Samurai swords. Japanese weapons and their types. Japanese samurai warrior sword Long samurai sword 6 letters crossword clue

The reign of the Tokugawa shogunate from 1603 was associated with the disappearance of the art of wielding a spear. The bloody wars were replaced by the era of technology and the improvement of military competition with swords. The art associated with it was called “kenjutsu”, over time it turned into a means of spiritual self-improvement.

The meaning of the samurai sword

Real samurai swords were considered not just the weapons of a professional warrior, but also a symbol of the samurai class, an emblem of honor and valor, courage and masculinity. Since ancient times, weapons have been revered as a sacred gift from the Sun Goddess to her grandson, who rules the earth. The sword was to be used only to eradicate evil, injustice and protect good. He was part of the Shinto cult. Temples and sacred places were decorated with weapons. In the 8th century, Japanese clergy participated in the production, cleaning, and polishing of swords.

The samurai had to always keep a warrior's kit with him. Swords were given a place of honor in the house, a niche in the main corner - tokonoma. They were stored on a tachikake or katanakake stand. When going to bed, the samurai put his swords at arm's length at his head.

A person could be poor, but have an expensive blade in an excellent frame. The sword was an emblem emphasizing class status. For the sake of the blade, the samurai had the right to sacrifice own life and your family.

Japanese warrior kit

Japanese warriors always carried two swords with them, which indicated that they were samurai. The warrior's set (daise) consisted of a long and short blade. The long samurai sword katana or daito (60 to 90 cm) is the main weapon of the samurai since the 14th century. It was worn on the belt with the point up. The sword was sharpened on one side and also had a hilt. The combat masters knew how to kill with lightning speed, in a split second by extending the blade and making one swing. This technique was called “iaijutsu”.

A short samurai wakizashi sword (shoto or kodachi), half as long (from 30 to 60 cm), was worn on the belt with the tip up, and was used less often when fighting in cramped conditions. With the help of wakizashi, warriors cut off the heads of killed opponents or, when captured, committed seppuku - suicide. Most often, samurai fought with a katana, although special schools taught fighting with two swords.

Types of samurai swords

In addition to the daisho set, there were several types used by warriors.

• Tsurugi, chokuto - ancient sword, used until the 11th century, had straight edges and was sharpened on both sides.
• Ken is a straight ancient blade, sharpened on both sides, used in religious rites and rarely used in battle.
• Tati is a large curved sword (point length from 61 cm), used by horsemen, worn with the tip down.
• Nodachi or odachi - an extra-large blade (from 1 m to 1.8 m), which is a type of tachi, was worn behind the rider's back.
• Tanto - dagger (up to 30 cm long).
• Bamboo swords (shinai) and wooden swords (bokken) were used for training. The training weapon could be used in combat with an unworthy opponent, such as a robber.

Commoners and men of the lower classes had the right to defend themselves with small knives and daggers, since there was a law on the right to carry swords.

Katana sword

Katana is a samurai fighting sword, included in the standard weapon of a warrior along with a small wakizashi blade. It began to be used in the 15th century thanks to the improvement of tati. The katana has an outwardly curved blade and a long, straight handle that allows it to be held with one or two hands. The blade has a slight bend and a pointed end, used for cutting and piercing blows. The weight of the sword is 1 - 1.5 kg. In terms of strength, flexibility and hardness, the samurai katana sword ranks first among other blades in the world; it cuts through bones, rifle barrels and iron, and is superior to Arab damask steel and European swords.

The blacksmith who forged weapons never made accessories; for this purpose he had other craftsmen subordinate to him. A katana is a construction set assembled as a result of the work of a whole team. Samurai always had several sets of accessories worn on occasion. The blade was passed down from generation to generation for centuries, and its appearance could change depending on the circumstances.

History of the katana

In 710, the legendary first Japanese swordsman Amakuni used a sword with a curved blade in battle. Forged from dissimilar plates, it had a saber shape. Its form did not change until the 19th century. Since the 12th century, katanas have been considered the swords of aristocrats. Under the reign of the Ashikaga shoguns, a tradition arose of wearing two swords, which became the privilege of the samurai class. A set of samurai swords was part of military, civilian and festive costume. All samurai, regardless of rank, wore two blades: from private to shogun. After the revolution, Japanese officials were required to wear European swords, and then katanas lost their high status.

Secrets of making a katana

The blade was forged from two types of steel: the core was made from tough steel, and the cutting edge was made from durable steel. The steel was cleaned by repeated folding and welding before forging.

In the manufacture of a katana, the choice of metal, special iron ore with impurities of molybdenum and tungsten. The master buried the iron rods in the swamp for 8 years. During this time, the rust ate away the weak points, then the product was sent to the forge. The gunsmith turned the rods into foil with a heavy hammer. The foil was then folded and flattened repeatedly. Therefore, the finished blade consisted of 50,000 layers of high-strength metal.

Real samurai katanas have always been distinguished by a characteristic hamon line, which appears as a result of the use of special forging and hardening methods. The handle of the tsuka sword was wrapped in stingray skin and wrapped in a strip of silk. Souvenir or ceremonial katanas could have handles made of wood or ivory.

Katana Proficiency

The long hilt of the sword allows it to be maneuvered effectively. To hold the katana, use a grip, the end of the handle of which must be held in the middle of the left palm, and with the right hand, squeeze the handle near the guard. The synchronized swing of both hands made it possible for the warrior to achieve a wide amplitude of the swing without spending a lot of effort. The blows were delivered vertically to the enemy's sword or arms. This allows you to move your opponent's weapon out of the attack's path so you can hit him with the next swing.

Ancient Japanese weapons

Several varieties of Japanese weapons are of the auxiliary or secondary type.

• Yumi or o-yumi - combat bows (from 180 to 220 cm), which are oldest weapon Japan. Bows have been used in combat and in religious ceremonies since ancient times. In the 16th century they were supplanted by muskets brought from Portugal.
• Yari - a spear (5 m long), a weapon popular in the era of civil strife, was used by infantry to throw the enemy off a horse.
• Bo is a military fighting pole, nowadays classified as a sporting weapon. There are many options for the pole, depending on the length (from 30 cm to 3 m), thickness and cross-section (round, hexagonal, etc.).
• Yoroi-doshi was considered a dagger of mercy, resembled a stiletto and was used to finish off opponents wounded in battle.
• Kozuka or kotsuka is a military knife mounted in the sheath of a combat sword, often used for household purposes.
• Tessen or dansen uchiwa - a commander's battle fan. The fan was equipped with sharpened steel spokes and could be used in an attack, as a battle hatchet and as a shield.
• Jitte - an iron war club, a fork with two teeth. Used during the Tokugawa era as a police weapon. Using jitte, police intercepted samurai swords in battles with violent warriors.
• Naginata is a Japanese halberd, a weapon of warrior monks, a two-meter long pole with a small flat blade at the end. In ancient times, it was used by foot soldiers to attack enemy horses. In the 17th century it began to be used in samurai families as a feminine
• Kaiken is a combat dagger for aristocratic women. Used for self-defense, and also by dishonored girls for suicide.

During the period of internecine civil wars in Japan, firearms, flintlock (teppo) guns, which became considered unworthy with the rise of the Tokugawa. Since the 16th century, cannons also appeared in Japanese troops, but the bow and sword continued to occupy the main place in the samurai’s weapons.

Katana-kaji

Swords in Japan have always been made by people of the ruling class, often relatives of the samurai or courtiers. With the growing demand for swords, feudal lords began to patronize blacksmiths (katana-kaji). Making a samurai sword required careful preparation. The forging of swords resembled a liturgical ceremony and was filled with religious activities to protect the owner from evil forces.

Before starting work, the blacksmith observed a fast, abstained from bad thoughts and actions, and performed a ritual of cleansing the body. The forge was carefully cleaned and decorated with shime - ritual attributes woven from rice straw. Each forge had an altar for prayer and for moral preparation for work. If necessary, the master put on a kuge - formal clothes. Honor did not allow an experienced craftsman to make low-quality weapons. Sometimes a blacksmith would destroy a sword he might have spent several years crafting because of a single flaw. Work on one sword could last from 1 year to 15 years.

Japanese sword production technology

The melted metal obtained from magnetic iron ore was used as weapon steel. Samurai swords, considered the best in the world Far East, were as durable as Damascus. In the 17th century, metal from Europe began to be used in the production of Japanese swords.

The Japanese blacksmith shaped the blade from a huge number of iron layers, thin strips with different carbon content. The strips were welded together during melting and forging. Forging, stretching, repeated folding and new forging of metal strips made it possible to obtain a thin beam.

Thus, the blade consisted of many fused thin layers of different carbon steel. The combination of low-carbon and high-carbon metals gave the sword special hardness and toughness. At the next stage, the blacksmith polished the blade on several stones and hardened it. It is not uncommon for samurai swords from Japan to take several years to complete.

Murder at a Crossroads

The quality of the blade and the skill of the samurai were usually tested in battle. Nice sword allowed to cut three corpses laid on top of each other. It was believed that new samurai swords should be tested on humans. Tsuji-giri (killing at the crossroads) is the name of the ritual of testing a new sword. The victims of the samurai were beggars, peasants, travelers and just passers-by, whose number soon numbered in the thousands. The authorities posted patrols and guards on the streets, but the guards did not perform their duties well.

Samurai, who did not want to kill innocents, preferred another method - tameshi-giri. By paying the executioner, one could give him the blade that he used during the execution of the condemned man.

What is the secret of the sharpness of the katana?

A real katana sword can sharpen itself as a result of the ordered movement of molecules. Simply by placing the blade on a special stand, the warrior would again receive a sharp blade after a certain period of time. The sword was polished in stages, through ten reducing grits. Then the master polished the blade with charcoal dust.

At the last stage, the sword was hardened in liquid clay; as a result of this procedure, a matte, thin strip (yakiba) appeared on the blade. Famous masters they left a signature on the tail of the blade. After forging and hardening, the sword was polished for half a month. When the katana had a mirror shine, the work was considered completed.

Conclusion

A real samurai sword, the price of which is fabulous, is usually handmade ancient master. Such tools are difficult to find, as they are passed down in families as heirlooms. The most expensive katana have mei - the mark of the master and the year of manufacture on the shank. Many swords were decorated with symbolic forging, drawings that ward off evil spirits. The sword sheath was also decorated with ornaments.

Samurai sword

Japanese technology for making iron swords began to develop with 8th century and reached the highest perfection XIII century, allowing you to produce more than just combat weapon, but a real work of art that cannot be reproduced in full even in modern times. For about a thousand years, the shape of the sword remained virtually unchanged, changing slightly mainly in length and degree of bending in accordance with the development of close combat tactics. The sword, being one of the three ancient regalia Japanese Emperor, also had ritual and magical significance in Japanese society.

Terminology

Japanese names are often used in literature to refer to varieties of Japanese swords and their parts. A brief dictionary of the most commonly used concepts:

Comparison table of Japanese swords

History of the Japanese sword

Ancient swords. Until the 9th century.

The first iron swords were brought to Japanese islands in the 2nd half 3rd century Chinese traders from the mainland. This period of Japanese history is called Kofun(lit. " mounds », III- centuries). IN graves kurgan-type swords of that period have been preserved, although badly damaged by rust, divided archaeologists to Japanese, Korean and the most common Chinese samples. Chinese swords had a straight, narrow, single-edged blade with a large ring-shaped pommel on the tang. Japanese examples were shorter, with a wider, straight, double-edged blade and a massive pommel. IN Asuka period( - gg.) with the help of Korean and Chinese blacksmiths in Japan began to produce their own iron, and to 7th century mastered composite technology. Unlike previous samples, forged from a solid iron strip, swords began to be made by forging from iron and steel plates

In the old days (the period of Koto swords, around 2000), there were approximately 120 blacksmith schools, which over the centuries produced swords with characteristic stable features developed by the founding master of the school. In modern times (the period of Shinto swords - gg.) 80 schools are known. There are about 1000 outstanding masters of the blacksmith's craft, and in total, over a thousand years of the history of the Japanese sword, more than 23 thousand swordsmiths have been recorded, of which the largest number (4 thousand) lived in the period of koto (old swords). Bizen Province(modern prefecture Okayama).

Iron ingots were flattened into thin sheets, cooled rapidly in water, and then broken into coin-sized pieces. After this, a selection of pieces was carried out, pieces with large inclusions of slag were discarded, and the rest were sorted by color and granular structure of the fault. This method allowed the smith to select steel with a predictable carbon content ranging from 0.6 to 1.5%.

Further release of slag residues in the steel and reduction of carbon content was carried out during the forging process - joining individual small pieces into a blank for the sword.

Blade forging

Cross section of a Japanese sword. Shown are two common structures with excellent combinations in the direction of the steel layers. Left: The metal of the blade will show texture. itame, on right - masame.

Pieces of steel with approximately the same carbon content were poured onto a plate of the same metal, in a single block everything was heated to 1300°C and welded together with hammer blows. The process of forging the workpiece begins. The workpiece is flattened and folded in half, then flattened again and folded in half in the other direction. As a result of repeated forging, multilayer steel is obtained, finally cleared of slag. It is easy to calculate that when folding a workpiece 15 times, almost 33 thousand layers of steel are formed - typical density Damascus for Japanese swords.

The slag still remains a microscopic layer on the surface of the steel layer, forming a kind of texture (hada), resembling a pattern on the surface of wood.

To make a sword blank, a blacksmith forges at least two bars from hard high carbon steel (kawagane) and softer low-carbon ( shingane). From the first, a U-shaped profile approximately 30 cm long is formed, into which a block is placed shingane, without reaching the part that will become the top and which is made of the best and hardest steel kawagane. Then the blacksmith heats the block in a forge and welds the component parts together by forging, after which he increases the length of the workpiece at 700-1100°C to the size of a sword.

With more complex technology, up to 4 bars are welded: from the hardest steel ( hagane) form the cutting blade and apex, 2 bars of less hard steel go to the sides, and a bar of relatively soft steel forms the core. The composite structure of the blade can be even more complex with a separate welding of the butt.

The blade of the blade is formed by forging to a thickness of about 2.5 mm (in the area cutting edge) and its faces. The upper tip is also straightened by forging, for which the end of the workpiece is cut diagonally. Then the long end (on the blade side) of the diagonal cut is forged to the short one (the butt), as a result of which the structure of the metal at the top provides increased strength in the striking zone of the sword, while maintaining hardness and thereby the possibility of very sharp sharpening.

Blade hardening and polishing

The next important stage in sword manufacturing is heat treatment of the blade to strengthen the cutting edge, as a result of which a pattern appears on the surface of the sword jamon, specific specifically for Japanese swords. Up to half of the blanks in the hands of the average blacksmith never become real swords as a result of failed hardening.

For heat treatment, the blade is covered with an uneven layer of heat-resistant paste - a mixture of clay, ash and stone powder. The exact composition of the paste was kept secret by the master. The blade was covered with a thin layer, the thickest layer of paste was applied to the middle part of the blade, where hardening was undesirable. The liquid mixture was leveled and, after drying, scratched in a certain order in the area closer to the blade, thanks to which a pattern was prepared jamon. The blade with the dried paste is heated evenly along its length until approx. 770°C (controlled by the color of the hot metal), then immersed in a container of water with the blade down. Sudden cooling changes the structure of the metal near the blade, where the thickness of the metal and heat-protective paste is thinnest. The blade is then reheated to 160°C and cooled again. This procedure helps reduce stress in the metal caused by hardening.

The hardened area of ​​the blade has an almost white tint compared to the rest of the blade's darker gray-bluish surface. The border between them is clearly visible in the form of a patterned line jamon, which is interspersed with shiny crystals martensite into iron. In ancient times, the hamon looked like a straight line along the blade; during the Kamakura period, the line became wavy, with fancy curls and transverse lines. It is believed that in addition to its aesthetic appearance, the wavy, heterogeneous line of the hamon allows the blade to better withstand impact loads, damping sudden stresses in the metal.

If the procedure is followed, as an indicator of the quality of hardening, the butt of the blade acquires a whitish tint, utsuri(lit. reflection). Utsuri reminds jamon, but its appearance is not a consequence of the formation of martensite, but an optical effect resulting from a slight change in the structure of the metal in this zone compared to the nearby body of the blade. Utsuri is not a mandatory attribute of a quality sword, but indicates successful heat treatment for certain technologies.

When the blade is heated during the hardening process to a temperature of more than 770°, its surface acquires a richness of shades and a richness of pattern details. However, this may damage the durability of the sword. Only the blacksmiths of the Sagami province during the Kamakura period managed to combine the fighting qualities of a sword with the luxurious design of the metal surface; high-quality swords of other schools are distinguished by a rather strict manner of design of the blade.

The final finishing of the sword is no longer carried out by a blacksmith, but by an artisan polisher, whose skill was also highly valued. Using a series of polishing stones of varying grits and water, the polisher would polish the blade to perfection, after which the smith would stamp his name and other information onto the unpolished tang. The sword was considered ready, the remaining operations were to attach the handle ( tsuki), guards ( tsuba), applying jewelry was classified as an auxiliary procedure that did not require magical skill.

Fighting qualities

The combat quality of the best Japanese swords cannot be assessed. Due to their uniqueness and high price, testers are not able to test and compare them with best works gunsmiths from other regions of the world. It is necessary to distinguish between the capabilities of the sword for different situations. For example, sharpening a sword for maximum sharpness (for tricks with cutting handkerchiefs in the air) will be unsuitable for cutting through armor. In ancient times and the Middle Ages, legends were spread about the capabilities of weapons that could not be demonstrated in modern times. Below are some legends and facts about the capabilities of the Japanese sword.

Modern assessment of Japanese swords

After Japanese surrender in World War II countries anti-Hitler coalition issued an order to destroy all Japanese swords, but after the intervention of experts, in order to preserve historical relics of significant artistic value, the order was changed. The Society for the Preservation of Artistic Japanese Swords (NBTHK) was created, one of its tasks was expert review historical value of the sword. IN 1950 In Japan, the Law “On Cultural Heritage” was issued, which, in particular, determined the procedure for preserving Japanese swords as part of the cultural heritage of the nation.

The sword evaluation system is multi-stage, starting with the assignment of the lowest category and ending with the awarding of the highest titles (the top two titles are under the purview of the Japanese Ministry of Culture):

• National Treasure ( kokuho). About 122 swords have the title, mostly tachi from the Kamakura period, katana and wakizashi in this list are less than 2 dozen.
• Important cultural property. About 880 swords have the title.
• A particularly important sword.
• An important sword.
• A particularly guarded sword.
• Guarded sword.

In modern Japan, it is possible to keep a registered sword with only one of the above titles, otherwise the sword is subject to confiscation as a type of weapon (unless it is classified as a souvenir). The actual quality of the sword is certified by the Society for the Preservation of the Japanese Sword (NTHK), which issues an expert opinion according to the established standard.

Currently in Japan, it is customary to evaluate a Japanese sword not so much by its combat parameters (strength, cutting ability), but by criteria applicable to a work of art. A high-quality sword, while maintaining the properties of an effective weapon, should provide aesthetic pleasure to the observer, have perfection of form and harmony of artistic taste.

Sources

The article was written based on materials from the following publications:

• Sword. Kodansha encyclopedia of Japan. 1st ed. 1983. ISBN 0-87011-620-7 (U.S.)
• A. G. Bazhenov, “History of the Japanese sword”, St. Petersburg, 2001, 264 pp. ISBN 5-901555-01-5
• A. G. Bazhenov, “Examination of the Japanese sword,” St. Petersburg, 2003, 440 p. ISBN 5-901555-14-7.
• Leon and Hiroko Kapp, Yoshindo Yoshihara, “The Craft of the Japanese Sword.” Translation into Russian on the website www.katori.ru.

Notes

1. The term “tati” has been established in Russian-language literature. Russian phonetics does not allow you to accurately convey the sound; English phonetics reproduces the name as tachi.
2. There is no exact deflection standard for tati. At the beginning, Tati's sword had an almost saber-like curvature, to XIV century the blade straightens. The sori deflection is standardly measured as the maximum distance from the butt to the straight line between the tip of the sword and the base of the blade. The handle is not taken into account in the calculation of curvature.
3. Definitions of the types of Japanese swords are given in A. Bazhenov’s book “Examination of the Japanese Sword” according to the explanation of the Japanese association NBTHK (Society for the Preservation of Artistic Japanese Swords), responsible for the certification of Japanese blades.
4. Although the tachi is on average longer than the katana, it is not uncommon for the length of the katana to exceed the length of the tachi.
5. These lengths are obtained by converting the traditional Japanese length measure shaku(30.3 cm, approx. elbow length) in cm.
6. That is, until the end of the period Momoyama. Traditionally, Japanese history is divided into unequal periods, determined by the names of the settlements that became the habitat of the emperor.
7. Aoi Art Tokyo: Japanese auction house specializing in Japanese swords.
   Japanese Sword Ginza Choshuya Magazine: A store selling Japanese swords, publishes a catalog every month.
8. The Kogarasu-Maru sword is made in the unusual kissaki-moroha style, popular in Nara period. Half of the blade is double-edged to the tip, the other half has a blunt edge. There is a central groove running along the blade; the blade itself is very slightly curved, but there is a rather strong bend in the shank in relation to the blade. There is no signature on the sword. Kept in the collection of the imperial family. See photo in Bazhenov’s book “History of the Japanese Sword”.
9. "Lumbar curve" ( koshi-zori) so named because the maximum deflection of the blade when carrying the sword fit comfortably body just in the lumbar region.
10. The butt can be flat or semicircular, but such examples are extremely rare among real Japanese swords.
11. A. G. Bazhenov, “History of the Japanese sword”, p. 41
12. A. G. Bazhenov, “History of the Japanese sword”, p. 147
13. Sword. Kodansha encyclopedia of Japan.
14. A. Bazhenov, “Examination of the Japanese sword”, pp. 307-308
15. A brilliant clear color of the fracture indicates a carbon content greater than 1% (high carbon steel).
16. The process of forging a sword is described according to the booklet of the All-Japan Association of Swordsmiths and the book “The Craft of the Japanese Sword” (see sources), which describes the restored modern master ancient technology.

Japanese sword - single-edged blade slashing weapon, produced using traditional Japanese technology from multilayer steel with controlled carbon content. The name is also used to designate a single-edged sword with the characteristic shape of a slightly curved blade that was the main weapon of the samurai warrior.
Let's try to understand a little about the variety of Japanese swords.
Traditionally, Japanese blades are made of refined steel. The process of their manufacture is unique and is due to the use of iron sand, which is purified under high temperatures to obtain iron with a higher high performance cleanliness. Steel is extracted from iron sand.
The bend of the sword (sori), performed in different variants, is not accidental: it was formed in the process of centuries-old evolution of weapons of this type (simultaneously with changes in samurai equipment) and was constantly varied until the perfect form was eventually found, representing continuation of a slightly curved arm. The bending is partly due to the peculiarities of heat treatment: with differential hardening, the cutting part of the sword stretches more than the back.
Just like the Western blacksmiths of the Middle Ages, who used zone hardening, Japanese craftsmen do not harden blades evenly, but in a differentiated manner. Often the blade starts out straight and receives its characteristic curve as a result of hardening, giving the blade a hardness of 60 Rockwell, but the back of the sword only 40.

Give-sho

Daisho (Japanese 大小, daisho:, lit. “big-small”) - a pair of samurai swords, consisting of a shoto (short sword) and a daito (long sword). The length of the daito is more than 66 cm, the length of the shoto is 33-66 cm. The daito served as the main weapon of the samurai, the shoto as an additional weapon.
Until the early Muromachi period, the weapon was a tachi - a long sword worn on a belt with the blade down. However, starting from the end of the 14th century, it was increasingly replaced by the katana. It was worn in a sheath secured to the belt with a ribbon of silk or other fabric (sageo). A tanto dagger was usually worn along with a tachi, and a wakizashi dagger paired with a katana.
Thus, daito and shoto are classes of swords, but not the name of a specific weapon. This circumstance caused the incorrect use of these terms. For example, in European and domestic literature, only a long sword (daito) is mistakenly called a katana. Daisho was used exclusively by the samurai class. This law was religiously observed and repeatedly confirmed by decrees of military leaders and shoguns. Daisho was the most important component of a samurai’s costume, his class identification. The warriors treated their weapons accordingly - they carefully monitored their condition and kept them near them even during sleep. Other classes could only wear wakizashi or tanto. Samurai etiquette required taking off a long sword when entering a house (as a rule, it was left with a servant or on a special stand); samurai always carried a short sword with them and used it as a personal weapon.

Katana

Katana (Japanese 刀) is a long Japanese sword. In modern Japanese, the word katana also means any sword. Katana is the Japanese reading (kun'yomi) of the Chinese character 刀; Sino-Japanese reading (on'yomi) - then:. The word means "a curved sword with a single-sided blade."
Katana and wakizashi are always worn in a sheath, tucked into the belt (obi) at an angle that hides the length of the blade from the enemy. This is an accepted way of wearing in society, formed after the end of the wars of the Sengoku period in early XVII century, when carrying weapons became more of a tradition than military necessity. When the samurai entered the house, he took out a katana from his belt. In case of possible conflicts, he held the sword in his left hand in a state of combat readiness or, as a sign of trust, in his right. When sitting down, he placed the katana on the floor within reach, and the wakizashi was not removed (the samurai wore it in a sheath in his belt). Mounting the sword for outdoor use is called koshirae and includes the lacquered sheath of the sai. If there was no frequent need to use the sword, it was stored at home in a shirasai mount made of untreated magnolia wood, which protected the steel from corrosion. Some modern katanas are initially produced in this version, in which the scabbard is not varnished or decorated. Such installation, in which there was no tsuba and other decorative elements, did not attract attention and became widespread in late XIX centuries after the imperial ban on wearing a sword. It seemed that the sheath was not a katana, but a bokuto - a wooden sword.

Wakizashi

Wakizashi (Japanese: 脇差) is a short traditional Japanese sword. Mainly used by samurai and worn on the belt. It was worn in tandem with a katana, also tucked into the belt with the blade facing up. Blade length - from 30 to 61 cm. Total length with handle 50-80 cm. Single-sided blade, slight curvature. The wakizashi is similar in shape to a katana. Wakizashi was made with zukuri various shapes and length, usually thinner than that of a katana. The degree of convexity of the wakizashi blade's cross-section is much less, so compared to the katana, this sword cuts soft objects more sharply. The handle of a wakizashi is usually square.
The Bushi often called this sword "the guardian of their honor." Some fencing schools taught the use of both katana and wakizashi at the same time.
Unlike the katana, which could only be worn by samurai, wakizashi was allowed to merchants and artisans. They used this sword as a full-fledged weapon, because according to their status they did not have the right to carry a katana. Also used for the ritual of seppuku.

Tati

Tachi (Japanese: 太刀) is a long Japanese sword. The tachi, unlike the katana, was not tucked into the obi (fabric belt) with the blade up, but hung on the belt in a sling intended for this purpose, with the blade down. To protect against damage from armor, the scabbard was often wrapped. Samurai wore katana as part of civilian clothing, and tachi as part of military armor. Paired with tachi, tantos were more common than the wakizashi short sword related to katana. In addition, richly decorated tati were used as ceremonial weapons in the courts of shoguns (princes) and the emperor.
It is usually longer and more curved than the katana (most had a blade length of over 2.5 shaku, that is, more than 75 cm; the tsuka (hilt) was also often longer and somewhat curved).
Another name for this sword is daito (Japanese 大刀, lit. “big sword”) - in Western sources it is sometimes mistakenly read as “daikatana”. The error occurs due to ignorance of the difference between on and kun reading of characters in Japanese; The kun reading of the character 刀 is “katana”, and the on reading is “to:”.

Tanto

Tanto (Japanese 短刀 tanto:, lit. “short sword”) is a samurai dagger.
“Tan to” for the Japanese sounds like a phrase, so they do not perceive tanto as a knife (knife in Japanese is hamono (Japanese 刃物 hamono)).
The tanto was used only as a weapon and never as a knife; for this purpose there was a kozuka, worn in tandem with the tanto in the same sheath.
Tanto has a single-edged, sometimes double-edged blade ranging from 15 to 30.3 cm in length (that is, less than one shaku).
It is believed that tanto, wakizashi and katana are, in fact, “the same sword of different sizes.”
Some tantos, which had a thick triangular blade, were called yoroidoshi and were designed to pierce armor in close combat. Tanto was used mostly by samurai, but it was also worn by doctors and merchants as a weapon of self-defense - in fact, it is a dagger. Women high society Sometimes they also wore small tantos, called kaiken, in the belt of the kimono (obi) for self-defense. In addition, tanto is used in the wedding ceremony of royal persons to this day.
Sometimes the tanto was worn as a shoto instead of a wakizashi in a daisho.

Odachi

Odachi (Japanese 大太刀, “big sword”) is one of the types of long Japanese swords. The term nodachi (野太刀, "field sword") refers to another type of sword, but is often mistakenly used instead of odachi.
To be called an odachi, a sword must have a blade length of at least 3 shaku (90.9 cm), however, as with many other Japanese sword terms, there is no exact definition of the length of an odachi. Usually odachi are swords with blades 1.6 - 1.8 meters.
Odachi fell completely out of use as a weapon after the Osaka-Natsuno-Jin War of 1615 (a battle between Tokugawa Ieyasu and Toyotomi Hideyori - the son of Toyotomi Hideyoshi).
The Bakufu government issued a law according to which it was forbidden to have a sword of more than a certain length. After the law went into effect, many odachi were trimmed to conform to the regulations. This is one of the reasons why odachi are so rare.
Odachi were no longer used for their intended purpose, but were still a valuable gift during the Shinto (“new swords”) period. This became their main purpose. Because their manufacture required the utmost skill, it was recognized that the reverence inspired by their appearance corresponded to prayer to the gods.

Nodachi

Sephiroth with the nodachi sword "Masamune"

Nodachi (野太刀 "field sword") is a Japanese term referring to a large Japanese sword. The main reason that the use of such swords was not widespread was that the blade was much more difficult to forge than a regular length sword blade. This sword was worn on the back due to its large size. This was an exception because other Japanese swords such as the katana and wakizashi were worn tucked into the belt, while the tachi was hung with the blade down. However, the nodachi was not snatched from behind the back. Due to its great length and weight, it was a very complex weapon.
One of Nodati's assignments was to fight horsemen. It was often used in conjunction with a spear because with its long blade it was ideal for striking an opponent and his horse in one fell swoop. Due to its weight, it could not be used everywhere with ease and was usually discarded when close combat began. The sword could hit several enemy soldiers with one blow. After using nodachi, samurai used a shorter and more convenient katana for close combat.

Kodati

Kodachi (小太刀) - literally translated as "small tachi", is a Japanese sword that was too short to be considered a daito (long sword) and too long to be a dagger. Due to its size, it could be grabbed very quickly and also used for fencing. It could be used where movement was restricted or when attacking shoulder to shoulder. Since this sword was shorter than 2 shaku (about 60 cm), it was allowed to be worn by non-samurai, usually merchants, during the Edo period.
The kodachi is similar in length to the wakizashi, and although their blades differ significantly in design, the kodachi and wakizashi are so similar in technique that the terms are sometimes (incorrectly) used one instead of the other. The main difference between both is that the kodachi is (usually) wider than the wakizashi. In addition, the kodachi, unlike the wakizashi, was always worn in a special sling with the curve down (like a tachi), while the wakizashi was worn tucked behind the obi with the curve of the blade upward. Unlike other types of Japanese weapons, no other sword was usually carried along with the kodachi.

Kaiken

Kaiken (Japanese 懐剣, before the spelling reform kwaiken, also futokoro-gatana) is a dagger carried by men and women of the samurai class in Japan, a type of tanto. Kaikens were used for indoor self-defense, where long katanas and medium-length wakizashi were less convenient and effective than short daggers. Women wore them in an obi for self-defense or (rarely) for suicide (jigaya). They could also be carried in a brocade bag with a drawstring that allowed the dagger to be quickly retrieved. Kaiken was one of the wedding gifts for women. Currently, it is one of the accessories of the traditional Japanese marriage ceremony: the bride takes the kaiken to ensure good luck.

Kusungobu, yoroidoshi, metezashi.

Kusungobu (Japanese nine sun five bu) is a straight thin dagger with a blade 29.7 cm long. In practice, yoroidoshi, metezashi and kusungobu are one and the same.

Naginata

Naginata (なぎなた, 長刀 or 薙刀, literal translation - “long sword”) is a Japanese edged weapon with a long oval-shaped handle (namely a handle, not a shaft, as it might seem at first glance) and a curved one-sided blade. The handle is about 2 meters long and the blade is about 30 cm. Over the course of history, a shortened (1.2-1.5 m) and lighter version has become much more common, used in training and showing greater combat effectiveness. It is an analogue of a glaive (although it is often mistakenly called a halberd), but much lighter. The first information about the use of naginata dates back to the end of the 7th century. There were 425 schools in Japan where they studied naginatajutsu fighting techniques. It was the favorite weapon of the Sohei, warrior monks.

Bisento

Bisento (Japanese: 眉尖刀 bisento) is a Japanese bladed weapon with a long handle, a rare type of naginata.
Bisento differs from naginata in its larger size and different style of handling. These weapons must be used with a wide grip, using both ends, while the leading hand should be near the guard.
There are also advantages to the bisento fighting style over the naginata fighting style. In combat, the back of the bisento blade, unlike a katana, can not only repel and deflect a blow, but also apply pressure and control. The Bisento is heavier than the katana, so its slashes are more forward than fixed. They are applied on a much larger scale. Despite this, the bisento can easily cut off the head of both a person and a horse, which is not so easy to do with a naginata. The weight of the sword plays a role in both the piercing and pushing properties.
It is believed that the Japanese took the idea of ​​this weapon from Chinese swords.

Nagamaki

Nagamaki (Japanese 長巻 - “long wrapper”) is a Japanese edged weapon consisting of a polearm with a large tip. It was popular in the XII-XIV centuries. It was similar to an owl, naginata or gleyvia, but differed in that the lengths of the handle and tip were approximately equal, which allows it to be classified as a sword.
Nagamaki are weapons manufactured on various scales. Usually the total length was 180-210 cm, the tip - up to 90-120 cm. The blade was only on one side. The handle of the nagamaki was wrapped with cords in a crossed manner, similar to the handle of a katana.
This weapon was used during the Kamakura period (1192-1333), Namboku-cho (1334-1392) and during the Muromachi period (1392-1573) and reached its greatest prevalence. It was also used by Oda Nobunaga.

Tsurugi

Tsurugi (Japanese 剣) is a Japanese word meaning a straight, double-edged sword (sometimes with a massive pommel). Its shape is similar to a tsurugi-no-tachi (straight one-sided sword).
It was used as a combat sword in the 7th-9th centuries, before the advent of one-sided curved tati swords, and subsequently for ceremonial and religious purposes.
One of the three sacred relics of Shintoism is the sword Kusanagi-no-tsurugi.

Chokuto

Chokuto (Japanese: 直刀 chokuto, “straight sword”) is common name an ancient type of swords that appeared among Japanese warriors around the 2nd-4th centuries AD. It is not known for sure whether chokuto originated in Japan or was exported from China; It is believed that in Japan blades were copied from foreign samples. At first, swords were cast from bronze, but later they began to be forged from a single piece of low-quality (there was no other kind at that time) steel using rather primitive technology. Like Western analogues, chokuto was intended primarily for stabbing strikes.
The characteristic features of the chokuto were a straight blade and one-sided sharpening. The most common were two types of chokuto: kazuchi-no-tsurugi (sword with a hammer-shaped head) had a hilt with an oval guard ending in an onion-shaped copper head, and koma-no-tsurugi ("Korean sword") had a hilt with a head in ring shape. The length of the swords was 0.6-1.2 m, but most often it was 0.9 m. The sword was worn in a scabbard covered with sheet copper and decorated with perforated patterns.

Shin-gunto

Shin-gunto (1934) is a Japanese army sword created to revive samurai traditions and raise the morale of the army. This weapon repeated the shape of the Tati combat sword, both in design (similar to the Tachi, the shin gunto was worn on a sword belt with the blade down and its design used a kabuto-gane handle cap, instead of the kashiro adopted on katanas), and in the techniques of handling it. Unlike tachi and katana swords, which were made individually by blacksmiths using traditional technology, shin-gunto was mass-produced in a factory manner.
Shin-gunto was very popular and went through several modifications. IN last years During the Second World War, they were mainly associated with the desire to reduce production costs. Thus, the hilts of swords for junior army ranks were made without braiding, and sometimes even from stamped aluminum.
For naval ranks, in 1937, their own military service was introduced - kai-gunto. It was a variation on the sin-gunto theme, but differed in design - the braid of the handle was brown, the handle had black stingray leather, the scabbard was always wooden (for the sin-gunto it was metal) with black trim.
After the end of World War II, most of the Shin Gunto were destroyed by order of the occupation authorities.
Ninjato, Shinobigatana (fictional)
Ninjato (Japanese: 忍者刀 ninjato:), also known as ninjaken (Japanese: 忍者刀) or shinobigatana (Japanese: 忍刀), is a sword used by ninjas. It is a short sword forged with much less effort than a katana or tachi. Modern ninjato often have a straight blade and a square tsuba (guard). Some sources claim that the ninjato, unlike the katana or wakizashi, was used to deliver only cutting blows, not piercing ones. This statement may be erroneous, since the main enemy of the ninja was the samurai, and his armor required an accurate stabbing blow. However, the main function of the katana was also a powerful cutting blow.

Shikomizue

Shikomizue (Japanese: 仕込み杖 Shikomizue) - a weapon for “hidden war”. In Japan it was used by ninjas. Nowadays, this blade often appears in films.
The Shikomizue was a wooden or bamboo cane with a hidden blade. The shikomizue blade could be straight or slightly curved, because the cane had to exactly follow all the curves of the blade. The Shikomizue could be either a long sword or a short dagger. Therefore, the length of the cane depended on the length of the weapon.

Zanbato, zambato, zhanmadao

The Japanese reading of the zhanmadao characters is zambato (Japanese: 斬馬刀 zambato:) (also zammato), but it is unknown whether such weapons were actually used in Japan. However, zambato is mentioned in some contemporary Japanese works of popular culture.
Zhanmadao or mazhandao (Chinese: 斬馬刀, pinyin zhǎn mǎ dāo, literally “sword for cutting horses”) is a Chinese two-handed saber with a wide and long blade, used by foot soldiers against cavalry during the Song Dynasty (mention of mazhandao is present, in particular, in the "Biography of Yue Fei" dynastic history "Song Shi"). The tactics of using mazhangao, according to the Song Shi, are attributed to the famous military leader Yue Fei. Infantry detachments armed with mazhangao, operating before the formation of the main part of the troops in a scattered formation, tried to use it to cut off the legs of enemy horses. Similar tactics were used in the 1650s by the troops of Zheng Chenggong in battles with the Qing cavalry. Some foreign researchers claim that the mazhangao saber was also used by the Mongol army of Genghis Khan.

It seems we have never seen such a device here,” Hopkins squinted as the A6M Reisen fighter landed at the airfield.
- Like? - Vasya asked.
“It’s good... In its own way,” the American admitted.
The unfamiliar pilot was already approaching his friends. Short, with a polite smile on his dark face with narrow slanted eyes. It was difficult to determine his age: he could be forty or twenty years old.
The pilot bowed politely.
“Captain Hirata Ishiro,” he introduced himself.
The friends looked at each other. Vasya awkwardly asked:
- Which of these is the first name and which is the last name?
Yeah. Vasya knows how to blurt out so much that everyone is embarrassed. But the Japanese remained unperturbed and answered just as politely:
- Last name first. Name later. It seems like this is the case with Russians too.
“Sometimes,” Vasya muttered.
- Welcome! - Hopkins decided to slightly improve the awkward situation.
But Vasya, with his indomitable friendliness, ruined everything again. He tried to speak to the Japanese in his native language.
- Harakiri! Kamikaze! - Vasya declared with a broad welcoming gesture.
A smile froze on the Japanese man's face.
He bowed again, showing that he appreciated the desire of his new acquaintances to please him, and replied:
- Not necessarily a kamikaze. A6M Reisen - fighter. Very good. Best. Excellent maneuverability, high flight range. - And he explained: - “Mitsubishi A6M Reizen” is an abbreviation for “Reishiki Zentoki” - “Fighter Zero”, or “Fighter Zero”, as you say.
Captain Hirata showed the take-off with his palm, then circled and showed the landing.
- Best on Pacific Ocean, continued the Japanese. - From Pearl Harbor to last fights, when we repelled the American B-29 raids on Japan, the Reisen took part in all air battles. The most popular aircraft - more than ten thousand of them were produced in Japan during the war.
“Well, in the end, “Reisen” was blown away,” Hopkins noted.
“In the first battles in the Pacific Ocean, they couldn’t resist him for six months,” retorted Captain Hirata.
“That’s true, but then things got worse,” Hopkins insisted. - The war continued, and the Japanese continued to fly Reizens. By the end of the forty-second year, the A6M began to lag behind its opponents, and after the forty-third, it became clear to a hedgehog, as the Russians say, that it was outdated. And still they continued to release it. This is how airplanes become symbols, not fighting machines...
Hirata shrugged.
- There is no point in denying the obvious. But... - He looked back at his plane with some almost childish love. - Just look at him. It's like a samurai sword.
...Work on the development of a marine experimental carrier-based fighter began in 1937 at Mitsubishi under the leadership of the company's chief engineer Jiro Horikoshi. What was required? Maneuverability, speed - up to five hundred kilometers per hour at an altitude of four kilometers. Plus the flight range is up to eight hours. Naturally, with such a range, excellent radio equipment is necessary. Two cannons, two machine guns.
“Look, the Japanese’s mouth will start watering,” Vasya whispered in Hopkins’ ear.
Even if the Japanese heard this remark, he didn’t show it. He continued enthusiastically:
- On April 1, 1939, the fighter was taken into the air by test pilot Katsuzo Shima. After flight tests, it was decided to replace the two-bladed variable-pitch propeller with a three-blade automatic propeller. Everything else is perfect, like Hattori Hanzo’s blade!
“Maybe not so ideal,” Hopkins said suddenly. - If I’m not mistaken, Mitsubishi received instructions to install a more powerful Nakajima NK1C Sakae-12 engine on the third prototype aircraft.
Captain Hirata bowed to the American.
“I’m pleased that you know about this,” he assured. - We tested the aircraft in China. In July 1940, it was put into service under the designation "carborne fighter" marine type 0 model II". On these aircraft, Japanese pilots scored ninety-nine victories and lost only two aircraft - from anti-aircraft fire. As you well know,” the Japanese’s face remained impenetrable, “Reizens participated in two major fleet operations - the raid on Pearl Harbor and the Philippines.
The combined fleet and Zero fighters scored several victories over Wake, Darwin and Ceylon. "Reizens" from shore-based units supported Japan's conquest of the Philippines and the Dutch East Indies.
“Victory has its downside,” Hopkins said. - You can never do without losses. Japan not only defeated the allies, the Empire also lost planes and experienced pilots. But it is not so easy to make up for such losses.
“Wait,” Vasya intervened, “I remember the Japanese had a bright idea of ​​invading Australia.”
“Specifically, on May 7 and 8, 1942,” confirmed Captain Hirata, “a large and glorious battle took place in the Coral Sea.” Japanese fleet against the Allied fleet. The losses were heavy on both sides, but we had to abandon Australia.
...A month later - a new defeat: in the battle at Midway Atoll, Japan lost four aircraft carriers and all the aircraft on them. It was a line, a line. “He waved his hand in the air expressively. - From that moment on, the Japanese advance was stopped. And the Reizens increasingly had to fight defensive battles. And in defensive battle The low survivability of the aircraft and the lack of pilot protection have a serious impact. Actually, that was the main thing vulnerable spot"Reisen."
- Like a samurai sword? - Vasya clarified.
“The sword is an offensive weapon, not a defensive one,” the Japanese noted. “And you were absolutely right in asking about kamikazes,” he added.
Vasya blushed a little.
“Yes, I do, keep the conversation going,” he replied. - Actually, everyone here is friends.
“Oh,” Captain Hirata replied very seriously. - I do not doubt that. A worthy opponent is a warrior's best friend.
“I’m willing to admit it,” Hopkins said. - Moreover, I, in general, really like “Reizens”.
- Really? - asked the Japanese. - I am very pleased to hear that.
- By the way, in American army this plane has been studied well. In June 1942, during a diversionary operation by the Japanese in the Aleutian Islands, one Reisen made an emergency landing on the island of Akutan. The aircraft was transported to San Diego, where it was restored and tested. During the tests, American pilots learned the strengths and weaknesses of this aircraft. All data, naturally, was used to develop effective tactics to combat Japanese fighters.
“Mitsubishi didn’t stand still either,” said Captain Hirata. - In Japan they understood that the fleet needed an improved aircraft. If at low altitudes he could still successfully fight with Allied fighters, then at medium and high altitudes the advantage certainly passed to the Corsairs and Lightnings.
“If he bows to Hopkins one more time, I think I’ll scream,” thought Vasya.
Captain Hirata turned to the American and bowed very politely. Vasya bit his lip.
- What is the main disadvantage of “Reisen”? - said Captain Hirata.
Hopkins replied:
- You tell me.
“I concede this bitter honor to you,” said the Japanese.
- Damn it, the Chinese ceremonies have started! - Vasya couldn’t stand it. - Talk about it.
“Low dive speed,” Hopkins said. - In battles against Allied fighters, Reizen lost in this. Plus the lack of armor protection and tank protection. This problem was fixed, but it was too late. In the battle of the Philippines, Hellcats staged Japanese fighters a real massacre. Starting from forty-four, the Reizens generally no longer had either numerical or qualitative superiority over American fighters.
“It seems to me that it’s time to talk about what occupies our Russian friend most,” Captain Hirata turned to Vasya. - To the kamikaze. You, of course, know that this word means “Divine Wind”. This is the name given to the typhoon that scattered Kublai's fleet when he set out to conquer Japan...
“It was a long time ago,” said Vasya. - There were no carrier-based fighters then.
“Definitely,” the Japanese nodded. For a moment his face clouded over, as if he was trying to imagine what would happen if he appeared in medieval Japan carrier-based fighters. - But the word remains. Japan is very traditional. Beginning on October 25, 1944, these aircraft were increasingly used, along with a 250-kilogram bomb under the fuselage, as kamikaze pilot aircraft. It was on that day that five Reizens with volunteer pilots sank the escort aircraft carrier Saint Lo and damaged several others. In general, Japanese pilots carried out ramming operations in almost all combat operations during the Pacific War.
However, they did not cause significant damage to the enemy - until the pilots of the Special Strike Corps systematically began to do this (they were called “kamikazes”). Kamikazes acted in groups and knew in advance what they were doing. After their first success, they sank a destroyer on November 1, 1944, and damaged five more.
In 1945, kamikazes sank two escort carriers and damaged eight aircraft carriers and two destroyers. In April and May, nine hundred kamikazes were sent to their deaths, of which two hundred hit their intended targets.
“Kamikazes spoiled a lot of blood for the Americans, and the losses were significant,” Hopkins confirmed. - And yet, admit, my friend, that in general the kamikazes did not have any noticeable impact on the course of military operations.
“And the plane is a toy,” interrupted Vasya. - I’m listening to you here, listening... Is it true that we should have some kind of ceremony here? Let's go to Zinaida Nikiforovna, make an impression on her - and see the cars. “He hesitated and then turned directly to Captain Hirata: “Can I take the Reisen someday and try it out?” I suddenly wanted it very much.

© A. Martyanov. 06.07. 2012.