Etks mechanical engineering and metalworking. Unified Tariff and Qualification Handbook (etcs)

Almost every employer asks the question “How much should an employee of a certain profession be paid?”. The reason for the appearance of such questions is that the salary of employees can vary depending on many factors. The main factor on which the amount of remuneration depends is the qualifications of the employee, because workers with specific skills in a particular industry can produce more quality products and services.

The abbreviation ETKS stands for "Unified Tariff qualification guide jobs and professions of workers. At first glance, one might think that this is a kind of book, but in fact, ETKS is a huge collection of essays, which has more than 50 volumes. Experts are constantly working on its improvement.

This directory contains information about all professions that exist in the territory Russian Federation. This information is presented as tariff-qualification characteristics, which were developed in accordance with each category of each specialization of workers. These characteristics include the requirements put forward for workers of each qualification in a particular profession.

ETKS professions is official document, which is approved by the authorities and has legislative force in some moments. The prerequisites for its creation appeared in the Soviet Union: each worker in the country received a salary in accordance with his professional skills and rank.

Advanced training assumed an increase in job responsibilities, remuneration and, accordingly, a document on the assignment of qualifications had to be submitted to the workplace.

Relevance of the directory

The relevance of this handbook is as follows:

• This system, as it was, and remains very convenient. Since ETKS has been developed for quite a long time, and changes continue to be made to it, it is perfected to the smallest detail. The employer does not need to determine how much to pay his employees. It will be enough for him to look into this directory and find the relevant requirements for workers in the desired profession.
• The second point is that the public sector of the economy has been preserved in the Russian Federation. It must necessarily be dominated by order and control, for the reason that we are talking on the state budget, which must be clearly planned, and on the state budget expenditures must be reported.
• When it comes to private business, important point in the relations of a private entrepreneur with the state are taxes, benefits and the Labor Code and other documents that include the norms labor law. In tax audits, with the help of ETKS, any expenses and differences in wages of workers in the same profession can be justified. For example, two locksmiths will have different salaries because they have different ranks.

ETKS is used in such institutions:

• in organizations of large-scale production;
• in educational organizations;
• in public authorities;
• in firms in order to regulate the activities of employees.

The principle of working with a document

General provisions

General provisions prescribed in the ETKS professions:

• ETKS must be applied in all organizations of any areas of economic activity;
• It is intended to carry out billing of work, to assign qualification categories to workers, to draw up and improve programs to improve their qualifications in all areas of economic activity;
• It includes the characteristics of professions, which are grouped by production and type of work, regardless of the form of ownership. All characteristics are developed in accordance with the requirements of the scientific organization of labor and scientific and technological progress, as well as in accordance with the increasing requirements for the level of education and training of workers;
• The characteristics of professions were developed in relation to the 8-digit tariff scale. The exceptions are the cases specified in the specifications. The categories of work are set according to the level of complexity, not taking into account working conditions. If necessary, working conditions are taken into account when raising salaries;
• The tariff and qualification characteristics given in the ETKS include a description of the jobs by profession that are most often encountered. A specific list of duties, their order of implementation is established in organizations.
• The tariff-qualification characteristics of high ranks of professions do not indicate the list of jobs of low ranks, because it is assumed that representatives of such professions will have the skills that are provided for workers of a lower rank;
• Along with the requirements prescribed in the tariff and qualification characteristics, the employee must also possess:
  • knowledge rational organization labor, and if he works in a team, then its organization of labor;
  • work performance technology, equipment operation rules;
  • requirements for the quality of work;
  • knowledge in the field of labor protection;
  • job description and labor regulations;
  • methods of increasing labor efficiency;
  • establishment procedure wages, bonus payments, assignment of qualification categories, etc.;
  • workers involved in the maintenance of equipment must have knowledge of plumbing at the level at which he will be able to independently eliminate problems that have arisen in the work process.
• Advanced training or rank is considered by a commission convened at the enterprise. The worker will have to answer the questions asked by the commission, to perform certain work. For non-compliance with the internal labor schedule, a worker can be lowered in rank;
• Professions fall into the following categories:
  • occupations that require special training and are qualified;
  • performance simple jobs, which are associated with the use of hand tools, most often provided to unskilled workers.

Description details and examples

For an illustrative example, you can take the profession of a car mechanic and its characteristics indicated in the ETKS. As stated in the reference book, the first and second ranks in this profession are considered student, and the third can be assigned to a worthy specialist.

So, what is indicated in the ETCS:

Positions common to all sectors of the economy

The first section of the ETKS includes the professions of workers in all sectors of the economy. It was developed on the basis of the ETKS issue that was in effect before. In this section, the rates of work have been improved in accordance with scientific organization labor and scientific and technological progress.

Usually in this directory, each profession is placed in a specific section and occurs only once. The first section contains professions that are not specific to a particular industry.

Below is an example of a section of professions for all sectors of the economy:

This is an example of an ETKS design. To find the right profession, you need to find the right section on the Internet, and from there take all the information of interest.

Where and what editions can be downloaded

In 2019, the ETKS remains relevant as amended in 2008. In total, there are 68 published brochures in the Russian Federation, representing the entire characteristics of most professions. They are grouped by industry to make it easier to find. You can download ETKS as the entire guide, or by sections.

It includes the following sections:

• "Professions for all sectors of the economy";
• "Foundry works";
• "Oil and gas production works";
• "Construction works";
• "Production of equipment";
• "Restoration works", etc.

The very first edition of ETKS was issued back in the Soviet Union, in the 80s. After that, it is constantly being refined by specialists. Finding sections of the directory on the Internet is not difficult, so anyone can download it for free and find out for their specialty, what requirements are put forward for it, and what payment should be.

Communication with accounting

ETKS is necessarily used by organizations that have chosen a tariff system as a settlement with their employees. The basis for the calculation of wages are the tariffs indicated in this handbook, as well as the nature of the work and its complexity.

This document states that the salary of workers may be higher than specified if there are conditions that complicate the labor process. In accordance with labor legislation, if a tariff-free remuneration system was chosen, then salary accounting should be carried out in accordance with, otherwise, when calculating salaries, it will be necessary to rely on the rates specified in the ETKS.

Employees structural divisions In the course of their activities, they can make such mistakes, which are quite common:

• The employee does not correspond to the qualifications of the position held. According to labor law, some professions can be performed by people with the appropriate education. If the employee performs his duties competently, then a commission may be convened to assign him the highest rank. Most often, an unqualified employee occupies a position, and this is a gross violation of the Labor Code of the Russian Federation;
• The second popular mistake is the appointment of incentive payments without reason. Here we are talking about the fact that the organization must have certain documents regulating the calculation of bonuses.
• Another violation is the erroneous calculation of wages during overtime work, and the labor process in difficult conditions. According to ETKS, wages in such situations should increase. The organization should have a strategy of behavior in such situations, which the accountant will rely on when calculating salaries.

The use of ETKS professions in practice

ETKS becomes necessary in such situations:

• drawing up an employment contract;
• increase in the rank of an employee;
• calculation of wages, depending on the qualifications assigned;
• assessment of special skills and abilities of personnel.

In practice, this handbook becomes necessary immediately when an employment relationship begins. As soon as an employment agreement begins to be drawn up, problems arise in establishing the duties of a potential employee. These responsibilities should be fixed in the text of the contract or in the job description.

To solve this problem, the employer will need to contact the ETCS of professions. To do this, you need to find the right edition of the guide. The sections in these editions are in a chaotic order.

Some editions of this handbook have the same title but different content. This happened due to the constant updating of production technologies. With the advent of the Internet, the problem of finding the right issue of ETKS has virtually disappeared, making it easier for payroll personnel or assessing worker skills.

Unified Tariff and Qualification Directory of Works and Professions of Workers (ETKS), 2017
Issue No. 46 ETKS
The issue is approved by the Decree of the Ministry of Labor of the Russian Federation of July 3, 2002 N 47

sewing equipment operator

§ 40. Operator of sewing equipment of the 3rd category

Job Description. Conducting the process of processing parts of medium complexity on sewing automatic or semi-automatic equipment. Ensuring the smooth operation of the serviced equipment. Troubleshooting minor issues with equipment. Quality control of the cut, color matching of parts, products, threads, buttons and applied materials.

Must know: technological parameters of parts processing; types of seams; types and properties of the materials used; purpose and principle of operation of the serviced equipment; purpose and rules for the use of various devices, devices and automation tools.

Work examples:

1. Sewing up the toe of hosiery.

2. Overcasting of loops of openings.

3. Processing of valves, straps, cuffs, leaflets, slots, Pat.

4. Sewing on buttons.

5. Fastening of clothing parts.

6. Connecting fittings.

7. Stitching seams, tucks.

§ 41. Operator of sewing equipment of the 4th category

Job Description. Conducting the processing of complex parts of garments on sewing automatic or semi-automatic equipment, participation in their adjustment. Conducting the laying process various materials in accordance with their calculations rational use on an automated spreading complex.

Must know: assortment of garments and technological parameters for processing their parts; the purpose and principle of operation of the serviced equipment, the rules for its adjustment; methods and techniques of laying materials, taking into account their rational use; a system for setting the laying modes on the control panel of automatic equipment; tolerances and rules for setting the length of the flooring; methods for regulating the lifting mechanisms and the speed of movement of the spreading device; requirements for the quality of the flooring; properties of materials and features of their laying.

Work examples:

1. Quilting fabrics with curly stitches.

2. Processing collars, sides, lapels, pockets.

3. Connection of product details (tights).

§ 42. Operator of sewing equipment of the 5th category

Job Description. Managing the process of manufacturing particularly complex products on sewing automatic or semi-automatic equipment. Conducting the process of cutting various materials on an automated cutting complex with program control. Maintenance automated cutting complex. Conducting the process of quality control of various materials using electronic computers. Calculation of pieces and residues of materials on an electronic computer (ECM) and their acquisition for cutting by article, color and size.

Must know: arrangement of serviced equipment and methods of its adjustment; the principle of operation and rules for the operation of an automated cutting complex, the adjustment of cutting modes; requirements for the quality of the cut; methods and techniques for checking the quality of controlled materials; rules and methods for calculating pieces of materials, cutting schedules, material consumption rates and the permissible percentage of technological waste.

§ 43. Operator of sewing equipment of the 6th category

Job Description. Conducting the process of cutting various materials on an automated cutting complex with program control and its adjustment. Participation in the development of the cutting program. Maintenance of automated cutting complex and participation in its repair.

Must know: the principle of operation and rules for the operation of an automated cutting complex; design features serviced complex; arrangement of mechanical, electrical and pneumatic subsystems; causes of malfunctions in the operation of an automated cutting complex, ways to prevent them; requirements for the quality of cutting, adjustment of cutting modes.

Requires secondary vocational education.

4th edition, revised
(approved by resolution of the Ministry of Labor of the Russian Federation of August 21, 1998 N 37)

With changes and additions from:

January 21, August 4, 2000, April 20, 2001, May 31, June 20, 2002, July 28, November 12, 2003, July 25, 2005, November 7, 2006, September 17, 2007 , April 29, 2008, March 14, 2011, May 15, 2013, February 12, 2014, March 27, 2018

The qualification directory of the positions of managers, specialists and other employees is a regulatory document developed by the Institute of Labor and approved by the Decree of the Ministry of Labor of Russia of August 21, 1998 N 37. This publication includes additions made by decrees of the Ministry of Labor of Russia of December 24, 1998 N 52, dated February 22, 1999 N 3, January 21, 2000 N 7, August 4, 2000 N 57, April 20, 2001 N 35, May 31, 2002 and June 20, 2002 N 44. The directory is recommended for use in enterprises, institutions and organizations of various sectors of the economy, regardless of ownership and organizational and legal forms in order to ensure the correct selection, placement and use of personnel.

The new Qualification Handbook is designed to ensure a rational division of labor, create an effective mechanism for delimiting functions, powers and responsibilities based on clear regulation labor activity workers in modern conditions. The directory contains new qualification characteristics of civil servants' positions related to the development of market relations. All previously valid qualification characteristics have been revised, significant changes have been made to them in connection with the transformations carried out in the country and taking into account the practice of applying characteristics.

In the qualification characteristics, the unification of the labor regulation standards for employees was carried out to ensure a unified approach to the selection of personnel of appropriate qualifications and compliance with uniform principles for charging work based on their complexity. The Qualification characteristics take into account the latest legislative and regulatory legal acts of the Russian Federation.

Qualification directory of positions of managers, specialists and other employees

General provisions

1. The qualification directory of positions of managers, specialists and other employees (technical performers) is intended to address issues related to regulation labor relations, ensuring an effective personnel management system at enterprises * (1), in institutions and organizations of various sectors of the economy, regardless of ownership and organizational and legal forms of activity.

The qualification characteristics included in this issue of the Handbook are regulatory documents designed to justify the rational division and organization of labor, the correct selection, placement and use of personnel, ensuring unity in determining the duties of employees and the requirements for them. qualification requirements, as well as decisions made on compliance with the positions held during the certification of managers and specialists.

2. The construction of the Directory is based on the job description, since the requirements for the qualifications of employees are determined by their job responsibilities, which, in turn, determine the names of the positions.

The directory was developed in accordance with the accepted classification of employees into three categories: managers, specialists and other employees (technical performers). The assignment of employees to categories is carried out depending on the nature of the predominantly performed work that makes up the content of the employee's work (organizational-administrative, analytical-constructive, information-technical).

The names of the positions of employees, the qualification characteristics of which are included in the Directory, are established in accordance with the All-Russian Classifier of Occupations of Workers, Positions of Employees and Pay Grades OK-016-94 (OKPDTR), which came into force on January 1, 1996.

3. The qualification guide contains two sections. The first section provides the qualification characteristics of industry-wide positions of managers, specialists and other employees (technical performers), which are widespread in enterprises, institutions and organizations, primarily in the manufacturing sectors of the economy, including those on budget financing. The second section contains the qualification characteristics of the positions of employees employed in research institutions, design, technological, design and survey organizations, as well as editorial and publishing divisions.

4. Qualification characteristics in enterprises, institutions and organizations can be used as normative documents direct action or serve as a basis for the development of internal organizational and administrative documents - job descriptions containing a specific list of job responsibilities of employees, taking into account the peculiarities of the organization of production, labor and management, as well as their rights and responsibilities. If necessary, the duties included in the description of a particular position can be distributed among several performers.

Since the qualification characteristics apply to employees of enterprises, institutions and organizations, regardless of their industry affiliation and departmental subordination, they present the most typical work for each position. Therefore, when developing job descriptions, it is allowed to clarify the list of works that are characteristic of the corresponding position in specific organizational and technical conditions, and requirements are established for the necessary special training workers.

In the process of organizational, technical and economic development, mastering modern management technologies, introducing the latest technical means, taking measures to improve the organization and increase labor efficiency, it is possible to expand the range of duties of employees in comparison with the established corresponding characteristic. In these cases, without changing the official name, the employee may be entrusted with the performance of duties stipulated by the characteristics of other positions, similar in content to work, equal in complexity, the performance of which does not require a different specialty and qualifications.

5. Qualification characteristics of each position has three sections.

The section "Job Responsibilities" establishes the main labor functions that can be entrusted in whole or in part to the employee holding this position, taking into account the technological homogeneity and interconnectedness of work, allowing for optimal specialization of employees.

The "Must know" section contains the basic requirements for an employee in relation to special knowledge, as well as knowledge of legislative and regulatory legal acts, regulations, instructions and other guidance materials, methods and means that the employee must apply in the performance of official duties.

In the "Qualification Requirements" section, the level vocational training the employee necessary to perform the prescribed job duties, and the requirements for work experience. The levels of required vocational training are given in accordance with the Law of the Russian Federation "On Education".

6. In the characteristics of the positions of specialists, within the same position without changing its name, an intra-position qualification categorization for remuneration is provided.

Qualification categories for remuneration of specialists are established by the head of the enterprise, institution, organization. This takes into account the degree of independence of the employee in the performance of official duties, his responsibility for decisions made, attitude to work, efficiency and quality of work, as well as professional knowledge, practical experience, determined by work experience in the specialty, etc.

7. The Directory does not include the qualification characteristics of secondary positions (senior and leading specialists, as well as deputy heads of departments). The duties of these employees, the requirements for their knowledge and qualifications are determined on the basis of the characteristics of the corresponding basic positions contained in the Directory.

The issue of the distribution of duties of deputy heads of enterprises, institutions and organizations is decided on the basis of internal organizational and administrative documents.

The use of the official title "senior" is possible provided that the employee, along with the fulfillment of the duties stipulated by the position held, manages the executors subordinate to him. The position of "senior" may be established as an exception and in the absence of performers in the direct subordination of the employee, if he is assigned the functions of managing an independent area of ​​work. For positions of specialists for which qualification categories are provided, the official title "senior" is not applied. In these cases, the functions of managing subordinate executors are assigned to a specialist of the first qualification category.

The job responsibilities of the "leaders" are established on the basis of the characteristics of the respective positions of specialists. In addition, they are entrusted with the functions of a manager and a responsible executor of work in one of the areas of activity of an enterprise, institution, organization or their structural divisions, or duties of coordination and methodological leadership of groups of performers created in departments (bureaus), taking into account the rational division of labor in specific organizational units. -technical conditions. The requirements for the required work experience are increased by 2-3 years compared to those provided for specialists of the first qualification category. Job responsibilities, knowledge requirements and qualifications of deputy heads of structural units are determined on the basis of the characteristics of the respective positions of heads.

The qualification characteristics of the positions of heads (heads) of departments serve as the basis for determining the job responsibilities, knowledge requirements and qualifications of the heads of the relevant bureaus when they are created instead of functional departments (taking into account industry specifics).

8. The compliance of the duties actually performed and the qualifications of employees with the requirements of job characteristics is determined by the certification commission in accordance with the current regulation on the procedure for conducting certification. Wherein Special attention paid attention to the quality and efficiency of work.

9. The need to ensure the safety of life and health of workers in the process of labor activity puts forward the problems of labor protection and the environment as urgent social tasks, the solution of which is directly related to the observance by managers and each employee of an enterprise, institution, organization of existing legislative, intersectoral and other regulatory legal acts on labor protection, environmental standards and regulations.

In this regard, the official duties of employees (managers, specialists and technical performers), along with the performance of the functions provided for by the relevant qualification characteristics of the position, provide for mandatory compliance with labor protection requirements at each workplace, and the official duties of managers - ensuring healthy and safe working conditions for subordinate performers, as well as monitoring their compliance with the requirements of legislative and regulatory legal acts on labor protection.

When appointing to a position, it is necessary to take into account the requirements for the employee to know the relevant labor safety standards, environmental legislation, norms, rules and instructions for labor protection, means of collective and individual protection against the effects of hazardous and harmful production factors.

10. Persons who do not have special training or work experience established by qualification requirements, but who have sufficient practical experience and performing qualitatively and in full the tasks assigned to them official duties, on the recommendation of the attestation commission, as an exception, they can be appointed to the relevant positions in the same way as persons with special training and work experience.

Requirements for professions that determine professional standards and the development of technologies are constantly changing, in connection with this, the process of changing, adjusting and updating curricula, in particular for railway professions, is constantly going on. Last week we received training programs agreed and approved by the Ministry of Transport and the Federal Agency railway transport by profession:

Learning to operate a railway crane

Last week, the theoretical training of a railway crane operator was completed. It was the railway crane operators who studied, taking into account all the specifics: shunting, signaling and safety rules on railway... The course focused on cranes KDE-251 and KZhDE-25, as well as EDK-1000/2 with increased lifting capacity up to 125 tons.

Next week, students will go to our training ground, where they will put into practice the theoretical knowledge gained under the guidance of experienced instructors.

Introduction to oil and gas production

Where does oil come from? How is it mined and what is it processed into? How are drilling rigs built, drilled and completed wells?

All this was discussed at the course "Introduction to oil and gas production", which was held by specialists from the oil and gas division of PromResurs last week.

Although the course has ended, we will be happy to repeat it for you.

The course will be useful to you if:

We studied: Training of galvanizers

There are a little more people who have mastered a qualified specialty, Hooray!

Our specialists conducted another training for employees of the electroplating shop with the organization of theoretical and practical exercises. In the course of practical exercises, work was carried out to cover parts of complex shapes.

Now electroplating will be able to independently perform the declared work, and the company will not spend invaluable time on their training in the process of working on productive parts and will reduce the level of defects in their production.

We are waiting for everyone who has not completed the training yet!

Recruitment of the Railway Crane Operator group in July

Friends, at the end of July, training in the profession of "Railway Crane Operator" will begin.

Training will consist of 2 parts: Theoretical and Practical.

The theoretical part is held from July 31 to August 18, 2017. The training will cover topics such as crane construction, operation, loading and unloading, railway signaling and the basics of maneuvering.

Signalman on the tracks of Russian Railways

Railway specialists training center"PromResurs" has adjusted the training program for the profession "Signalist" in accordance with the requirements of Russian Railways. In particular, the requirements of the instructions on labor protection and the job requirements of the signalman, approved regulations RUSSIAN RAILWAYS. Also, as part of the training, the mastering of the profession "Road Technician" is carried out - a mandatory requirement when working as a signalman on public tracks.

Buy a license - what's behind it?

Very often you can see ads with a screaming headline “Buy a certificate”, “Buy a crust”, “Buy a certificate”. And we are not talking about buying the forms of certificates themselves, but about selling a ready-made certificate in your name, which confirms the qualifications you have declared. They offer to buy everything, from a labor protection certificate, fire safety, and ending with working professions, such as a slinger, a turner, etc.

Developed on the basis of five current occupations, developed on the basis of nine current occupations, developed on the basis of two current occupations. The section includes professions and , placed earlier in other issues of ETKS; the professions were renamed: "Laboratory assistant of the laboratory of artificial aging of glass and glass products" into the profession, "Autolift operator" into, "Auxiliary (transport) worker" into, "Refueller with fuels and lubricants" into.

In the section, the number of professions has been reduced to 109 items. Professions: "Wood splitter", "Photolaborator" and "Shorter" are excluded from the section and unified with similar professions in other issues of ETKS.

The section includes new professions:,. The tariff and qualification characteristics placed in this section of the ETKS are mandatory for the tariffing of work and the assignment of qualification categories to workers at enterprises, organizations and institutions of all industries National economy, regardless of departmental subordination, except in special cases.

In the section, the billing has been improved similar works, the tariff and qualification characteristics of the professions of workers have been clarified in connection with a change in the content of labor under the influence of the acceleration of scientific and technological progress, increased requirements for product quality, qualifications, knowledge, general education and special training of workers. ETKS contains tariff and qualification characteristics, grouped into sections by production and types of work, regardless of the enterprises (organizations) of which ministry (department) these productions or types of work are available.

In ETKS, as a rule, each profession is found in only one of the sections. This section includes occupations of workers that are not specific to any particular industry or type of work. The tariff and qualification characteristics of the professions of workers are developed in relation to the six-digit tariff scale. The categories of work are set according to their complexity, as a rule, without taking into account working conditions.

In addition to individual issues containing tariff and qualification characteristics, as a reference material when using the ETKS, the following were published: The list (alphabet) of professions included in the ETKS indicating the names of professions in the previously valid issues and sections of the ETKS, the List of the names of professions provided for by the current issues of the ETKS, indicating the changed names of professions and sections of the ETCS in which they are included, as well as the List of issues and sections included in them.

The procedure for using tariff and qualification characteristics, assigning and raising ranks, making changes and additions is indicated in the Unified Tariff and Qualification Reference Book of Works and Professions of Workers of the National Economy of the USSR, placed at the beginning of this issue of ETKS. When using this issue of ETCS, in addition to the General Provisions, you must be guided by the following.

In the characteristics of the work of the lower ranks of individual professions, based on the conditions of production or the nature of the work performed, it is written that the performance of these works is carried out under the guidance of a worker of a higher qualification. In such cases, workers in higher grades must be able to supervise workers in lower grades in the same trade and exercise this leadership. If, according to the conditions of production, it is necessary to assign the performance of the duties of a foreman to a worker of a higher rank, then an additional payment for foremanship is made only in cases specially stipulated in the relevant decrees.

In the "Must know" sections of the tariff and qualification characteristics in all professions, one should keep in mind the need to have knowledge within the scope of the work performed.

Characteristics of works. Disassembly and assembly of batteries, degreasing of battery vessels, filtration, preparation of distilled water and maintenance of charging station equipment under the guidance of a more qualified battery technician. Preparing batteries for repair and charging. Cleaning, washing and wiping of accumulator vessels. Cleaning of burrs and sagging after soldering at plates of connecting strips and tips. Moving bottles with acid, electrolyte, distilled water, cans of caustic potash within the workplace.

Must Know: Device Basics batteries; name of the main materials and reagents of battery production; rules for the storage of acids, alkalis and their handling, methods for determining them by appearance and other features; the name and purpose of the most common simple tools, devices.

Characteristics of works. Dismantling and assembly of accumulators of all types. Maintenance of equipment of charging stations (aggregates). Charge accumulators and accumulator batteries of all types. Replacement of rubber valves on plugs, preparation of gaskets. Voltage measurement individual elements batteries. Soldering battery connections. Determination of the density and level of electrolyte in battery cells. Preparation of an alkali solution from a crystalline caustic or a concentrated solution according to an established recipe. Closing the cracks between the lids and vessels with a cord and filling them with heated mastic. Filling and topping up cans with distilled water and electrolyte. Replacing individual cans and smearing them with mastic. Keeping records of the operation of charging stations (unit).

Must know: elementary information from electrical engineering; device and purpose of batteries; rules and modes of charging and discharging batteries; properties of used acids, alkalis and rules for handling them; purpose and conditions for the use of control measuring instruments for measuring the voltage of battery cells.

Characteristics of works. Performing simple and medium complexity repairs of batteries and batteries of various types and capacities. Identification of damage to battery cells and their elimination. Maintenance charging units. Change of electrolyte and separation in storage batteries. Preparation of pads and gaskets. Casting of lead connecting strips and tips. Installation of retaining glasses and lead gaskets in vessels. Installation of covers of block-vessels with soldering jumpers. Preparation of electrolyte according to the established recipe. Mounting and dismantling of battery cells with alignment of connecting parts. Removal of sludge from the elements of working batteries. Performing all the work provided for in the instructions for putting batteries into operation.

Must know: basics of electrical engineering; constructive device and principle of operation of the same type of batteries; circuit diagram charging unit; rules for connecting plates and their polarity; arrangement of devices and instruments used in the repair and maintenance of batteries; types of damage to battery cells and methods for their elimination; methods of work and technological sequence of operations during disassembly, assembly and repair of battery cells; basic physical and Chemical properties materials used in the repair of batteries; rules for the preparation of electrolyte for various types of batteries and batteries; instrumentation device.

Characteristics of works. Performance complex work for the repair and molding of accumulators and storage batteries of various types and capacities. Average repair of charging units. Regulation of voltage and current during charging. Identification and elimination of damage to batteries.

Maintenance of machine drive, mercury rectifier, power distribution board. Battery testing. Determination of the suitability of accumulators and batteries for further operation. Fitting of interelement connections. Determination of electrolyte quality. Preparation and execution of technical documentation before and after the repair of batteries and batteries.

Must know: constructive device and principle of operation, storage batteries of various types and capacities; arrangement of equipment for charging units; diagrams of mounting and installation of storage batteries; electrical measuring instruments and devices for measuring the density of acids, alkalis and gases; rules for the repair of batteries, distillers and charging units; physical and chemical properties of acids, alkalis, lead, paints used in battery production; methods of finding and eliminating short circuit in battery cells; techniques for straightening and cutting lead according to dimensions and drawings for making a shirt; order of withdrawal of individual elements from a working circuit; voltage levels during charging and discharging batteries.

Characteristics of works. Performance of especially difficult work on repair, molding of accumulators and rechargeable batteries different types and containers. Choice of forming mode and battery charging. Detection of marine batteries of all types before repair. Drawing up calculations of battery connection diagrams and control resistance in the charge circuit, depending on the capacity and voltage of the batteries and the power of the charging unit. Revision and testing of all types of marine stationary and portable batteries. Determination of the volume of repair of distillers. Maintenance of batteries during factory, sea and state tests on all types of ships and their delivery to the customer. Correction chemical composition electrolyte. Subforming lagging elements. Overhaul of charging units. Production of soldering works on hydrogen devices. Drawing up a circuit for disconnecting individual elements for the repair of live batteries. Maintaining records and technical documentation for the maintenance and repair of equipment and equipment of charging stations.

Must know: basics of physics and chemistry; design of storage batteries of all types and capacities; charging station equipment; rules for calculating battery connection diagrams and control resistance in the charge circuit depending on the capacity and voltage of the batteries and the power of the charging unit, the arrangement of electrical measuring instruments and devices for measuring the density of acids, alkalis and gases; rules for the repair of marine batteries, distillers and charging units; methods for determining and eliminating complex malfunctions in the operation of batteries, equipment and equipment of charging stations; the procedure and rules for keeping records of the operation of charging units and batteries and compiling the necessary technical documentation.

Characteristics of works. Maintenance of oxygen and oxygen-argon plants under the guidance of a highly qualified operator. Purging of desiccant batteries, dehumidifiers of air compressors and calciners, discharge of liquid oxygen into stationary and transport tanks. Lubrication of serviced equipment. Participation in the current repair of plant equipment and equipment. Monitoring the state of pressure in the rail and participation in filling the cylinders. Rollback and placement of cylinders in the warehouse. Coloring of cylinders different colors depending on the filling gases. Washing equipment and containers with water and solvents. Maintain documentation for filling cylinders. Checking and filling out passports for cylinders.

Characteristics of works. Doing technological process oxygen production at an oxygen plant (unit) with an oxygen capacity of up to 100 cubic meters. m/h Separator control. Production of gas analysis. Monitoring the operation of gas meters and differential pressure gauges, changes in the indicators of liquid and gaseous oxygen, nitrogen, argon and liquid air in the evaporator. Filling of cylinders and control of filling and draining of liquid oxygen into stationary and transport tanks. Regulation of the operation of automatic devices for filling cylinders with liquefied and compressed gas. Current repair of plant equipment and equipment. Maintaining control records of the operation of the installation. Monitoring the condition of the filling ramp and all its pipelines, valves and instrumentation. Control over the transportation and storage of filled cylinders.

Characteristics of works. Maintenance of the technological process for the production of gaseous oxygen and nitrogen and the selection of raw argon at oxygen, nitrogen-oxygen and oxygen-argon plants (aggregates) with an oxygen and nitrogen capacity of over 100 to 800 cubic meters. m/h raw argon up to 15 cu. m/h and liquid oxygen and nitrogen up to 500 l/h. Technological heating of the air separation unit, acetylene adsorbers. Regeneration of adsorption drying devices. Perform multiple gas analyzes. Monitoring the condition of the gas tank, ramp, liquid oxygen pump, expander, tightness and serviceability of communications and equipment. Participation in the average and major repairs of plant equipment and equipment. Control of safety devices, ventilation installations, telephone and light and sound alarms.

Must know: fundamentals of physics, chemistry and electrical engineering; technological scheme of argon production; arrangement of individual units and units of equipment for oxygen and argon plants and their purpose in the general technological scheme production of oxygen, argon and nitrogen; methods of washing and testing equipment, equipment and containers; identification and elimination of problems in the operation of installations; arrangement and purpose of complex instrumentation, safety devices and signaling means; requirements for the quality of the product; rules for the production of work on the repair of equipment, fittings and equipment.