The last Soviet heavy tank destroyers. The last Soviet heavy tank destroyers Sample 268

So, dear, as you already know, the valiant balance department, led by the best guide-water-tanker in the world, Murazor, decided that the problem of the unpopularity of the alternative branch of tank destroyers of the USSR is not in dull and unplayable tanks from 7 to 9 lvl, but in the very top 10 lvl, and decided to replace the excellent PT Object 263 with an uber-imba - Object 268 Option 4 with a rear-mounted gun (which is very convenient (NO)) and a closed wheelhouse!

And now we will look at it in more detail (within the framework of those performance characteristics that are available on this moment), let's try to guess how he will play, and what perks and equipment he needs first of all...

Performance characteristics of Object 268 option 4:

Judging by information from ST, this tank will have a good amount of HP of 2100 units, front armor of about 290 mm at an angle of about 60 degrees, NLD - 250mm, sides 100mm + screens (everyone is familiar with the T-10 chitoboards), stern - 45mm at right angles.

This pepelats will have a 152mm M-53S gun, reload time is 20.5 seconds. with penetration by the main AP projectile of 293mm, gold KS - 360mm, and HE - 90mm, with damage of 750 units (1100 for HE) and DPM of 2200 units.

Distinctive feature This device will have a long reload of 20.5 seconds, and an “amazing” final accuracy of - 0.45 and a fantastic projectile speed of 760 m/s. The chassis traverse speed is 30 g/s; this tank will spin in place only mediocrely.

The only thing that the developers offered us was a maximum forward speed of 55 km/h, a reverse speed of 22 km/h, which is not so bad, with a weight of 50+ tons. The gun declination angle is -5 degrees, the gun rotation left-right is 24 degrees. Camouflage 24.4%, 14.6% - in motion, 1.97% - after a shot you will glow like Christmas tree. Overview 370m.

Reservation scheme Ob. 268 option 4:

How to play Object 268 option 4:

How will this Wargaming creation be played? Probably the same as object 268 (from the next branch), or those who firmly believed in armor, like the YagPZ E100, but the essence is the same, this tank is an assault tank, designed to push through or defend a direction, but not like the 1st tank line, and not alone, because a long CD and poor maneuverability will not give you the opportunity to conduct an equal battle with the enemy 1 on 1. And with an oblique weapon you will not be able to fire over long distances.

Equipment for Ob. 268 option 4:

Recommended equipment – ​​Rammer, Reinforced aiming drives (this is a must), Improved ventilation (instead you can install Horns, Splinter Lining or Optics, it all depends on your fighting style).

Commander (Radio Operator) – Sixth Sense, Repair, The Brotherhood of War(BB);

Mech.Water – Repair, Off-Road King, BB;

Gunner – Repair, Smooth rotation of the turret, AP;

Charger – Repair, Non-contact BC, BB;

Loader – Repair, Desperate, BB;

Appearance of Object 268 option 4:

Video review of Object 268 option 4:

Let's sum up the “vanging” result, this tank has good dynamics, armor (I think it will be random like the brothers from the heavy tank branch - screens, bulwarks, etc.) and an average alpha. An oblique (melee) weapon with a long reload time and poor mobility. Time will tell whether this is a worthy replacement for Object 263, but the unique gameplay of PT/ST 263 will no longer exist. All performance characteristics are not final and can be changed by the developers.

During World War II, heavy self-propelled guns played important role on the battlefields. It is not surprising that after its completion the development of heavy self-propelled guns, one of the main tasks of which was the fight against enemy armored vehicles, continued by the designers different countries. Them more surprising fact, that only a few projects reached the metal production stage, and not a single one of these formidable machines went into series. AND Soviet Union, in which a heavy self-propelled gun was created Object 268, was no exception in this regard.

Weight limit

As in the case of heavy tanks, it was assumed that the promising Soviet heavy self-propelled guns would be very well protected vehicles with long 152 mm caliber guns. The first requirements for such installations date back to 1945, although actual work began a year later. They were designed on the basis of the Object 260 (IS-7) and Object 701 (IS-4) tanks.

For the self-propelled gun based on the IS-4, designated Object 715, it was planned to use the 152-mm M31 cannon developed by plant No. 172, which had the same ballistics as the 152-mm high-power BR-2 cannon. The same weapon was planned to be used for the self-propelled gun project Kirov plant in Leningrad. What exactly it was called is not entirely clear. Some sources indicate the index Object 261, others call it Object 263.

Later, the design bureau of plant No. 172 developed an even more powerful weapon, designated M48. In general, it was similar in design to the M31 and had a similar muzzle brake, but the initial velocity of its projectile was increased to 1000 m/s. For such a powerful weapon, destroying any enemy tank or bunker was not a big problem. The same gun was supposed to be placed in the semi-open Object 262 self-propelled gun.

The main obstacle to all these plans was the delay in work on the IS-7 and problems with mastering mass production of the IS-4. Last Activity for both self-propelled guns is dated 1947, after which the work was frozen “until better times.” Which never came.

On February 18, 1949, Resolution No. 701–270ss of the Council of Ministers of the USSR was issued, according to which the development and production of heavy tanks weighing more than 50 tons was stopped. It is natural that, following the IS-4 and IS-7, the development of self-propelled guns based on them was given a long life.

According to the same resolution, SKB-2 ChKZ and a branch of pilot plant No. 100 (Chelyabinsk) were given the task of developing a heavy tank with a combat weight of no more than 50 tons. The work, which received design code 730, led to the creation of the IS-5 heavy tank. The preliminary design of the new heavy tank was presented in April 1949, and already on September 14, the assembly of the first prototype was completed at ChKZ.

It was quite logical to develop a self-propelled gun on the same basis, but the designers were in no hurry to do this. The memory of how the work on self-propelled vehicles based on the IS-7 and IS-4 ended was still vivid. The go-ahead was given only at the moment when it became clear that the 730th object turned out to be quite successful, and its adoption was not far off.

Self-propelled gun Object 116 (SU-152P) being tested. The 152-mm M53 cannon mounted on it was used by OKTB of the Kirov plant as a base for the gun of the new self-propelled gun

In the literature devoted to the T-10 and vehicles based on it, the start of work on an assault self-propelled gun is usually dated to July 2, 1952. In fact, the chronology of events is somewhat different. The fact is that a self-propelled gun is usually made for a very specific artillery system. And the gun that was eventually “registered” on the vehicle known as Object 268 was not even in the project for another 1.5 years after the start of work. But work on this weapon began much earlier.

From this point of view, the history of the new heavy self-propelled gun began back in 1946, when, in parallel with the M31 and M48, the design bureau of plant No. 172 began developing the 152-mm M53 gun. This weapon, with a muzzle velocity of 760 m/s, was developed for the Object 116 self-propelled gun, known as the SU-152P. Both the gun and the installation itself were built in 1948. Tests showed insufficient accuracy of the system, and the project was closed. Nowadays the SU-152P can be seen in the exhibition of the Patriot park. So, it was this artillery system, in a slightly modified form, that was intended as the weapon of a promising self-propelled gun.

Draft design of a 152-mm M53 cannon modified for installation in a heavy self-propelled gun, 1952

Works on new car, which initially did not have any designations, was initially headed by P.P. Isakov. The development of the plant was carried out by the team of the Special Design and Technology Bureau (OKTB) of the Leningrad Kirov Plant. The car was designed in three versions at once, two of which were noticeably different from the Object 268, which is now quite widely known. The fact that the design began before July 1952 is eloquently indicated by the dates in the preliminary designs of the 2nd and 3rd options - April 25, 1952. Already by that time the main parameters of the machine were known. One of the main requirements for self-propelled guns was the weight limit: it combat mass should not exceed 50 tons.

Self-propelled guns based on Object 730, option No. 2. By the way, the first heavy self-propelled gun with a rear-mounted fighting compartment was developed by N. F. Shashmurin back in 1944

Option No. 2 of the designed heavy self-propelled guns provided for the aft placement of the fighting compartment. Due to this, the length of the body was reduced to 6675 mm. The entire bow of the car was occupied by the engine and transmission compartment, so there was no place for the driver there. He was put in fighting compartment, where it was located on the right in the direction of travel. With this arrangement, the driver's visibility turned out to be unimportant.

Such inconveniences were compensated for by the relatively small reach of the gun beyond the dimensions of the vehicle - 2300 mm. The thickness of the front of the cabin ranged from 150 to 180 mm, the sides 90 mm. The upper frontal sheet of the hull was only 75 mm thick, but its angle of inclination was 75 degrees. In a word, the car had quite decent protection. The crew of the car consisted of four people. To facilitate the work of the loader, the shells were placed in a special drum behind the gun.

Project No. 3, which involved installing a gun in a rotating turret, April 1952

The third version of the self-propelled gun looked no less original. By and large, it was not even self-propelled gun, and a tank that, due to its more powerful and heavy weapon the thickness of the armor had to be reduced.

However, the difference between the Object 730 and the projected SU-152 (as this vehicle is designated in the documentation) is quite significant. The designers developed the turret for the self-propelled gun from scratch, and for the normal installation of a 152-mm gun in it, the diameter of the shoulder strap had to be increased from 2100 to 2300 mm. The maximum thickness of the turret armor reached 200 mm. The turret also housed ammunition, the size of which remained the same - 30 rounds. The main ammunition rack was supposed to be placed in the rear niche, which made the loader’s work a little easier.

Because of the new turret, the body also had to be changed, the length of which, compared to the 730, increased by 150 mm. The thickness of the upper side sheets was reduced to 90 mm, and the lower ones to 50 mm, this was done to maintain the combat weight within 50 tons. For the same purpose, the thickness of the upper frontal sheet and the stern sheets was reduced to 60 and 40 mm, respectively. There was no provision for a coaxial machine gun on the self-propelled gun, but it had to be installed at the top anti-aircraft gun KPV heavy machine gun.

Thus, by the summer of 1952, the design of a self-propelled unit based on the Object 730 had not begun, but had already taken full shape. The order of the Council of Ministers of the USSR dated July 2, 1952 rather “legalized” the work on the machine, and also introduced a number of amendments to the already ongoing design work. Around the same time, the self-propelled gun received the design index 268, and the topic itself began to be called Object 268.

The literature indicates that a total of 5 versions of the machine were developed on the subject of Object 268. This is both true and not true at the same time. The fact is that the two options mentioned above were developed even before the final tactical and technical requirements were received. And they didn't even carry the code 268.

Therefore, in fact, we are talking about three versions of the machine, two of which were an evolution of previously developed preliminary designs. Both of these revised versions were ready in December 1952. At the same time, the artillery system that was supposed to be installed in these vehicles was still being designed.

According to preliminary calculations, the initial speed of its projectile was supposed to be 740 m/s. Was taken as a basis self-propelled gun M53, which was redesigned using separate 122 mm units tank gun M62-T. According to calculations, total weight of such a system, which did not have an official designation, was 5100 kg.

Option No. 4 featured enhanced armor protection and a more spacious fighting compartment, which already housed 5 crew members

The revised project of the second version of the self-propelled gun, which received serial number 4, was prepared by OKTB of the Kirov Plant by December 18, 1952. This time the machine already had the code 268, and Zh. Ya. Kotin appeared as its chief designer. Externally, the 4th option was very similar to the 2nd, but in fact the differences turned out to be significant.

To begin with, the length of the hull was increased to 6900 mm, that is, almost to the length of the Object 730. At the same time, the length of the gun barrel beyond the dimensions of the hull decreased by 150 mm. The designers abandoned the beveled aft sheet of the deckhouse, which had a positive effect on the internal volume of the fighting compartment. Such changes were extremely necessary, since, according to the new technical specifications, the crew of the vehicle was increased to 5 people.

The new crew member was the second loader, located behind the commander. The commander himself received a new one commander's cupola with a rangefinder, and in front of him appeared a machine gun mount with a “crooked” barrel. The driver's seat was also slightly altered and received new viewing devices. The system with the “drum” remained in place, while the authors of the preliminary design emphasized that due to the large internal volume it is possible to install more powerful weapons. In parallel with the increase in the volume of the fighting compartment, armor protection increased. The thickness of the lower frontal sheet of the hull was raised to 160 mm. The thickness of the cutting edge remained 180 mm, but the bevels, 160 mm thick, were made at a large angle. With all this, the weight of the vehicle remained within 50 tons.

On December 10, 1952, a revised version of the 3rd version of the self-propelled gun was completed, receiving the 5th serial number. The length of its hull was reduced to the level of the 730th object (6925 mm), while the upper side sheets were redone and became bent. The forehead of the body has also changed slightly, but the thickness of these parts has remained unchanged. Maintaining the hull length within the base tank was due to the installation of the V-12–6 engine, which, by the way, eventually appeared on the T-10M heavy tank. The enlarged turret shoulder strap was later “migrated” to it.

The tower, designed for 4 people, also underwent alterations. The commander here also received a new commander's cupola, but the OKTB Kirov Plant engineers gave the curved-barreled machine gun to the loader. By the way, both redesigned projects also inherited the installation of the KPV anti-aircraft machine gun.

Option No. 5 differed from the previous option No. 3 by a number of alterations and an increase in the crew to 5 people

Both of these options, however, did not go beyond sketch development. In January 1953, the projects were presented to the scientific and technical committee of the Main Armored Directorate (GBTU) and the Ministry of Transport and Heavy Engineering (MTiTM). Having studied them, members of the Scientific and Technical Committee came to the conclusion that these projects require a major rework of the Object 730 hull and are therefore not suitable.

The commission approved a completely different, much more “calm” project for further work, which required minimal modifications to the base chassis. Of the major changes, it only required the installation of a slightly more compact V-12-6 engine, which, by the way, was also included in option No. 5.

A revised version of the project was presented in June 1953. The commission was also presented with a wooden model on a scale of 1:10. And on August 25, a conclusion was given on the topic of Object 268 signed by Colonel General A.I. Radzievsky.

A number of sources indicate that at this stage design work stalled, but that's not the case. Of course, work on the self-propelled gun was somewhat influenced by the adoption of the Object 730 into service on November 28, 1953, which later became the T-10 tank. However, work on the car continued. The leading engineer of Object 268 was N.M. Chistyakov, who had previously worked in Nizhny Tagil as head of the new design sector. There, under his supervision, work began on the Object 140 medium tank, but for a number of reasons the designer left Nizhny Tagil and moved to Leningrad. General management fell on N.V. Kurin, a veteran of the Kirov plant and the author of a number of self-propelled guns.

Draft design of the final version of Object 268, June 1954

There was, however, another reason that slowed down the work on Object 268, which some researchers do not take into account. The fact is that the gun, which was supposed to be mounted on a self-propelled gun, was still at the design stage. Meanwhile, the staff of plant No. 172 did not sit idle. Following the 122-mm M62 cannon, proposed for installation in the promising Object 752 and Object 777 tanks, Perm gunsmiths finally reached the 152 mm caliber at the beginning of 1954.

7 years have passed since the design of the M53, a modified version of which was supposed to be installed on Object 268, and the development of artillery in these years has not stood still. As a result, a project for a 152-mm gun was born, designated M64. The initial velocity of its projectile was almost the same as that of the M53 (750 m/s), but the barrel length was noticeably reduced. Considering that the fighting compartment of Object 268 was located approximately in the same place as the fighting compartment of the T-10, this was very important. For comparison, the modified M53 had a total horizontal length from the turret rotation axis to the tip muzzle brake 5845 mm, and M64 - 4203 mm. With the new gun, the barrel extension was only 2185 mm.

This machine was made in metal. Spring-summer 1957

Officially, the technical design of the M64 was reviewed by the Chief artillery department(GAU) in August 1954. In fact, the OKTB team at the Kirov plant received information on the new weapon earlier. The already mentioned thesis that design work on Object 268 had stalled by the fall of 1953 sounds a little strange given the fact that the drawing documentation for the vehicle is dated 20 June 1954.

The drawings (in total, the design documentation contained 37 sheets) depict a machine that is as similar as possible to the Object 268, which was subsequently built in metal. Conceptually, the vehicle was very reminiscent of the German Jagdtiger self-propelled gun, which was maximally unified with the Pz.Kpfw heavy tank. Tiger Ausf.B.

The fundamental difference between the two vehicles was that Soviet engineers managed not only to fit into the dimensions of the T-10 hull, but also to maintain the same combat weight. And in height, Object 268 turned out to be even slightly lower than the T-10. From previous projects, the vehicle inherited a commander's cupola with a rangefinder. As with its predecessors, the thickness of the hull on the sides and stern had to be reduced, but the thickness of the deckhouse sides increased to 100 mm. The protection of the conning tower from the forehead turned out to be quite impressive - 187 mm. Due to the fact that the cabin was expanded to the total width of the hull, it turned out to be quite spacious.

Between past and future

The final estimate for Object 268 was completed in March 1955. At the same time, the terms for the production of prototypes were approved. According to plans, the first sample of Object 268 was expected to be received in the first quarter of 1956, two more copies were to be manufactured in the fourth quarter. Alas, it was during this period that work began on heavy tanks of a new generation; Chistyakov led the work on the heavy tank Object 278, and this directly affected the time frame for the self-propelled guns to be ready.

As for plant No. 172, it completed the creation of a prototype of the 152-mm M64 gun in December 1955. And in February 1956, after a factory test program, a gun with serial number 4 went to Leningrad, to the Kirov plant.

From the front the car looked very impressive. Surprisingly, it turned out to be lower in height than ISU-152

The delay in work led to the fact that the first prototype Object 268 was completed only by the fall of 1956. In general, the car corresponded to the design documentation, although some changes still took place. For example, it was decided to abandon the convex roof of the cabin. Instead, the self-propelled gun received a roof of a design that was easier to manufacture. The vehicle did not have a machine gun with a “crooked” barrel; in its place, the experimental vehicle had a plug. The shape of the stern sheet of the deckhouse, which they decided not to make bent, also became simpler. This part was made removable, since the gun was mounted and dismantled through it.

The crew of the car remained the same and consisted of 5 people. Thanks to the successful layout, the inside of the machine was not at all cramped; even very A tall man. And this despite the fact that the large-caliber gun’s ammunition load was 35 rounds. The convenience of the crew’s work was due, among other things, to design features guns. Firstly, the M64 had an ejector, which made it possible to minimize the entry of powder gases into the fighting compartment. Secondly, the gun received a loading mechanism, which significantly facilitated the work of the loaders.

Object 268, view from the starboard side

Factory tests of the prototype Object 268 began in the fall of 1956 and ended in the spring of 1957. In general, the machine demonstrated characteristics close to the calculated ones. In terms of driving performance, the Object 268 almost coincided with the T-10, including maximum speed.

Soon after the tests, the self-propelled gun went to the NIIBT Test Site in Kubinka. Firing tests showed that Plant No. 172 did not delay the development of the gun in vain. The M64 was clearly superior in fire accuracy to the ML-20S, which was installed on the ISU-152. The new weapon turned out to be the best and initial speed projectile, both in terms of firing range and rate of fire.

Alas, all this no longer played any role. It was decided to abandon the construction of two more prototypes of Object 268, and the first prototype of the machine went to the museum at the NIIBT Test Site. Nowadays this copy is on display in the Patriot Park. Recently, museum staff managed to bring the self-propelled guns into running condition.

If Object 268 had appeared five years earlier, its chances of going into production would have been very high. The vehicle turned out to be successful, quite convenient for the crew to work with and well protected. But by 1957, a number of events had occurred that together made the launch of a series of similar self-propelled guns pointless.

To begin with, in 1955, the development of new generation heavy tanks began (Objects 277, 278, 279 and 770), which had significantly more high level armor protection. Even the M64 cannon was no longer enough against them. The GBTU was well aware that the designers of armored vehicles abroad were also not sitting still. It turned out that the promising self-propelled gun was armed with an artillery system that was already outdated.

In addition, just in the mid-50s, a program to modernize the ISU-152 began, which significantly extended the service life of these machines. Unlike the Object 268, which was just about to go into production, these self-propelled guns were already here and now. Yes, the ML-20 was inferior to the M64 in all respects, but not so significantly.

Finally, production of the T-10 proceeded at an extremely slow pace. Loading the Kirov Plant and ChTZ with self-propelled guns also meant further narrowing the already narrow trickle of T-10s entering the troops. In addition, plant No. 172 needed to master a new gun to produce a new self-propelled gun.

There was another reason, which largely coincided with why the British at about the same time put an end to their heavy self-propelled guns FV215 and FV4005. The fact is that in 1956 work began on anti-tank guided missile projects. missile systems. On May 8, 1957, the USSR Council of Ministers authorized work on the development of tanks and self-propelled guns armed with guided missiles.

Many will immediately remember “bad Khrushchev,” but let’s face the truth. The anti-tank missile launcher is much more compact than the cannon. Launching a rocket is much easier, and most importantly, it can be controlled in flight. As a result, with a similar charge power, the rocket turns out to be an order of magnitude more efficient. It is not surprising that Object 268 became the last Soviet heavy assault self-propelled gun with cannon weapons.

Draft design of the Object 282T missile tank destroyer, 1958

Work on self-propelled guns based on the T-10 did not stop there. In the same 1957, OKTB of the Kirov plant began developing a vehicle designated Object 282. It is often called a tank, but in fact it was a heavy tank destroyer. It was created to be armed with 170-mm Salamander anti-tank missiles, but due to the fact that the NII-48 team was unable to bring them to fruition, the armament was changed. In the final configuration, the vehicle, designated Object 282T, was to be equipped with either 152 mm TRS-152 anti-tank missiles (22 missiles ammunition) or 132 mm TRS-132 missiles (30 missiles ammunition).

Object 282T during testing, 1959

The vehicle, which entered testing in 1959, was strikingly different from previous self-propelled units. Despite such an impressive ammunition supply and a crew of 2-3 people, the tank became somewhat shorter than the T-10. And most importantly, its height was only 2100 mm. The frontal part of the tank was redone. In addition, the designers moved forward and fuel tanks, separating the crew from them with a 30-mm partition. The car received an uprated V-12–7 engine with a power of 1000 hp. Its maximum speed increased to 55 km/h.

In a word, it turned out to be an extraordinary machine, which was ultimately destroyed by weapons. Tests showed that the Topol control system installed at Object 282T did not work reliably enough, which led to the project’s curtailment.

This was supposed to be the redesigned project, designated Object 282K. It didn’t even get to the point of making it in metal.

In the same 1959, OKTB of the Kirov plant developed a project for an improved machine, designated Object 282K. Its combat weight increased to 46.5 tons, and its overall height decreased to 1900 mm. As planned, the vehicle was equipped with two TRS-132 launchers (20 missiles for each), located on the sides. In the stern there was a 152 mm launcher PURS-2 with ammunition of 9 missiles. The fire control system was completely borrowed from the Object 282T. Due to failures with testing of Object 282T, work on Object 282 did not leave the design phase.

This marks the end of the history of designing self-propelled guns based on the T-10.

Sources and literature:

• Archive of Sergei Netrebenko
• Photo archive of Evgeniy Ivanov
• Domestic Armored Vehicles XX century Volume 3: 1946–1965, A. G. Solyankin, I. G. Zheltov, K. N. Kudryashov, Tseykhgauz, 2010
• Photo album “History of KBM”, 1967
• Author's archive

Object 268 is a USSR level 10 anti-tank self-propelled gun. It has an excellent weapon, but mediocre dynamics and weak armor protection, which makes it vulnerable to enemy shells.

Leveling up

• Research requires 301,000 experience points. The previous tank is Object 704.

Elite equipment

How to play

Object 268 is built on the basis of the T-10 tank, therefore it has good mobility, but it has such disadvantages as insufficient armor protection of the hull and its excessive length.

However, frontal armor is very treacherous: many projectiles, even of the largest calibers, often ricochet off the “pike nose”.

The weapon has excellent penetrating power and significant damage. However, due to the design features, the horizontal aiming angle is very small and in order to aim at a moving target, the body has to be turned further.

A review of 370 meters - standard for level 10 vehicles - allows you to detect the enemy at long distances. The low silhouette of the vehicle, comparable to the Object 704, provides better camouflage compared to its counterparts from other branches.

Advantages

• An excellent weapon in all respects;
• High maximum speed;
• Ricochet cutting
• Good camouflage rate

Flaws

• Weak hull armor;
• Poor agility
• Small angles VN and GN
• Low reverse speed

Crew skills and abilities

Camouflage is upgraded with the first skill; it is necessary for any anti-tank self-propelled gun, and the commander should learn the Sixth Sense for situations when a tank destroyer is discovered. The second skill the commander should learn is Camouflage.

The driver must learn the Virtuoso skill - sometimes its “life” depends on the speed of turning of the tank.

Since there are two loaders on a self-propelled gun, the first one can study the Desperado, and the second one can study the Contactless ammo rack. The Gunner can learn the Sniper to improve his effectiveness on the battlefield.

The third skill is to learn Combat Brotherhood for the entire crew; together with ventilation, this will give a good increase to the skill of the crew.

With the fourth and fifth perks, respectively, the commander can learn Radio Interception and Eagle Eye, the loaders can take Intuition and Fire Extinguishing, the gunner can take Grudge and Master Gunsmith, the driver can learn Smooth Ride so as not to lose extra time when bringing down an enemy tank after stopping and the King of the Off-Road.

Equipment

Those who lack information can install Reinforced aiming drives instead of Coated optics, but personally I like to play due to better review and have the right to the first shot in order to have time to roll away.

Equipment

Bottom line

Object 268 is armed with a weapon with excellent penetrating power and high damage. However, due to the design features, the horizontal aiming angle is very small and in order to aim at a moving target, the body has to be turned further.

The vehicle has good mobility, which allows you to quickly respond to the current situation, and thanks to its low silhouette, you can quietly move from cover to cover and highlight unsuspecting enemies.

At the beginning of the battle, it is important to take a comfortable position behind some kind of cover with the ability to fire in several directions. Object 268 is famous for its rate of fire, so it would be a shame not to take advantage of this advantage.

In short, the gameplay of Object 268 rests on two pillars: the game of camouflage and training for exposure.

Historical reference

The design of Object 268 was carried out as part of the development of heavy anti-tank self-propelled guns. The first prototype of the Object 268 was manufactured in 1956 on the basis of the T-10 heavy tank.

By the time Object 268 passed tests, they had been created and delivered to mass production English basic battle tanks"Chieftain" and American M60.

For effective fight With them, the firepower of Object 268 was not enough, so the vehicle was not accepted for service, and all work on it was stopped.

9-03-2017, 16:43

Good day, tankers, and welcome to the site! Today we will touch upon the topic of the terrifying firepower of Soviet anti-tank equipment, we will talk about tank destroyers of the tenth level of the USSR - this Object 268 guide.

This device is designed on the basis of the familiar Soviet heavy tank, which already says a lot, for example, the presence of armor and good mobility. However, let's consider Performance characteristics Object 268 World of Tanks gradually, without getting ahead of ourselves, so that everyone can learn as much as possible about this machine and understand what it is capable of.

TTX Object 268

First of all, every owner of this self-propelled gun must understand that he has an average safety margin by PT-10 standards, as well as a frankly low basic viewing range of 370 meters.

If you look at what Object 268 characteristics reservations are all very relative. Remembering that our building is from heavy tank T-10, you still can’t rely on it, because even with a pike nose, the reduction here rarely exceeds 250 millimeters, that is, in most cases, top-end equipment will penetrate us here quite easily, although ricochets are possible.

The frontal part of the cabin is famous for its greater security, thanks to good inclinations to penetrate PT-SAU Object 268 sometimes it can be very difficult here. The closer to the gun, the better the angle of the armor, and in the thickest places the figures can even exceed 600 millimeters. But the contrast is unusually great, since there are areas about 190 millimeters thick, which Once again speaks of the enormous influence of the case, maybe they will break through, maybe not.

Side projection Object 268 WoT capable of surprising its owner. Firstly, the 100-mm sides of the cabin, with a reasonable additional rotation of the hull, reach a reduction of over 300 millimeters. Secondly, the hull has a bulwark and tracks, all of which can eat up enemy shells, and the main armor behind the screens is not weak.

If we really talk about vulnerable places, Firstly tank Object 268 easily penetrates the rangefinder on the roof, and also try to hide the body. In general, our self-propelled gun has armor, but I don’t recommend relying on it completely. It is better to hope for invisibility, since the camouflage of this device is very good.

As for mobility, which we briefly mentioned at the very beginning, it is there, but you shouldn’t expect much. World of Tanks Object 268 has good maximum speed, our dynamics are also not bad, but you can’t call the device a high-spirited vehicle, nor very maneuverable.

gun

It is clear from everything that in terms of general tactical and technical characteristics this self-propelled gun acts as a strict average, which is capable of surprising, but does it every once in a while. However, all the power PT-SAU Object 268 lies precisely in the armament, because the gun we have on board is very formidable, although not without its drawbacks.

To begin with, I would like to note the fact that Object 268 gun has far from the most terrible, but still very powerful alpha strike. At the same time, our rate of fire is also quite decent, that is, we can inflict about 2700 net levels per minute.

The real horror for any enemy encountered on the battlefield is our penetration. Ordinary armor-piercing projectile soviet tank Object 268 penetrates 303 millimeters of armor, with such indicators you can “sew” strands into the forehead. And for those cases when the enemy is positioned too well, we have cumulative weapons with simply sky-high penetration, carry them with you at least a little, they will come in handy.

In terms of accuracy and long range shooting, tank Object 268 World of Tanks succeeded again, since our spread is very compact. But the gun takes a long time to assemble and its stabilization is poor, this is the first disadvantage.

The second and even more annoying nuance is that the barrel bends down only 5 degrees, which greatly complicates the choice of position, but the total angle of 12 degrees during prolonged reduction brings maximum inconvenience. Playing on Object 268 WoT, you have to often wag your body to shoot, and you spend a lot of time trying to re-aim and this is often annoying.

Advantages and disadvantages

Since we have already considered General characteristics machine and the parameters of its weapons, it’s time to sum up the first results, highlighting the main strengths and weak sides PT-SAU Object 268. For clarity, we will break down all these nuances point by point, so it will be easier for you to navigate.
Pros:
Good armor forehead cutting;
Quite thick shielded sides;
Good mobility;
Excellent camouflage;
Powerful alpha strike and decent DPM;
Excellent penetration;
Good final accuracy.
Minuses:
Weak review indicators;
Mediocre armor on the front of the hull;
Long mixing;
Problematic horizontal aiming angles;
Poor negative gun declination angle.

Equipment for Object 268

This unit has disadvantages that need to be leveled out, but there are advantages that, if strengthened, this self-propelled gun will become an order of magnitude more dangerous. So, to achieve maximum efficiency in battle on tank Object 268 equipment It's better to install the following:
1. – despite already having good damage per minute, it is always worth increasing it, because there is no limit to perfection.
2. – if you speed up the convergence, it will be easier for you to implement the PDM and, moreover, mediocre horizontal aiming angles will bring less inconvenience.
3. – the presence of a closed wheelhouse gives us the opportunity to increase all the initial parameters of the tank by 5%, why not take advantage of this.

However, there is still a worthy replacement for the third point; you can put . The point is that the review World of Tanks Object 268 really weak, and to depend less on allies, and also to get the right to the first shot at difficult situations, it is better to have a good viewing range.

Crew training

Despite the fact that often the issue of choosing and distributing skills between crew members is quite complex, in this case this aspect will be more than standard. Of course, it is still undesirable to make mistakes, so for Tank destroyer Object 268 perks It's better to download in this order:
Commander (radio operator) – , , , .
Gunner – , , , .
Driver mechanic - , , , .
Loader – , , , .
Loader – , , , .

Equipment for Object 268

It is difficult to make a mistake in purchasing consumables, because this is another standard in which we are guided by our silver reserves. If you need to save money, you can carry a set of , , . In other cases, do not skimp, give preference to reliability, that is, Object 268 equipment buy as , , . Moreover, this self-propelled gun rarely burns, which means it can be transported.

Tactics for playing Object 268

It is quite difficult to identify the only possible application of our Object 268 in random battles. There are a great variety of tactics for self-propelled guns, from passive light in the presence of a stereo tube, to active offensive actions in the center of the battle. At the initial stages of the game, for example, you can easily occupy a key point to conduct reconnaissance of enemy forces, and relying on our excellent camouflage indicator, transmit primary information about the enemy’s actions to your allies, and then successfully change the position to the one familiar to a tank destroyer.

When the enemy team is illuminated by allies, Soviet tank Object 268 can be on the second line, causing damage to opponents and remaining undetected. When playing on urban and inconvenient maps for long-range combat, on Object 268 tactics may imply the role of a support tank. In this case, we roll out around the corner, cause damage and immediately hide back; it is advisable to do all this while reloading the guns of enemy tanks. In such cases, the support of allied tanks is indispensable, since alone World of Tanks Object 268 highly vulnerable, which is explained by poor maneuverability and lack of a turret.

Endgame (later stages of the game) Object 268 WoT tank becomes quite a serious obstacle for the enemy team - excellent camouflage, and therefore the right to the first shot, will more than once save you from inevitable defeat. In such cases, a self-propelled gun will not fail, because by the end of the game there are not so many opponents with a strength indicator exceeding our one-shot damage, and therefore for us, in fact, everyone becomes “one-shot”.

Very useful advice when playing on Object 268 World of Tanks(and on almost any other tank) - carefully monitor the mini-map; information not read on the mini-map in time will become a deep wound for you, unexpectedly received from the stern and inevitably destroying you to the very last point of strength.

Beware of artillery shells - hitting the roof of a self-propelled gun in most cases leads to maximum damage, which is fatal to PT-SAU Object 268. When choosing tactics for the vehicle in question, carefully study the composition of the allied and enemy teams, plan your actions in battle in advance, this will help you realize your full potential WoT Object 268 and bring victory to the team.

General idea how to play Object 268 you got it, and all we can do is wish you good luck in the battles, be careful, try to use all the advantages of your vehicle and beware of artillery.