Xiaomi Portable Flashlight is a flashlight with an external battery function. Xiaomi Portable Flashlight - a flashlight with an external battery function Pinning SMS messages from a specific contact
Modern Xiaomi phones are equipped with very good light support, excellent camera and loud sound when making calls. But still, users want to improve the performance with the help of tools, one of which is the flash. But how to turn on the flash on Xiaomi so that the pictures are of higher quality, and it was not difficult to receive an incoming call even in silent mode? In this article, we will talk about two areas where artificial light is needed - when calling and when photographing.
The benefits of flash on calls
Sometimes situations arise in which it is necessary to answer a call, but it is rather problematic to find out about it. The most common problem is a noisy crowded room. For example, at a party, when loud music and people talking make it almost impossible to hear your ringtone.
Vibration may not help either. To recognize it, you must constantly hold the device in your hands. The only correct solution is flash. Thanks to her, the risk of missing an important call is minimized. Announcing illumination is also ideal in “quiet situations”, when a melody or vibration can disturb a person’s rest / sleep.
How to enable flash notification when calling on Xiaomi
Begin:
- We are looking for "Settings" on the main screen, we go.
- Now open "System Applications" (this section may also be called "Embedded Programs").
- A new window opens, where the "Calendar", "Messages" and so on are located. In the middle should be "Challenges". We click.
- We get into the detailed call settings, which allow you to completely change the options at your discretion. Click on "Incoming Calls".
- We see an extensive list of functions and almost at the very bottom - “ Flash notifications».
- Just move the slider to the side On." Ready.
Now calls from any numbers will be accompanied by a bright and high-quality flashing light.
The use of flash when taking pictures
Photography is a rather complex art, but the Xiaomi camera solves a lot of problems. Of course, the quality of the photo depends on the smartphone model and its cost, but even an excellent camera sometimes takes poor pictures in a dimly lit room, not to mention the darkness of the night. There is a way out - turn on additional light on your smartphone.
Let's take a look at the benefits of flash photography:
- Clear lines and good visibility at night. Very relevant for travelers who love to capture the beautiful nature and architecture;
- The absence of falling shadows and "noise" in the photo;
- When it comes to selfies, then soft and smooth facial features, which adds more attractiveness in appearance;
- There is no need to use third-party flashlights that run out quickly or require batteries to work.
How to turn on flash for photos
Here you will need not Settings”, as in the above situation, and the camera is in real time. Open the application of the same name, go to the mode " A photo"And in the upper left corner we find the icon with the image of energy.
Several modes open, from which you need to choose one that suits you best:
- Turn off- just turns off the flash;
- Turn on- turns on the flash with each picture taken, regardless of the degree of illumination and the time of day;
- Auto- the camera determines itself when a flash is needed. Most often it works at the right time, but there are also failures;
- Flashlight- makes a flashlight a real flashlight, which is available on almost all devices, even the most budget ones. They can illuminate objects, being, for example, in a dark room and at the same time take photos with an excellent level of illumination.
Note! In the latter mode, battery power is consumed quite quickly. If you use the flashlight continuously for a couple of hours, the battery will be completely discharged in an hour or two. This is very undesirable when traveling and generally on long trips.
Video instruction
Answers to popular questions
Flash can be used for outgoing calls?
Unfortunately, this is not included in the basic functions of the operating system. Therefore, only in incoming calls. But customization by specific methods from the wizard is possible.
Does the flash work when shooting video?
Xiaomi, which is actively developing in our time, releases phone models with loud sound during incoming calls and excellent high-quality light support. Why not try to combine these characteristics? Flash flash when calling on Xiaomi can be very useful in such cases when it is necessary to answer the call, but it is rather problematic to find out about it.
For example:
- around is very noisy, there is a risk of not hearing the ringtone
- silence is necessary during rest, at study or work, vibration and melody will break it in any case.
Do you notice that you often miss calls in the subway, at parties, with the sound turned off while doing some business?
Lighted call identification will help minimize the risk of missed calls, and you will get rid of the need to constantly hold the phone in your hands.
Installing flash notifications on your mobile phone is easy. It does not require any special knowledge or third-party applications.
We offer step-by-step instructions for turning on the flash when calling Xiaomi:
1. We remove the device from the lock.
2. We go to "Settings" through the curtain or the main screen.
3. Scroll down to the Applications section. We open "System offers", or "Built-in programs" (the name differs depending on the phone model).
4. We see a new window. Approximately in the middle is the column "Phone", or "Calls". We click on it.
5. We find ourselves in the detailed settings of calls. We are interested in "Incoming calls". We press.
6. Before us are additional settings for the behavior of the device for incoming calls. Find "Flash Notification".
7. Move the slider with a simple click to the right position. The dot inside should change color from gray to bright (depending on the theme installed on your device).
8. Ready! Incoming calls will be accompanied by a bright flashing light.
*The instruction is supplemented with photographs illustrating the inclusion of the flash on the Xiaomi Redmi 4X bell.
You have set the light identification for incoming calls, and the question may arise: is it possible to use the flash for outgoing calls as well? Unfortunately, in the Xiaomi model range, this function is not available in the basic settings of the operating system. You can't turn on the flash on your own. but you can refer to the wizard to configure specific methods.
Now you know how you can easily and quickly set the flash on your own when calling Xiaomi. But what if for some reason you need to remove it? And this action will not cause you any difficulties.
So, how to turn off the flash when calling on Xiaomi:
1. We follow steps 1-6 of the instructions for turning on the flash.
A flashlight is a device that should be in every home in case of emergencies and unforeseen situations. Among the products manufactured by Xiaomi, there is such a device. Xiaomi Portable Flashlight combines two options: a flashlight with the ability to adjust the power of the luminous flux and an external battery that can charge other devices. Let's take a look at its main features.
Unboxing
Unlike most Xiaomi products, the flashlight does not come in a white cardboard box, but is packaged in a transparent cylinder.
The characteristics of the device are listed on the sticker attached to the base of the package.
If desired, you can use the "tube" for permanent storage of a flashlight or for carrying in a bag.
The package includes: the flashlight itself, instructions, USB-cable and hand strap. All components are tightly packed inside the box.
Characteristics
model - LPB01ZM;
White color;
3350 mAh lithium-ion battery;
up to 216 hours of continuous operation;
output power - 5V / 1A;
maximum brightness 240 lumens;
11 brightness modes;
overheat protection;
low current mode;
SOS function;
manufacturer - Jiangsu Zimi Electronic Technology Co.
Appearance
The device consists of two parts: a white matte body and a silver glossy head, which contrast well with each other.
There are two shipping stickers on the bottom and top of the flashlight.
The front of the device is responsible for turning on/off and changing the brightness. There are 11 brightness levels in total.
At the back of the device there is one single functional button - it is capable of sending SOS signals - this mode is activated by pressing it three times. The function button also allows you to quickly turn off the flashlight (with a single press). In the middle is the power indicator. In addition, there is a hole for attaching a strap, a Micro USB port for charging the flashlight itself, as well as a regular USB port for using the device in powerbank mode.
The gadget has a completely aluminum body (except for the bottom and top sides).
The flashlight is compact and light enough: its dimensions are 120.2 mm * 25.5 mm * 25.5 mm and weighs 103 grams.
The white USB cable that comes with the package is quite short. Since the plug is not included in the package, it is more convenient to use any other, longer cord to charge the flashlight.
The strap can be attached to the bottom of the Xiaomi flashlight. It is very useful because you can put it on your wrist and thus protect the flashlight from accidentally falling to the ground.
Xiaomi Portable Flashlight is equipped with a regular-shaped lens, under which there is a Lumileds LED. It is capable of delivering up to 240 lumens.
In general, the flashlight has a stylish design.
Usage
In the photos above, the first level of brightness of the flashlight is turned on. It has a soft light and a short glow distance, however, even in the dark, this brightness will be enough to see what is around you.
In the photos above, brightness level 11 is turned on - the flashlight shines more strongly, and the illuminated range is wider, this mode is suitable for use at night or in rooms without lighting. The radius of illumination at the maximum mode is about 20-30 meters.
When the low current mode is activated, the Xiaomi flashlight can act as an external battery that supplies power to the Mi LED lamp and can charge the mobile phone. It should be noted right away that in this mode the flashlight can work for a maximum of two hours. In emergency situations, you see, a useful feature.
The flashlight itself can be charged both from the power bank and from the network. At the same time, the indicator displays the battery level: 0-20% flashes red, 20-50% alternately flashes red and orange, 50-99% alternates green and orange, and when charging is completed, the green light is on. If only orange blinks, then there is some problem while charging.
Feelings of use: the flashlight lies perfectly in the hand, turns on with the effort of one or two fingers. During testing, the device did not turn off spontaneously. With prolonged use, a barely perceptible heating is noticed.
Conclusion
Compact flashlight with elegant design and reasonable price is ideal for daily/household use. And the ability to use the device as a power bank is a useful additional option.
The “flashlight” function in Xiaomi smartphones is built-in, and the camera flash of a mobile phone acts as a light element.
How to turn on the flashlight
The easiest way is to open the curtain, for which you need to swipe the screen from top to bottom. Select the appropriate item from the available menu.
If by default there is no flashlight button in the curtain, then to add it you need to:
How to turn on the flashlight using the widget
To provide quick access to the application, you need to find the appropriate widget and place it on the desktop. For this:
How to turn on flashlight on Xiaomi phone from lock screen
To activate the application when the screen is locked, just press the lock key once, and then hold the Home button for 2-3 seconds. After that, the flashlight should work. The function is available in all phones with the MIUI shell.
How to turn off the flashlight
There are two options to disable the application:
- With the device unlocked, just press the button again to access the flashlight. If necessary, the curtain is lowered;
- To quickly turn off, just press the power button twice in a row. The first press locks the Xiaomi smartphone, and the second turns off the flashlight.
Xiaomi flashlight not working
If it is not possible to enable the application, it is initially recommended to restart the device. If the problem is not solved, then you should try to use it in blocked mode.
Another option is to update the program by downloading a new installation package.
The cause of the breakdown may be a malfunction of the LED module. To check it, you need to take photos with the flash on. If there is no light indication, it is recommended to replace this module.
In this article, we will look at the interesting features of the MIUI shell. You may have heard of some of them, but many interesting features are veiled in such a way that they are difficult to find, so many do not even know about them. Let's consider some of them.
RINGER VOLUME UP
The inclusion of this function is not in the sound settings, as it would be logical, but in the settings of the Phone application. To activate this feature, you need to go to the settings of the "Phone" application and in the "Incoming calls" section, enable the item "Increase in volume". In the same section, you can find other interesting settings, such as:
- Turn off the call when turning over;
- Muting the call when picking up;
- Flash notification;
- Proximity sensor;
- Mute the beginning of the call.
The purpose of each item is explained directly below it (see screenshot).
CHANGING THE BACKGROUND ON THE CALL SCREEN
If you are tired of the blue background when making (receiving) calls, then you can apply lock screen wallpaper there. To do this, go to the settings of the "Phone" application, go to the "Advanced settings" section and in the item "Call screen background" change the value from "Default" to "Lock screen wallpaper".
Also in this section there are other settings:
- Sound when dialing;
- Auto redial;
— Reminder of missed calls;
- Vibration when the interlocutor answers;
- other.
QUICK CHANGE STATUS SMS MESSAGES
In the SMS list, swipe on a message from left to right in order to mark it as read.
QUICK DELETE SMS MESSAGES
Swipe on a message from right to left - delete the current message.
LARGE TEXT WHEN VIEWING SMS MESSAGES
When viewing an SMS message, if you tap twice on the text, the message will be displayed in full screen, in larger text. Convenient when reading long SMS.
REPLY FUNCTION
When receiving SMS, an alert is displayed at the top of the display for a while. To the right of the message there is a "Reply" button, by clicking on it you can write a quick reply.
PINTING SMS MESSAGES FROM A PARTICULAR CONTACT
The pinned message will always appear at the top of the list. To do this, press and hold the message, in the functions that appear at the bottom of the screen, select "Pin". This message will move to the very top and will be marked with a blue arrow in the upper corner. You can pin one or more messages.
HIDING SMS MESSAGES FROM SELECTED CONTACTS
To do this, you need to make a swipe from top to bottom in the list of SMS messages until the "Castle" appears. During the initial setup, you need to enter the password from the MI account. After that, you will need to add a graphic key or a pin code. Further in the settings, enter the phone number (or select from contacts). Now messages from the selected contacts will not be available in the general list, to view them, you need to swipe down again and enter the set password or key (fingerprint unlock is possible).
BLOCKING SMS MESSAGES
When adding certain numbers or prefixes to the "Black List", you will not receive messages from them, they will be automatically blocked. This method also works with phone calls, we will not focus on this further. To add numbers to the blacklist, go to "Security" - "Blacklist". Next, in the settings, add the whole number or prefix (the beginning of the number, for example, 495, calls and SMS from numbers starting with 495 will be automatically blocked). Keyword blocking is also possible for SMS.
SENDING SMS MESSAGES AT THE SPECIFIED TIME
There is an interesting opportunity to send a delayed SMS at the time you choose, and you can select the year, month, day and time. It is very convenient if you need to send a reminder to yourself (to the second SIM card) or someone else, or, for example, set up automatic sending of birthday greetings. When creating SMS, choose who you want to send, enter the required text, click "+" to the left of the message text.
In the window that appears, select the date and time.
The message will look like this. Above the message text is displayed when the message is sent.
Click the arrow to the right of the text to send.
HIDING PHOTOS IN THE GALLERY
Hiding a photo is possible on the same principle as hiding SMS. Activated by swiping from top to bottom in the gallery. The rest of the settings are the same. You must have an MI account.
ROTATE PHOTOS IN THE GALLERY
To do this, just click on the photo in the "Gallery" with two fingers and rotate it in any direction.
QUICK TURN ON THE FLASHLIGHT
MIUI 8- long press the home button on the lock screen.
MIUI 9
CREATING A SCREENSHOT
MIUI 8- there are several options:
- there is a corresponding icon in the curtain;
- press the Menu and volume down buttons at the same time;
- press volume down and power at the same time;
Swipe three fingers across the screen from top to bottom.
MIUI 9- There is a possibility of customization in the "Buttons and gestures" section.
QUICK ACCESS TO ADVANCED VOLUME SETTINGS
MIUI 8- when you press the volume button, a circle appears in the center of the screen, displaying the current volume level. To access additional volume controls, swipe your finger around the circumference of the circle.
MIUI9- when you press the volume button, a bar appears at the top of the screen displaying the current volume. By clicking on the down arrow to the right of the volume, we will display additional settings.
MENU OF RUNNING APPS, DISPLAY OPTIONS
There are 2 display options.
To change the view, you must click on the icon in the upper right corner (marked in red in the screenshots).
You can also change the display using a swipe:
- swipe with two fingers from the center of the screen, up and down (according to the principle of photo enlargement) - large icons;
- swipe with two fingers from the edges of the screen (bottom and top) to the center (according to the principle of photo reduction) - small icons (application icons).
SPLIT DESKTOP
In the menu of running applications, drag the application icon up until two desktops are displayed. This feature is only available on MIUI 9 with Android 7.x.x.
ONE HAND CONTROL
An interesting feature of the MIUI shell, which will be especially useful for owners of smartphones with a large screen diagonal. To activate this mode, you need to swipe from the Home button in the direction in which the screen moves (to the right or to the left). By clicking on the "Gear" in one of the lower corners (depending on where the desktop is shifted), we will get into the settings of this mode, where you can set the size of the desktop to be reduced (in inches).
To exit the published mode, just click on the dark area of the screen.
APP PROTECTION
You can make it so that when you start certain applications, you are required to enter a password. So you can secure the reading of your correspondence in any messenger or mail. You can secure the Gallery app to restrict access to your photos. In the "Settings" for this there is a separate item "Protection of applications". Once there, select the apps you want to protect.
Click Set Password.
Enter and repeat your password. Now the applications you have selected will only run if the correct key is entered.
WIFI. SHARE PASSWORD
It is possible to quickly share the password from the Wi-Fi network to which you are connected with your friends, colleagues, etc. It is much easier and faster than entering a password, especially if the password is complex, long, etc., or you just forgot it. To do this, in the "Settings", in the "Wi-Fi" section, just click on the currently connected network.
A window with a QR code will appear.
Now, to connect to this network on another smartphone, just scan the QR code.
QUICK POWER ON TO MAXIMUM SCREEN BRIGHTNESS
There are times when, when you go outside on a bright sunny day, turning on the screen, you can’t see anything on it, because. The brightness of the screen was set to a very low level, which was convenient for working indoors. It is not always possible even the first time to enter the settings in order to increase the brightness. To do this, there is a convenient function that allows you to increase the brightness of the screen to the maximum, using a keyboard shortcut.
MIUI 8- just press the key combination "Menu" + "Volume +". The maximum brightness is set until the next screen lock. This is enough to adjust the brightness to a comfortable level.
MIUI9-
DISABLE NAVIGATION BUTTONS IN SELECTED APPS
This feature can be useful in games. Often during the game there are accidental button presses under the screen of the smartphone. At the same time, the game crashes. This can be very inconvenient in the midst of events. The MIUI shell has the ability to disable navigation buttons in certain applications. In the "Advanced settings" - "Buttons and gestures", there is an item "Auto-disable navigation buttons". In it, you can select applications and specify how the buttons will be disabled.
QUICKLY ORGANIZE YOUR DESKTOP SHORTCUTS
MIUI 8- just press and hold on an empty space to enter the desktop editing mode, then shake the phone.
MIUI9- This feature is currently not available. Perhaps it will be added in the next firmware versions.
QUICK REMOVAL OF APPS
Due to the fact that in MIUI all installed applications are on desktops, to remove them, there is no need to go to "Applications" and delete them from there. It is enough to press and hold on the application icon and then move it to the top of the screen to the trash. This function works only with installed applications, system applications cannot be deleted in this way.
QUICKLY MOVING A SHORTCULT BETWEEN DESKTABLES
To move an application shortcut (folder) between desktops, you need to hold the shortcut in edit mode and scroll through the desktops with your free hand (finger). After selecting the desired table and position of the shortcut, release it.
CALCULATOR
This application has much more features than you can imagine. In addition to the ability to switch to engineering mode, there are many more interesting features. We list some of them:
- Currency Converter. Allows you to quickly see the amount in another (chosen by you) currency. Exchange rate data is updated via the Internet;
- Mortgage. Allows you to find out the amount of the monthly loan payment by entering the amount, term, and other conditions of the loan;
— translation of various mathematical and other quantities.
To select the display of additional functions in the calculator, you must click on the icon in the upper right corner.
Will be displayed with a choice of additional options.
NOTIFICATION AND SWITCH SHUTTER
The notification shade has changed with the arrival of MIUI 9. Now, swiping down opens only part of the switches and notifications. To display all the switches, you need to make another swipe down. If someone doesn’t like this innovation, in “Settings” it is possible to configure the display of the curtain, as was implemented in MIUI 8. In the “Notification and Status Bar” section, by selecting the “Notifications and Switches” item, you can choose from two display options: "Combine" - MIUI 9 or "Split" - MIUI 8.
Also in this section you can configure the following functions:
- Enable notification filter;
- Select applications from which notifications will be received;
- Adjust the position of the switches in the curtain;
- And much more.
Most of the switches in the blind are active. Those. if you press and hold on it, you will go to its settings, for example: "Wi-Fi", "GPS", "Internet" and many others.
Notifications in the curtain can be quickly deleted (swipe to the right). Mark as "Not important" (swipe left). In this case, you will not receive notifications from this program. Also, some applications have the function of displaying a message in the curtain or displaying additional options, such as: "Answer", "Forward", "Call", etc. To display additional options You need to swipe down with two fingers on the message.
AVAILABLE FUNCTIONS IN THE SECTION "ABOUT PHONE"
And finally, we have saved two, perhaps the most interesting features of the MIUI shell, which are not available in the shells of other manufacturers.
APP CLONE
This function allows you to create a copy of any application, while it will work with its own settings. For example, you have two accounts of a messenger (“WhatsApp”, “Telegram”, “Viber”, etc.). One account is personal, the other is work. Previously, in order to use several accounts on one smartphone, it was necessary to log out of one account and log into the second one, while entering credentials (login, password) each time. This is very inconvenient and takes a lot of time, besides, you could not use both accounts at the same time. The App Clone feature gives you that ability. To do this, go to "Settings" - "Clone applications" and select those applications for which you want to create a clone.
For example, let's create a clone of the Telegram program.
We agree with the cloning of Google services (if such a request appears). After that, a second shortcut for "Telegram" will be created.
As we can see, the application shortcuts are different so as not to be confused in the future. The cloned app has a yellow icon in the bottom left corner. We launch a clone.
The application prompts us to set up an account. We enter our data. Now we have two accounts in the Telegram program. In order to create a clone for another application, we follow the same procedure. To delete - just uncheck the box in the "Clone applications" section opposite the selected application, after which the clone will be deleted.
SECOND SPACE
This function allows you to set up on one smartphone, two independent spaces. Thanks to this, we can have two smartphones in one (virtual of course). For example, you can set up one space for work and another for home (or as "Guest" mode). Each space has its own settings. Also, it is possible to install different applications. To create a second space, go to the "Second Space" section in "Settings" and click "Create Second Space".
In the next window we will see the inscription "Space created" - click "Continue". Now we will be prompted to set a password for the second space, at this stage you can click "Skip" (in the future you can add a password in the settings, if necessary). Next, you will be prompted to install a fingerprint (if your device has a scanner). We skip, as when setting a password. Setup completed. In this window, leave all the items activated and click "OK". We received the second version of our system, which has the standard settings, as if we had just installed it. The desktop differs only in the presence of additional shortcuts (marked in red in the screenshot) for:
- moving applications, photos, etc. between spaces (we will consider a little later);
— management of this space;
- transition to another space.
Also, a corresponding item will appear in the curtain for a quick transition to another space.
Moving data between spaces.
The Application Settings item allows you to configure the use of the selected application only in the first space, only in the second space, or in both at once.
The application can be downloaded and installed from the Play Market (if it is not already installed in another space). To do this, you need to log into your account (accounts may be different).
Items import (export) photos, files, contacts - are used to transfer data between spaces.
When changing a space, you will need to enter a password or fingerprint if the space you are moving to has a password.
In the first space (after creating the second one), a transition shortcut will also appear on the desktop and in the curtain.
To delete the second space, you need to click on the "Trash" in the upper right corner, in the "Second space" section.
Confirm the deletion in the next window.
And enter the password from the MI account.
All the features listed in this article are available in MIUI 8 and 9 skins (maybe some of the features were available in earlier firmware). There are slight differences in their implementation, settings, display, etc. Some of them only work on a specific version of MIUI or Android version. Where necessary, we have pointed out the differences between MIUI 8 and MIUI 9.
We hope that after reading this article, you have learned more about the capabilities of this shell. Many of them can significantly simplify and speed up the work with the device. Try to use the described features in everyday life, we think that this will bring you only positive emotions.
Information for owners of smartphones of other brands. If you want to try out the MIUI skin, you don't have to be the owner of a Xiaomi smartphone to do so. The manufacturer produces its shell for many brands of smartphones. You can see if there is a firmware for your smartphone, as well as download it, using the following links.