situation. At the end of the 30s, the British army began to replace the Lewis with the more modern Bren. During the flight from France, an unlimited number of small arms were lost, so the Lewis had to return to service. The Germans also used these machine guns, which they occupied as trophies. In the main, Volkssturm units were armed with it.

The last huge conflict for this machine gun was the Korean War.

Custom_block(5, 75444309, 5524);

custom_block(1, 47628358, 5524);

The design of a machine gun and the principle of its operation

The operation of the automatic machine gun is based on the removal of part of the powder gases from the barrel bore. The rate of operation of the automation (rate of fire) is regulated by a tap on the gas chamber. The gas piston moved backward, wound the spiral spring (as in an ordinary watch) and turned the magazine through a special mechanism. The barrel bore was locked by rotating the bolt, the stops of which fit into the grooves of the receiver. The trigger mechanism allowed only automatic fire.

The Lewis machine gun consisted of the following components: barrel with casing and radiator, receiver, bolt and bolt carrier, magazine of special design, trigger mechanism and with a handle, a return spring.

The coil spring is also a unique feature of this machine gun: it has never been used in a weapon since. To tighten the spring, a small special key was included in the set of the machine gun.

The spring unwinds and feeds the cartridge into the chamber, after which the shot is fired.

The main feature of the Lewis machine gun was its casing, which greatly protruded beyond the dimensions of the gun barrel. When fired, the powder gases made the area low blood pressure at the rear of the casing, which pulled cool air through it to cool the ribbed barrel. Folding bipods were attached to the casing.

The magazine design of this machine gun is also more interesting. It had a disk shape, the cartridges were placed in several rows: two or four. Unlike most existing magazines, it did not contain a feed spring. The cartridges were fed using special mechanism, which was operated by a protrusion on the bolt. A similar store can be considered as one of the first attempts to abandon belt feeding.

The fuse was installed on the receiver.

40 seven rounds were fired in just 6 seconds, so machine gunners were taught to release their finger from the trigger on the count of “three.” Sights consisted of a rear sight and a front sight located at the end of the casing. The rear sight had two positions: at 600 yards (approximately 500 meters) and a second one designed for shooting at longer distances. Anti-aircraft "Lewis" were equipped with special sights made of wire.

The Belgians, who were the first to adopt this machine gun, called the Lewis “a machine gun you can run with.” And it really was like that. Despite its impressive dimensions, the machine gun weighed only twelve kg, which was very little. Most of samples of similar weapons from that time were water-cooled, equipped with machine tools and weighed more than 30 kg. It is clear that such a machine gun could hardly be used in offensive operations.

Tactical and technical properties

Video about the machine gun

Hero of the Four Rams
Russian ace Boris Kovzan destroyed four of the 28 planes he shot down with rams.
How one ax fighter defeated 50 Germans
On July 13, 1941, Red Army soldier Dmitry Ovcharenko, armed with one ax, defeated an enemy platoon, killing 23 Germans.
How another descendant of Ilya Muromets killed a German platoon with shafts
1On September 8, 1943, Lieutenant Konstantin Gushchin killed 37 Germans with shafts.
Escape of Vladimir Muratov
On August 8, 1944, pilot Vladimir Muratov escaped from captivity on an enemy plane, taking with him another captured pilot Ivan Klevtsov and switched to ours...
The American army has lost combat effectiveness due to obesity of soldiers
The main threat to the army's combat effectiveness is Big Mac.
How a descendant of Ilya Muromets burned two Tigers with bottles
On July 13, 1944, Guard Sergeant Vladimir Gushchin, a 28th generation descendant of Ilya Muromets, burned two German tanks. Pz.VI Molotov cocktails.

311 Germans in one battle
311 Germans in one battle. On October 12, 1943, machine gunner Vyacheslav Chemodurov destroyed 311 Wehrmacht soldiers in the battle near Propoisk.

How sniper Ilya Kaplunov knocked out 9 enemy tanks
On December 20, 1942, in a battle near the Nizhne-Kumsky farm, Ilya Kaplunov knocked out 9 enemy tanks. Latest tanks he destroyed with a torn off arm and a torn off leg.

The feat of Lieutenant Gudz
How a battalion consisting of one tank stopped the German attack on Moscow.
Pavlov's House
How 31 people defended the building for 49 days, withstanding the onslaught of an entire regiment.
The lies of the Ukrainian media
Ukrainian media accused the militias of shelling Lugansk from Grady...

The feat of Konovalov's crew
On July 13, 1942, our tank crews destroyed 16 enemy tanks on a faulty KV, and, left without a tank, returned to their own in a captured armored vehicle.

How Sergeant Panfilenok knocked out 17 German tanks with a forty-five
On June 25, 1941, a battery of our forty-fives knocked out 42 enemy tanks. 23 of these tanks were hit by one gun, and 17 of them by one man.

V-1
On June 13, 1944, the first aircraft was fired into London.

Losses of German tanks during the war
How many tanks did the Germans lose every month?

On December 5, 1941, a counteroffensive of Soviet troops began near Moscow.

How Mikhail Devyatayev escaped from captivity by hijacking a German plane
On February 8, 1945, a group of Soviet prisoners of war escaped from a German concentration camp on a German bomber they had captured.

Brusilovsky breakthrough
On June 4 (new style), 1916, the famous offensive of the Southwestern Front began.

The militia shot the marauding cops
And in Slavyansk, two militiamen were shot for the same thing...

Danube landing
On June 24, 1941, our troops landed on Romanian territory.

Tu-126
The first Soviet AWACS aircraft.

How a Leningrad chemist destroyed the German air fleet
The professor's discovery made it possible to prevent mass raids on Leningrad.

Riding on the wing
How our pilots carried their downed comrades out of the German rear on the wings of their planes.

I-153 in battles for the Motherland
I-153 is the best biplane fighter...

The feat of senior lieutenant Shevtsov
How a tank company of Lieutenant Shevtsov took Maloarkhangelsk and held the station until the main forces arrived...

How a resourceful foreman blew up a German ship
Petty Officer Mitrokhin crawled up to the side on a sleigh and planted explosives. The sleigh and the foreman were dragged back on a winch.

Feat of a telephone operator
On March 3, 1944, telephone operator Olga Efimenko knocked out german tank and killed a dozen Krauts.

Equipment and weapons 2003 02 Magazine “Equipment and weapons”

Lewis light machine gun

Lewis light machine gun

The machine gun was developed in the USA by Samuel McClen with the active participation of Lieutenant Colonel O.M. Lissack. The developers sold the patent rights to the new weapon to the Automatic Arms Company formed in Buffalo. The latter turned to Colonel Isaac N. Lewis with a request to bring the system to a state in which it would suit potential customers. In 1911, Lewis presented the machine gun to the US Army Chief of Staff and the Secretariat of War Affairs. Four copies were purchased for testing (characteristically, the first test took place at the military aviation school in Maryland), but the Ordnance Directorate did not find the weapon interesting for the army. Lewis went to Belgium, where he was able to put the machine gun into production.

In 1913, the Lewis machine gun was adopted by the Belgian army (it was also the first to use it in battle during its retreat in 1914). Then he became interested in Russian specialists. At the beginning of July, the Belgian Society of Automatic Weapons sent a sample of a machine gun from St. Petersburg. Tests carried out at the Officer Rifle School revealed that the system was incomplete. The main complaints were caused by the cooling of the barrel, which did not allow firing more than 500–600 shots. Nevertheless, the GAU submitted to the Military Council a proposal to purchase for testing in 1914 10 McClane-Lewis, 2 Berthier (Berthier-Pasha) and 3 Hotchkiss (for airplanes) submachine guns. On July 25, 1913, the Military Council approved this purchase. With the outbreak of the war, the funds allocated for “Hotchkiss” and “Berthier” were used “to strengthen the funds of the war fund,” but interest in “Lewis” apparently remained. After testing 10 Lewis guns at the Officer Rifle School, the Head of the GAU ordered their transfer to the Officer Cavalry School. The latter refused, and the machine guns were transferred “to the Korpus airfield.” Positive feedback The head of the GAU inspired the company to offer on August 8 - after the start of the war - the supply of 5,000 lightweight submachine guns with 56-round magazines. But then they did not issue new orders.

When the need for such weapons became obvious, we had to wait until the end of 1915 for supplies.

With the outbreak of war in 1914, the British Army adopted the machine gun. At first, the Birmingham Small Arms (BSA) company received the contract, but although the Lewis was produced 6 times faster than the Vickers easel and cost about 5 times less, it could not produce the new weapon on the required scale. Therefore, the contract was transferred to the American Savage Arms Company. And only with the beginning of sustainable production were they able to “cede” part of the contract to Russia.

The machine gun had an automatic gas exhaust engine with removal of powder gases through a transverse hole at the bottom of the barrel and a long stroke of the piston rod, locking the barrel bore by turning the bolt. Characteristics there was a snail-shaped (spiral) recoil spring, a relatively large-capacity disk magazine without a feeder spring, and a barrel air cooling system.

The cooling system had an original siphon circuit. An aluminum radiator with high longitudinal ribs, covered with a cylindrical casing, was placed on the barrel. At the front, the casing narrowed and extended beyond the muzzle of the barrel. When fired, the powder gases formed a vacuum in the muzzle, as a result of which air from the breech was intensively blown through the radiator.

Gas chamber - closed type, with a cylinder. A gas regulator with two holes of different diameters was screwed into it from below, alternately positioned opposite the transverse outlet of the chamber. The regulator was turned using the lower key. The piston rod had sealing bands, and the piston itself had a cup-shaped recess. The front and rear parts of the rod (bolt frame) were rigidly connected with pins, and on the rear part there was a toothed rack, cocking and rack. The reloading handle was inserted into the rod on the right or left. The return spring was placed in a special box at the bottom and rotated a gear coupled with the piston rack. This decision left free place in the receiver, protected the spring from heating, but overall it was unnecessarily complicated.

Four lugs were located in the rear part of the bolt frame, and two spring ejectors were mounted in the front. The bolt was rotated by a gas piston strut, sliding in a screw groove in the frame. The drummer was rigidly mounted on the same stand. The non-rotating tail of the bolt, inserted into the frame at the rear, carried guide lugs and an upper protrusion for driving the feeder. The trigger mechanism allowed only continuous fire and was assembled in a trigger box, attached to the receiver with a protrusion and a latch. A shot from the rear sear facilitated intense fire without the danger of self-ignition of the cartridge in the heated chamber. When he pressed the trigger, he turned the trigger lever, the sear of the lever came out from under the cocking of the piston rod. The fuse was a bar that blocked the slot in the receiver and locked the reloading handle. The stroke length of the moving system is 163 mm.

The bolt, moving backwards, was removed from the chamber spent cartridge case and turned the lever reflector in the left wall of the receiver. The reflector head protruded from the wall, entered the groove of the bolt frame and pushed the sleeve to the right with an impact.

The original power system was a definite attempt to abandon the tape, but retain the drive of the feeding mechanism from the movable automation system and completely synchronize the operation of the mechanisms. The disk magazine included a cup divided by wall projections and rods into 25 sectors, in which cartridges were placed along a radius in two rows. In the center of the disk there was a bushing with a screw groove and a central hole. The feed mechanism mounted in the receiver consisted of a feeder, a pawl with a spring, two stops and a tongue with a guide plate and its spring. The equipped magazine was placed with the central hole (arrow forward) onto the receiver glass. The first cartridge was opposite the tongue plate and stop. When the bolt moved backward, the protrusion of its tail slid along the curved groove of the feeder, turning it to the left. The feed dog turned the magazine cup, and the left limiter did not allow it to turn more than one step. The tongue plate pressed the cartridge into the receiving window of the box. When moving forward, the bolt picked up this cartridge, and the feeder turned to the right, its pawl jumped over the next protrusion of the magazine cup, the magazine spike pressed the left limiter. The right stop prevented the cup from rotating to the right. Since the magazine sleeve remained motionless, the cartridges, sliding the bullet noses along its screw groove, dropped down, so that with each turn a new cartridge was placed under the tongue plate.

A folding frame sight with a diopter rear sight and a set screw was mounted on the receiver cover, and a triangular front sight was mounted on the connecting ring of the casing, which, in general, did not contribute to shooting accuracy. The length of the aiming line is 818 mm. In total, the design of the machine gun included 88 parts.

Longitudinal section of a Lewis machine gun

Lewis Mk 1 machine gun with lightweight bipod. Sight raised

The bipod for the machine gun was a rigid triangular one with a fork and a connecting rod with a clamp, but the casing could be attached with a fork forward or backward - in the first case, stability was increased, in the second, the firing sector required less space up to and at the edge of the trench. Lightweight bipods were hinged to the connecting ring of the casing.

The tripod machine for the Lewis - it was supplied to Russia in small quantities - had one rear and two front legs with shoes and openers. The legs were hinged to the frame, which made it possible to change the height of the line of fire. The machine gun was attached to the swivel bar with a clamp; for rough vertical aiming, a mechanism with an arc was used, for fine vertical aiming, a screw mechanism was used, which changed the relative position of the arc and the bar. The tripod, of course, gave better accuracy, but still did not make the machine gun “universal.”

“Lewis” was developed in the USA and the bulk of these machine guns for Russia were produced there, but in our country, thanks to the ordering procedure and the cartridge, it was always considered “English”. The Russian Army was also armed with a 37-mm McClen automatic cannon, the main task of which, by the way, was to fight enemy machine guns.

In Great Britain, the Lewis model 1915 with a 47-round magazine received the designation Mk 1 in October 1916; after the war, it was changed to the 1923 model. The old Lewis remained in the countries British Commonwealth, and in other calibers it was supplied to other countries (Estonia, Japan). In December 1916, "Savage" received an order for "Lewis" chambered for .30-06 "Springfield" from the US Army, which was preparing to enter the war on the side of the Entente. True, in the US Army the Lewis was used mainly as an aircraft machine gun. By 1917, Savage had brought total production"Lewis" up to 400 machine guns per week.

Although the Lewis was very heavy - almost half the mass of the mounted Vickers - of all the light machine guns of the First World War, it turned out to be the most “long-serving”. In Russia in the mid-1920s. he was the only one still listed service weapon rifle units. Last time These machine guns showed their worth at the beginning of the Great Patriotic War, when they were issued from warehouses to new formations and militias. However, the old “Lewis” fought in other armies at that time. Their last “big war” was the Korean War, but even then they surfaced in different parts Sveta.

Along with the most successful light machine gun of its time, the Lewis gained no less fame as an aviation one. On October 11, 1915, Assistant Minister of War General Belyaev wrote: “I would consider it urgently necessary ... to order 1000 machine guns from the Lewis company for installation on airplanes.” That is, Lewis was initially purchased by Russia for aviation. On July 14, 1916, General Hermonius reported: “50 Lewis aircraft machine guns were sent July 10–23 to the Marine General Staff marked "Aviation". In Great Britain, the aviation modification Lewis Mk 2 was adopted in November 1915 - a month after the land Mk 1 (although in air battles"Lewis" has been used since 1914). It was distinguished by a second control handle in place of the butt, a 97-round magazine, and a sleeve collection bag, but parts of the machine guns were shortened with a casing and radiator, a flame arrester was installed, and in 1918 the radiator was completely removed - the oncoming air flow sufficiently cooled the barrel in flight. In May 1918, machine guns began to be converted into Mk 2 with an enlarged gas outlet and changes in automatic parts to increase the rate of fire. Such a machine gun, but produced anew, was designated Mk 3. When aircraft Lewis began to be used on the ground during World War II, it turned out that a massive radiator was not really needed for a light machine gun.

The procedure for unloading the Lewis light machine gun:

Turn on the fuse (on the left above trigger guard), lowering it down. Release the magazine by pressing its latch (inside the magazine opening). Remove the cartridge from the receiving window of the receiver (from under the feed lever). Turn off the safety by lifting it up and smoothly release the bolt carrier from cocking by pressing the trigger.

The procedure for partial disassembly of the Lewis light machine gun:

1. Unload the machine gun.

2. Separate the butt plate from the butt, to do this: press the latch (bottom behind the pistol grip) and turn the butt to the left 1/8 turn.

3. Separate the trigger box; to do this: press the trigger and push the box back.

4. Separate the box with the gear and return spring.

5. Separate the receiver cover by sliding it back.

6. Remove the feed lever from the cover by: moving the feed lever latch forward; turn it to the right so that the cutout is against the protrusion on the glass.

7. Remove the bolt frame with the bolt from the receiver, to do this: pull the charging handle back and remove it from the frame to the side; remove the bolt with bolt frame.

8. Separate the bolt from the bolt frame.

Assembly should be carried out in reverse order. Make sure that: when attaching the feed lever, the protrusion of the bolt tail falls into the curved groove of the feed lever; The return spring must be partially twisted (pressed) before attaching the box.

Lewis model

Cartridge.303 "British" (7.71x56)

Weight of weapon without cartridge and bipod, kg 10.63

Weight of loaded magazine, kg 1.8

Weapon length, mm 1280

Barrel length/mm 660

Right-hand rifling 4

Initial bullet speed, m/s 747

Sighting range, m 1850

Rate of fire 500-600

Combat rate of fire, rds/min 150

Magazine capacity, 47 rounds

Height of the firing line on the bipod, mm 408

Machine type tripod

Machine weight, kg 11.5

Vert angles machine gun aiming, hail on the machine from -62 to +42

Horizontal angle machine gun aiming, hail on the machine 360

French peasants greet American soldiers. On the shoulder of one of the soldiers is a Shosha light machine gun.

Type 74 light machine gun The Chinese adopted the Soviet system of unification of small arms based on the machine gun. Based on the Chinese-made Type 56 assault rifle (a copy of the AK), the Type 74 light machine gun was created. Accordingly, the automatic machine gun operates by retracting